Husqvarna CTH2036 XP To Replace Mower Blade Drive Belt To Check and Adjust Brake, See Fig

Page 25

SERVICE AND ADJUSTMENTS

TO REPLACE MOWER BLADE DRIVE BELT

TO CHECK AND ADJUST BRAKE

(See Fig. 30)

 

(See Fig. 31)

 

Park the tractor on level surface. Engage parking brake.

Your tractor is equipped with an adjustable brake system

BELT REMOVAL -

 

which is mounted on the right side of the transaxle.

• Remove mower from tractor (See “TO REMOVE

If tractor requires more than five (5) feet to stop at highest

MOWER” in this section of this manual).

 

speed in highest gear on a level, dry concrete or paved

• Remove screws from RH mandrel cover and remove

surface, then brake must be checked and adjusted.

cover.

 

TO CHECK BRAKE

 

• Remove screws from LH mandrel cover and remove

 

• Park tractor on a level, dry concrete or paved surface,

cover.

 

depress clutch/brake pedal all the way down and en-

• Work belt off both mandrel pulleys and idler pulleys.

gage parking brake.

 

• Pull belt away from mower.

 

• Disengage transmission by placing freewheel control

BELT INSTALLATION -

 

in “transmission disengaged” position. Pull freewheel

 

control out and into the slot and release so it is held in

• Install new belt in reverse order of removal. See belt

the disengaged position.

 

routing decal located on right mandrel cover.

 

The rear wheels must lock and skid when you try to manually

• Make sure belt is in all pulley grooves and inside all

push the tractor forward. If the rear wheels rotate, the brake

belt guides.

 

 

needs to be adjusted or the pads need to be replaced.

• Install left and right mandrel covers and tighten securely.

TO ADJUST BRAKE

 

Make sure belt is in mandrel pulley cover.

 

 

• Install mower (see "To install mower" in this section of

• Depress clutch/brake pedal all the way down and en-

this manual).

 

gage parking brake.

 

 

 

• Measure distance between brake operating arm and

LH MANDREL

 

nut “A” on brake rod.

 

COVER

 

• If distance is other than 1-9/16", loosen jam nut and

RH MANDREL COVER

turn nut “A” until distance becomes 1-9/16". Retighten

 

 

 

 

jam nut against nut “A”.

 

BELT

 

• Engage transmission by placing freewheel control in

MANDREL

 

“transmission engaged” position.

 

• Road test tractor for proper stopping distance as stated

PULLEY

 

above. Readjust if necessary. If stopping distance is

 

 

 

 

still greater than five (5) feet in highest gear, further

 

 

maintenance is necessary. Replace brake pads or

 

 

contact a qualified service center.

 

 

WITH PARKING BRAKE “ENGAGED”

 

 

NUT “A”

1-9/16"

IDLER

 

 

OPERATING

PULLEY

IDLER

 

ARM

 

PULLEY

JAM NUT

 

 

 

 

MANDREL PULLEY

 

 

 

FIG. 30

 

 

 

 

 

 

02232_Hydro

 

 

DO NOT TOUCH THIS NUT. IF FURTHER BRAKE

 

 

ADJUSTMENT IS NECESSARY

 

 

CONTACT YOUR NEAREST AUTHORIZED SER-

 

 

VICE CENTER/DEPARTMENT

 

 

 

FIG. 31

25

Image 25
Contents CTH2036 XP Safe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationIII. Children ServiceIV. Towing Table of Contents Steering Wheel Seat Unassembled PartsKey Slope Sheet Tools Required for Assembly AssemblyTo Remove Tractor from CAR- TON Before Removing Tractor from SkidTo Install Bagger Components to Install Seat See FigTractor See Figs A-4D To Assemble Bagger See Figs A-5C Bagger Adjustment SeeVertical Adjustment Horizontal AdjustmentTo Assemble and Install Mulcher Plug See Fig Check Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Using the Reverse Operation System See Fig To Adjust Gauge Wheels See FigTo Operate Mower See Fig Reverse Operation System ROSTo Operate on Hills Service REMINDER/HOUR MeterTo Transport See Figs Check Engine OIL Level Before Starting the EngineADD Gasoline To Start Engine See FigMulching Mowing Tips Mowing TipsBagging See To Dump Bagger SeeTo Convert Mower See Lubrication Chart MaintenanceBlade CARESee Figs.20-22 TractorStar Pattern Blade Engine Cleaning To Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig FRONT-TO-BACK Adjustment See Figs To Level Mower HousingSee Fig To Replace Mower Blade Drive Belt To Check and Adjust BrakeTo Adjust Steering Wheel Alignment Transmission REMOVAL/REPLACEMENTFront Wheel TOE-IN/CAMBER To Adjust Carburetor To Adjust Throttle Control CableTo Replace Headlight Bulb Interlocks and RelaysOther StorageFuel System Engine OILTroubleshooting Points With attachment clutch TRACTOR- -MODEL NO. CTH2036XP 96061015800, Product no 61 SchematicElectrical KEY Part Description Chassis and Enclosures Repair Parts Drive Repair Parts Steering Assembly 532 19 Steering Wheel Engine 532 17 Control Throttle 532 18 Seat Seat AssemblyDecals Mower 532 14 67-63 Pulley Idler V-Groove Dim Mower Lift Bagger Service Notes Service Notes Warranty Statement Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe Operation532 40 36-03 Rev 11.08.06 JS

CTH2036 XP specifications

The Husqvarna CTH2036 XP is a premium riding lawn mower designed for homeowners who seek an efficient and high-performance solution for maintaining their lawns. This powerful machine brings together advanced technology, robust construction, and user-friendly features to ensure an excellent mowing experience.

One of the standout features of the CTH2036 XP is its powerful 20 HP Kohler engine. This engine provides the necessary torque and reliability to handle various mowing conditions with ease. The engine is also designed for fuel efficiency, allowing users to maximize mowing time while minimizing fuel expenses.

The CTH2036 XP boasts a 36-inch cutting deck, which is perfect for maneuvering through tight spaces and achieving a clean, even cut. The deck is equipped with three high-performance blades that ensure a superior grass-cutting experience. Additionally, the cutting height can be easily adjusted, allowing users to set the desired length for their lawn seamlessly.

Another significant characteristic of the CTH2036 XP is its ergonomic design. The mower features an adjustable high-back seat that provides comfort during extended mowing sessions. The easy-to-reach controls are intuitively placed to enhance the overall user experience, making operation simple even for those new to riding lawn mowers.

Husqvarna has also integrated several innovative technologies into the CTH2036 XP. One key feature is the warranty, which offers peace of mind through its reliable performance and durability. The addition of the Easy Start system allows for effortless starting, requiring only the turn of a key to get going.

Moreover, the mower is equipped with a robust transmission system that delivers smooth acceleration and deceleration. Users can effortlessly navigate different terrains while maintaining control over the machine. An important aspect of the CTH2036 XP is its compact size, which makes it ideal for residential properties with a moderate amount of lawn space.

In conclusion, the Husqvarna CTH2036 XP is a versatile and innovative riding lawn mower that combines power, comfort, and technology to provide an exceptional mowing experience. Whether you are looking to maintain a well-manicured lawn or tackle overgrown grass, this model stands as a top choice in the realm of residential mowers. With its reliable performance and user-centric design, the CTH2036 XP is sure to impress even the most discerning homeowners.