Configuration
LANE Configuration
Item | Description |
|
|
LANE IP Address | This is the IP Address for the Broadmore 1750. To get onto the |
| ELAN, the address must be on a different logical subnet than the |
| OSC’s Ethernet IP Address. This address must be different than |
| the ATM CIP Address subnet. |
|
|
Subnet Mask | This is the subnet mask to be used in conjunction with the |
| Broadmore 1750’s LANE IP Address. |
|
|
LECS ATM | This address is optional. This is the ATM Address of the LAN |
Address | Emulation Configuration Server, LECS. If the ATM Address of |
| the LAN Emulation Server, LES, is known and is entered below, |
| this LECS value may be left blank. If the LECS is needed and no |
| address is entered here, then the “well known” ATM Address (as |
| defined by ATM Forum’s LANE standard) will be used by default. |
| The “well known” default address is 4700 7900 0000 0000 0000 |
| 0000 0000 A03E 0000 0100. |
|
|
LES ATM | This field is optional. The ATM Address of the LAN Emulation |
Address | Server is entered here. If data is entered here, the ELAN name and |
| the LECS ATM address will not be needed and will not be used by |
| the system if they are entered below. |
|
|
ELAN Name | This field is optional. If a name is entered, it will be sent to the |
| LECS to locate the LES for this ELAN. If the ELAN Name is not |
| specified, and no LES is specified, then, the default ELAN, as |
| entered in the LECS, will be used. The Broadmore 1750 is never |
| an LECS. |
|
|
LANE Version | This value will be either 1 or 2. Use the LANE version supported |
| and active in the segment’s LECS and in the other LE clients. |
|
|
Using LANE may require static routes in a manner similar to CIP. Refer to the Static Routes section above and the example in Appendix D.
Broadmore 1750 - Release 4.6 |
