ENGLISH

1 To display the setup wizard, click Setup Wizard in the initial main screen.

Select Install on Gateway’s DMZ port if you want to connect the ZyWALL to a gateway in your network.

Select Install as a New Gateway if you want to configure the ZyWALL both as a NAT router and an SSL VPN gateway in your network.

2 If you install the ZyWALL behind another gateway, configure the ZyWALL’s IP settings in the first first wizard screen.

If you install the ZyWALL as a new gateway, configure Internet settings in the first wizard screen.

3 Create a new remote user account to allow a remote user to log into your local network. Enter a unique user name (up to 31 characters using “0-9”, “a-z” and “A-Z”) and password (up to 64 characters using “0-9”, “a-z” and “A-Z”).

"You cannot use the admin account to access network resources.

4Specify the IP address and subnet mask of a local network behind the ZyWALL you want to allow SSL-VPN access.

Specify the range of private IP addresses to assign to the remote users and the ZyWALL. This is used for establishing an SSL-VPN connection and allow the remote users to access resources as if they are on the local network.

5