Husqvarna CTH2036 XP owner manual Tools Required for Assembly, To Remove Tractor from CAR- TON

Page 6

ASSEMBLY

Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes are listed.

(2)

7/16" wrenches

Utility knife

(1)

3/4" wrenches

Tire pressure gauge

(1)

3/4" socket w/drive ratchet

Pliers

When right or left hand is mentioned in this manual, it means when you are in the operating position (seated behind the steering wheel).

TO REMOVE TRACTOR FROM CAR- TON

UNPACK CARTON

•Remove all accessible loose parts and parts cartons from carton.

•Cut along dashed lines on all four panels of carton. Remove end panels and lay side panels flat.

•Check for any additional loose parts or cartons and remove.

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL (See Fig. 1)

•Remove locknut and large flat washer from steering shaft.

•Position front wheels of the tractor so they are pointing straight forward.

•Slide the steering sleeve over the steering shaft.

•Position steering wheel so cross bars are horizontal (left to right) and slide onto steering wheel adapter.

•Secure steering wheel to steering shaft with locknut and large flat washer previously removed. Tighten securely.

•Snap steering wheel insert into center of steering wheel.

•Remove protective materials from tractor hood and grill.

IMPORTANT: CHECK FOR AND REMOVE ANY STAPLES IN SKID THAT MAY PUNCTURE TIRES WHERE TRACTOR IS TO ROLL OFF SKID.

6

STEERING WHEEL

INSERT

LOCK NUT

LARGE FLAT WASHER

STEERING WHEEL

STEERING

WHEEL ADAPTOR

 

STEERING

SHAFT

STEERING

SLEEVE

FIG. 1

CONNECT BATTERY (See Figs. 2)

CAUTION: Do not short battery termi- nals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparking from accidental grounding.

•If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in the Maintenance section of this manual for charging instructions).

•Remove battery cover.

•Remove terminal protective caps and discard.

•First connect RED battery cable to positive (+) ter- minal with hex bolt and keps nut as shown. Tighten securely.

•Connect BLACK grounding cable to negative (-) ter- minal with remaining hex bolt and keps nut. Tighten securely.

•Replace battery cover.

Open battery cover for:

•Inspection for secure connections (to tighten hard- ware).

•Inspection for corrosion.

•Testing battery.

•Jumping (if required).

•Periodic charging .

Page 5 Page 7
Image 6
Page 5 Page 7
Contents CTH2036 XP General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationService III. ChildrenIV. Towing Table of Contents Unassembled Parts Steering Wheel SeatKey Slope Sheet To Remove Tractor from CAR- TON AssemblyTools Required for Assembly Before Removing Tractor from SkidInstall Seat See Fig To Install Bagger Components toTractor See Figs A-4D Bagger Adjustment See To Assemble Bagger See Figs A-5CHorizontal Adjustment Vertical AdjustmentTo Assemble and Install Mulcher Plug See Fig Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Operate Mower See Fig To Adjust Gauge Wheels See FigUsing the Reverse Operation System See Fig Reverse Operation System ROSService REMINDER/HOUR Meter To Operate on HillsTo Transport See Figs ADD Gasoline Before Starting the EngineCheck Engine OIL Level To Start Engine See FigMowing Tips Mulching Mowing TipsTo Dump Bagger See Bagging SeeTo Convert Mower See Maintenance Lubrication ChartTractor Blade CARESee Figs.20-22Star Pattern Blade Engine Cleaning Service and Adjustments To Install Mower See FigTo Remove Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Replace Mower Blade Drive Belt To Check and Adjust Brake See FigTransmission REMOVAL/REPLACEMENT To Adjust Steering Wheel AlignmentFront Wheel TOE-IN/CAMBER To Replace Headlight Bulb To Adjust Throttle Control CableTo Adjust Carburetor Interlocks and RelaysFuel System StorageOther Engine OILTroubleshooting Points With attachment clutch Schematic TRACTOR- -MODEL NO. CTH2036XP 96061015800, Product no 61Electrical KEY Part Description Chassis and Enclosures Repair Parts Drive Repair Parts Steering Assembly 532 19 Steering Wheel Engine 532 17 Control Throttle Seat Assembly 532 18 SeatDecals Mower 532 14 67-63 Pulley Idler V-Groove Dim Mower Lift Bagger Service Notes Service Notes Warranty Statement Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX532 40 36-03 Rev 11.08.06 JS

CTH2036 XP specifications

The Husqvarna CTH2036 XP is a premium riding lawn mower designed for homeowners who seek an efficient and high-performance solution for maintaining their lawns. This powerful machine brings together advanced technology, robust construction, and user-friendly features to ensure an excellent mowing experience.

One of the standout features of the CTH2036 XP is its powerful 20 HP Kohler engine. This engine provides the necessary torque and reliability to handle various mowing conditions with ease. The engine is also designed for fuel efficiency, allowing users to maximize mowing time while minimizing fuel expenses.

The CTH2036 XP boasts a 36-inch cutting deck, which is perfect for maneuvering through tight spaces and achieving a clean, even cut. The deck is equipped with three high-performance blades that ensure a superior grass-cutting experience. Additionally, the cutting height can be easily adjusted, allowing users to set the desired length for their lawn seamlessly.

Another significant characteristic of the CTH2036 XP is its ergonomic design. The mower features an adjustable high-back seat that provides comfort during extended mowing sessions. The easy-to-reach controls are intuitively placed to enhance the overall user experience, making operation simple even for those new to riding lawn mowers.

Husqvarna has also integrated several innovative technologies into the CTH2036 XP. One key feature is the warranty, which offers peace of mind through its reliable performance and durability. The addition of the Easy Start system allows for effortless starting, requiring only the turn of a key to get going.

Moreover, the mower is equipped with a robust transmission system that delivers smooth acceleration and deceleration. Users can effortlessly navigate different terrains while maintaining control over the machine. An important aspect of the CTH2036 XP is its compact size, which makes it ideal for residential properties with a moderate amount of lawn space.

In conclusion, the Husqvarna CTH2036 XP is a versatile and innovative riding lawn mower that combines power, comfort, and technology to provide an exceptional mowing experience. Whether you are looking to maintain a well-manicured lawn or tackle overgrown grass, this model stands as a top choice in the realm of residential mowers. With its reliable performance and user-centric design, the CTH2036 XP is sure to impress even the most discerning homeowners.
Top Page Image Contents