CONTROLS
Manual Lifting Lever with Foot Assist for the Mower Deck
The lifting lever is used to place the mower deck in the transport position or one of the 17 different cutting height positions.
The cutting height is set by placing a pin in the hole for the desired cutting height and the pin is then locked on the inside (hidden in the illustration) with the supplied cotter pin.
1.Pull the lever backward while pushing on the foot pedal, lifting the deck to the locked position. The deck is then raised.
2.Depress the lock handle, counter hold, and move the lifting lever forward toward the pin to engage the set cutting height. The deck is then lowered.
3.The lifting lever can also be used to temporarily adjust the cutting height, such as when passing a minor bump in the lawn.
The mower deck’s lifting leer and foot pedal
IMPORTANT INFORMATION
In order to obtain an even cutting height it is important that the air pressure in all four tires is the same (16 psi).
Hydraulic Lift for the Mower Deck
1.Place pin in the appropriate hole for desired cutting height, secure with cotter pin.
2.Push switch forward on the console to lower deck to the set cutting height.
3.Pull backwards on the switch on the console to raise the deck for transport.
IMPORTANT INFORMATION | Hydraulic switch |
Pin must be locked into a hole for trans- port or mowing.
24