To Assemble Bagger, Bagger adjustment

To Assemble Bagger

1.Front bagger tube

2.Vinyl binding

02905

•Unfold bag by pivoting front bagger tube all the way forward and pressing the bottom vinyl binding onto the tube.

•Inside the bag, install spreader bars and retainer springs onto pins on both sides of bag as shown.

•Press the vinyl bindings onto the sides of front bagger tube.

•Slide the bagger dump handle through the hole in the bagger top, install the clevis pin 10 x 44mm and secure with retainer spring.

•Push cap over end of bagger dump handle.

NOTE: For future use, the clevis pin may be removed in order to use the handle to clear the chute in the event it has become clogged.

		5
3.	Spreader bars	4
4.	Retainer spring	4
5.	Vinyl binding

2906 0

6.Dump handle tube

7.Clevis pin 10 x 44mm

8.	Retainer spring		02
		9	907
9.	Cap	9
9.	Cap
1.	Top Surfaces Even		6MM (1/4") - 9MM (3/8")

2.Horizontal Adjustment Bracket

3.Vertical Adjustment Bracket

4. Bagger Latch

02967

Bagger adjustment

For proper bag function and appearance, it may be nec- essary to adjust the bagger assembly. There should be 6mm (1/4")-9mm (3/8") gap between the bagger top and fender and the bagger top surface should be even with the top surface of the fender. To adjust bagger position:

Horizontal adjustment

•Slightly loosen the nuts securing the bagger RH and LH horizontal adjustment brackets. Loosen only enough so the brackets keep their position, but allow them to be moved.

•Move the brackets the amount forward or backward you wish the bag assembly to move. Retighten the nuts securely.

Vertical adjustment

•Slightly loosen the nuts securing the vertical adjustment brackets. Loosen only enough so the brackets keep their position, but allow them to be moved.

•Move the brackets the amount up or down you wish the bag assembly to move. Retighten the nuts securely.

•Reinstall the bagger assembly and check the bagger to fender fit. If necessary, repeat the procedure until proper fit is attained.

•After proper fit is attained, remove bagger from tractor and install bagger latch (4) to tractor back plate as shown. Tighten securely.

•Install and carefully lower bagger to actuate latch.

•Measure distance between bagger and latch as shown. If distance is not 10mm - 16mm carefully remove bagger and repeat vertical adjustment as needed.

02983

10MM (7/16") - 16MM (5/8")

To convert to bagging, mulching or discharge See "Section 5" of this manual.

CTH180 TWIN, CTH200 TWIN specifications

Husqvarna, a brand renowned for its robust outdoor power equipment, offers a range of reliable and efficient garden tractors, including the CTH200 TWIN and CTH180 TWIN models. These tractors are designed for homeowners and gardeners who require exceptional mowing performance and versatility in their lawn maintenance routine.

The Husqvarna CTH200 TWIN is equipped with a powerful twin-cylinder engine, providing ample power for a wide range of mowing tasks. This engine design not only enhances performance but also contributes to smoother operation and reduced vibration, making it easier for users to navigate their lawns. The CTH180 TWIN offers a slightly less powerful engine but retains impressive performance capabilities, making it an excellent choice for those with smaller properties while still providing the quality and durability that Husqvarna is known for.

Both models feature a durable cutting deck with a 42-inch width, allowing for efficient mowing of medium to large-sized lawns. The cutting height can easily be adjusted, giving users flexibility to achieve the desired grass length. This versatility is particularly advantageous during different seasons when grass growth patterns vary.

An ergonomic design is a key characteristic of the Husqvarna CTH series. The user-friendly controls and comfortable seat ensure that mowing is not only productive but also enjoyable. The incorporated cruise control feature allows for consistent speed while mowing, reducing operator fatigue during long mowing sessions.

Moreover, the CTH200 TWIN and CTH180 TWIN are equipped with advanced technology like the intuitive pedal-operated transmission system, which allows for smooth and precise speed changes. This feature makes navigating tight spaces and avoiding obstacles a breeze.

Both models come with a grass collector option as an add-on, enabling users to collect clippings efficiently for a clean finish and easier lawn care. The durable construction of these tractors ensures they can withstand the rigors of regular use while maintaining performance over time.

Lastly, Husqvarna stands out in its commitment to environmentally friendly practices. The engines in the CTH200 TWIN and CTH180 TWIN are designed with fuel efficiency in mind, reducing emissions without sacrificing power.

In summary, the Husqvarna CTH200 TWIN and CTH180 TWIN models are ideal choices for anyone who seeks reliability, power, and user-friendly features in their lawn tractor. With their advanced technologies, adjustable cutting options, and ergonomic design, these tractors provide an excellent mowing experience that meets the diverse needs of modern gardeners.