Carrier Access 1750 user manual Broadmore Modules, OC-12c Network Interface Modules NIMs

Technical Specifications

Broadmore Modules

Broadmore Modules

OC-12c Network Interface Modules (NIMs)

SONET/ SDH OC-12c/ STM-4c 622.08 Mbps: network synchronization Single mode and multi-mode options

Optical connectors type: SC Premise Reach:

Type - multi-mode Wavelength - 1300 nm

Tx Output power - greater than or equal to –18.0 dBm Rx sensitivity - less than or equal to –28.0 dBm

Intermediate Reach: Type - single-mode Wavelength - 1300nm

Tx Output power - greater than or equal to –11.0 dBm Rx sensitivity- less than or equal to –28.0 dBm

DS3 (T3) Structured Circuit Emulation SAM

1 port per card

BNC connector access on rear panel IOM

CES Version 2 (AAL1) and ITU-T recommendation I.363: Structured (N x 64) DS3: (1 to 672 ATM PVCs or SVCs per port)

DS3 options: C Bit parity, M13

Clocking: Network, BITS, Adaptive, SRTS, Loop

NOTE: SRTS is a proprietary timing algorithm and may ONLY be used with specific written prior permission from Carrier Access Corporation. Additional license fees may apply.

A-6 Broadmore 1750 - Release 4.6