ZyXEL Communications XGS-4528F 5.1.2 Configuring DHCP Server Settings

Chapter 5 Initial Setup Example
XGS-4528F User’s Guide
62
2Open your web browser and enter 192.168.0.1 (the default MGMT port IP address) in
the address bar to access the web configurator. See Section 4.2 on page 51 for more
information.
3Click Basic Setting and IP Setup
in the navigation panel.
4Configure the related fields in the
IP Setup screen.
For the Sales network, enter
192.168.2.1 as the IP address and
255.255.255.0 as the subnet
mask.
5In the VID field, enter the ID of
the VLAN group to which you
want this IP interface to belong.
This is the same as the VLAN ID
you configure in the Static
VLAN screen.
6Click Add to save the settings to
the run-time memory. Settings in
the run-time memory are lost
when the Switch’s power is
turned off.
5.1.2 Configuring DHCP Server Settings
You can set the Switch to assign network information (such as the IP address, DNS server,
etc.) to DHCP clients on the network.
For the example network, configure two DHCP client pools on the Switch for the DHCP
clients in the RD and Sales networks.
1In the web configurator, click IP
Application and DHCP in the
navigation panel and click the
VLAN link.
2In the VLAN Setting screen,
specify the ID of the VLAN to
which the DHCP clients belong,
the starting IP address pool,
subnet mask, default gateway
address and the DNS server
address(es).
3Click Add to save the settings to
the run-time memory. Settings in
the run-time memory are lost
when the Switch’s power is
turned off.
EXAMPLE
EXAMPLE