Index | Display the number of the connecting client. |
IP Address | Display the WAN IP address for the connecting client. |
MAC Address | Display the MAC Address for the connecting client. |
Connected Time | Display the connection time for the connecting client. |
| Check this box to force the system refreshing the table |
| automatically. |
Refresh | Click this button to refresh current page. |
4.9.5 Access Point Discovery
Vigor router can scan all regulatory channels and find working APs in the neighborhood. Based on the scanning result, users will know which channel is clean for usage. Also, it can be used to facilitate finding an AP for a WDS link.
This page is used to scan the existence of the APs on the wireless LAN. Please click Scan to discover all the connected APs.
Note: During the scanning process (about 5 seconds), no client is allowed to connect to Vigor.
CH | Display the channel for the scanned AP. |
SSID | Display the SSID of the scanned AP. |
BSSID | Display the MAC address of the scanned AP. |
Security | Display the encryption type of the scanned AP. |
Signal | Display the strength (in percentage) of the signal of the |
| scanned AP. |
Scan | It is used to discover all the connected AP. The results will |
| be shown on the box above this button. |
If you want the found AP applying the WDS settings, please type in the AP’s MAC address on the bottom of the page and click Bridge or Repeater. Next, click Add to. Later, the MAC address of the AP will be added on WDS settings page.
Vigor2750 Series User’s Guide | 197 |
