Mode | Such function allows you to verify whether network connection |
| is alive or not through ARP Detect or Ping Detect. Choose ARP |
| Detect or Ping Detect for the system to execute for WAN |
| detection. |
Ping IP | If you choose Ping Detect as detection mode, you have to type |
| IP address in this field for pinging. |
Clone MAC Address | It is available when the box of Enable is checked. Click Clone |
| MAC Address. The result will be displayed in the field of |
| MAC Address. |
After finishing all the settings here, please click OK to activate them.
DHCP
DHCP allows a user to obtain an IP address automatically from a DHCP server on the Internet. If you choose DHCP mode, the DHCP server of your ISP will assign a dynamic IP address for your router automatically. It is not necessary for you to assign any setting,
Router Name | Type in a name for the router (e.g., Vigor2750). It must be the |
| same as the name used in Syslog. |
Domain Name | Type the domain name (e.g., draytek) to fit the request of some |
| ISPs. |
Mode | Such function allows you to verify whether network connection |
| is alive or not through ARP Detect or Ping Detect. Choose ARP |
| Detect or Ping Detect for the system to execute for WAN |
| detection. |
Ping IP | If you choose Ping Detect as detection mode, you have to type |
| IP address in this field for pinging. |
124 | Vigor2750 Series User’s Guide |
