Husqvarna CTH2036 XP owner manual Storage, Other, Fuel System, Engine OIL, Cylinders

Page 28

STORAGE

Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more.

WARNING: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

•Clean entire tractor (See “CLEANING” in the Mainte- nance section of this manual).

•Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

•Lubricate as shown in the Maintenance section of this manual.

•Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

•Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

•Fully charge the battery for storage.

•After a period of time in storage, battery may require recharging.

•To help prevent corrosion and power leakage during long periods of storage, battery cables should be dis- connected and battery cleaned thoroughly (see “TO CLEAN BATTERY AND TERMINALS” in the Mainte- nance section of this manual).

•After cleaning, leave cables disconnected and place cables where they cannot come in contact with battery terminals.

•If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

•Empty the fuel tank by starting the engine and let it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in mini- mizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean en- gine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER(S)

•Remove spark plug(s).

•Pour one ounce of oil through spark plug hole(s) into cylinder(s).

•Turn ignition key to “START” position for a few seconds to distribute oil.

•Replace with new spark plug(s).

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your tractor indoors and cover it to give protection from dust and dirt.

•Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your tractor to rust.

IMPORTANT: NEVER COVER TRACTOR WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents CTH2036 XP Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationIII. Children ServiceIV. Towing Table of Contents Steering Wheel Seat Unassembled PartsKey Slope Sheet Assembly Tools Required for AssemblyTo Remove Tractor from CAR- TON Before Removing Tractor from SkidTo Install Bagger Components to Install Seat See FigTractor See Figs A-4D Bagger Adjustment See To Assemble Bagger See Figs A-5CVertical Adjustment Horizontal AdjustmentTo Assemble and Install Mulcher Plug See Fig Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Adjust Gauge Wheels See Fig Using the Reverse Operation System See FigTo Operate Mower See Fig Reverse Operation System ROSTo Operate on Hills Service REMINDER/HOUR MeterTo Transport See Figs Before Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See FigMowing Tips Mulching Mowing TipsBagging See To Dump Bagger SeeTo Convert Mower See Maintenance Lubrication ChartBlade CARESee Figs.20-22 TractorStar Pattern Blade Engine Cleaning To Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Replace Mower Blade Drive Belt To Check and Adjust Brake See FigTo Adjust Steering Wheel Alignment Transmission REMOVAL/REPLACEMENTFront Wheel TOE-IN/CAMBER To Adjust Throttle Control Cable To Adjust CarburetorTo Replace Headlight Bulb Interlocks and RelaysStorage OtherFuel System Engine OILTroubleshooting Points With attachment clutch Schematic TRACTOR- -MODEL NO. CTH2036XP 96061015800, Product no 61Electrical KEY Part Description Chassis and Enclosures Repair Parts Drive Repair Parts Steering Assembly 532 19 Steering Wheel Engine 532 17 Control Throttle Seat Assembly 532 18 SeatDecals Mower 532 14 67-63 Pulley Idler V-Groove Dim Mower Lift Bagger Service Notes Service Notes Warranty Statement Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX532 40 36-03 Rev 11.08.06 JS

CTH2036 XP specifications

The Husqvarna CTH2036 XP is a premium riding lawn mower designed for homeowners who seek an efficient and high-performance solution for maintaining their lawns. This powerful machine brings together advanced technology, robust construction, and user-friendly features to ensure an excellent mowing experience.

One of the standout features of the CTH2036 XP is its powerful 20 HP Kohler engine. This engine provides the necessary torque and reliability to handle various mowing conditions with ease. The engine is also designed for fuel efficiency, allowing users to maximize mowing time while minimizing fuel expenses.

The CTH2036 XP boasts a 36-inch cutting deck, which is perfect for maneuvering through tight spaces and achieving a clean, even cut. The deck is equipped with three high-performance blades that ensure a superior grass-cutting experience. Additionally, the cutting height can be easily adjusted, allowing users to set the desired length for their lawn seamlessly.

Another significant characteristic of the CTH2036 XP is its ergonomic design. The mower features an adjustable high-back seat that provides comfort during extended mowing sessions. The easy-to-reach controls are intuitively placed to enhance the overall user experience, making operation simple even for those new to riding lawn mowers.

Husqvarna has also integrated several innovative technologies into the CTH2036 XP. One key feature is the warranty, which offers peace of mind through its reliable performance and durability. The addition of the Easy Start system allows for effortless starting, requiring only the turn of a key to get going.

Moreover, the mower is equipped with a robust transmission system that delivers smooth acceleration and deceleration. Users can effortlessly navigate different terrains while maintaining control over the machine. An important aspect of the CTH2036 XP is its compact size, which makes it ideal for residential properties with a moderate amount of lawn space.

In conclusion, the Husqvarna CTH2036 XP is a versatile and innovative riding lawn mower that combines power, comfort, and technology to provide an exceptional mowing experience. Whether you are looking to maintain a well-manicured lawn or tackle overgrown grass, this model stands as a top choice in the realm of residential mowers. With its reliable performance and user-centric design, the CTH2036 XP is sure to impress even the most discerning homeowners.
Top Page Image Contents