Draytek 2750 manual 7 WDS, AckPolicy

AckPolicy	“Uncheck” (default value) the box means the AP router
	will answer the response request while transmitting WMM
	packets through wireless connection. It can assure that the
	peer must receive the WMM packets.
	“Check” the box means the AP router will not answer any
	response request for the transmitting packets. It will have
	better performance with lower reliability.

3.7.7 WDS

WDS means Wireless Distribution System. It is a protocol for connecting two access points (AP) wirelessly. Usually, it can be used for the following application:

y y

Provide bridge traffic between two LANs through the air. Extend the coverage range of a WLAN.

To meet the above requirement, two WDS modes are implemented in Vigor router. One is Bridge, the other is Repeater. Below shows the function of WDS-bridge interface:

The application for the WDS-Repeater mode is depicted as below:

88 Vigor2750 Series User’s Guide