Clone MAC Address | It is available when the box of Enable is checked. Click Clone |
| MAC Address. The result will be displayed in the field of |
| MAC Address. |
After finishing all the settings here, please click OK to activate them.
PPPoE
To choose PPPoE as the accessing protocol of the internet, please select PPPoE from the Internet Access menu. The following web page will be shown.
Username | Type in the username provided by ISP in this field. |
Password | Type in the password provided by ISP in this field. |
Confirm Password | Type the password again for confirmation. |
Redial Policy | If you want to connect to Internet all the time, you can choose |
| Always On. Otherwise, choose Connect on Demand. |
Idle Time Out | Set the timeout for breaking down the Internet after passing |
| through the time without any action. When you choose Connect |
| on Demand, you have to type value here. |
MTU Size | It means Max Transmit Unit for packet. The default setting is |
| 1442. |
Vigor2750 Series User’s Guide | 125 |
