Post Error Messages
Numeric Codes and Text Messages
Code/Message | Beeps | Probable Cause | Recommended Action |
None | Smart Cover Lock | |
Coil is not |
| mechanism is missing |
Connected |
| or not connected. |
1.Reconnect or replace hood locking mechanism.
2.Reseat or replace hood locking mechanism cable.
None | Processor heatsink | Reseat or replace the | ||
Sensor from |
| cable not connected to | processor heatsink cable | |
Processor |
| system board. | going to the system board. | |
Heatsink is not |
|
|
|
|
Connected |
|
|
|
|
|
|
|
| |
None | Riser board not seated | Install riser board if missing or | ||
Riser not |
| or not installed. | remove and reseat to ensure | |
Detected |
|
| good connection. | |
|
|
|
|
|
2S* | Both external and | 1. | Remove any serial port | |
1 Address |
| internal serial ports are |
| expansion cards. |
Conflict Detected |
| assigned to COM1. | 2. | Clear CMOS. |
|
|
| ||
|
|
| 3. | Reconfigure card |
|
|
|
| resources and/or run |
|
|
|
| Computer Setup or |
|
|
|
| Windows utilities. |
|
|
|
|
|
2S* | Both external and | 1. | Remove any serial port | |
Port 2 Address |
| internal serial ports are |
| expansion cards. |
Conflict Detected |
| assigned to COM2. | 2. | Clear CMOS. |
|
|
| ||
|
|
| 3. | Reconfigure card |
|
|
|
| resources and/or run |
|
|
|
| Computer Setup or |
|
|
|
| Windows utilities. |
*L = Long, S = Short
Troubleshooting Guide |
