Husqvarna BCZ3200DL, BCZ3200DW owner manual Operation, Starting Engine, Stopping Engine

Page 10

BCZ3200DL / BCZ3200DW

8. Operation

STARTING ENGINE

WARNING

The cutting head will start rotating upon the engine starts.

1.Feed fuel into the fuel tank and tighten the cap se- curely.

2.Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects, as it will start rotating upon starting of the engine.

3.Push the primer pump several times until overflown fuel flows out in the clear tube.

4. Move the choke lever to the closed position.

(1)

(2)

(1) choke lever

 

(2) close

(3)

(3) open

5. Set the ignition switch to the “I” position. Set the throttle lever to the start position (1 → 2 → 3).

Place the unit on a flat, firm place.

Keep the cutting head clear of everything around it.

Stop Start

3. Ignition switch

1

 

START

2

6.While holding the unit firmly, pull out the starter rope quickly until engine fires.

GB-10

WARNING

The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to ro- tate as soon as the engine is started by putting the throttle into the start position. When starting the en- gine, place the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into con- tact with any obstacle when the engine starts.

IMPORTANT

•Avoid pulling the rope to its end or returning it by re- leasing the knob. Such actions can cause starter fail- ures.

7.Move the choke lever downward to open the choke. And restart engine.

8.Allow the engine to warm up for a several minutes before starting operation.

NOTE

1.When restarting the engine immediately after stop- ping it, leave the choke open.

2.Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it.

STOPPING ENGINE

Stop Start

Ignition switch

START

1.Release the throttle lever and run the engine for half a minute.

2.Shift the ignition switch to the STOP position.

IMPORTANT

•Except for an emergency, avoid stopping the engine

while pulling the throttle lever.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents BCZ3200DL BCZ3200DW Explanation of Symbols and Safety Warnings Contents Parts locationBCZ3200DL / BCZ3200DW SpecificationSymbols on the machine Never modify your machineWorking Circumstance For safe operationWorking Condition Working PlanBefore Starting Engine Using the ProductStarting the Engine Handling Fuel MaintenanceIf Someone Comes TransportationSet up Fuel Cutting head will start rotating upon the engine starts OperationStarting Engine Stopping EngineCutter Application Chart Adjusting Throttle CableAdjusting Idling Speed Metal Blade UsageCutting Work Line Head Usage Cutting MethodControlling Blade Bounce Trimming Grass and WeedsAdjusting the Line Length MaintenancePoint AIR Filter Replacement Plug is a Champion RZ7CRefilling Trimming Line Fuel FilterStorage Limited warranty Troubleshooting guideCheck Probable Causes Action Garden Strimmers

BCZ3200DW, BCZ3200DL specifications

The Husqvarna BCZ3200DL and BCZ3200DW are advanced brushcutters designed for maximum performance and efficiency in tackling demanding landscaping tasks. With a robust engine and an ergonomic design, these models are perfect for both professional landscapers and avid gardeners alike.

One of the standout features of the BCZ3200DL and BCZ3200DW is their powerful 32cc engine, which delivers impressive power while maintaining fuel efficiency. This two-stroke engine is engineered for reliability and performance, ensuring that users can rely on it for continuous operation during extensive outdoor jobs. The S-shaped shaft provides excellent maneuverability, allowing users to navigate around obstacles with ease.

Both models come equipped with Husqvarna's innovative LowVib technology, which significantly reduces vibrations experienced during operation. This feature not only enhances user comfort but also minimizes fatigue during prolonged use. The lightweight construction of these brushcutters further adds to their user-friendliness, making them easy to handle over extended periods.

Another significant advantage of the BCZ3200DL and BCZ3200DW is the Tap 'n Go trimmer head, which allows for quick and easy line adjustments. This feature means that users can extend the trimmer line simply by tapping the head against the ground, minimizing downtime and keeping the workflow uninterrupted. The dual-line cutting system ensures efficient trimming and cutting, making it ideal for tackling thick grass and rugged terrain.

Safety is also a priority in these models, featuring a robust guard that protects the operator from debris. Additionally, the controls are intuitively positioned for easy access, ensuring that users can operate the brushcutter safely and effectively without compromising on performance.

Durability is a hallmark of Husqvarna’s design philosophy; both the BCZ3200DL and BCZ3200DW are built to withstand regular use in challenging environments, offering longevity and reliable service. With a combination of innovative technology, comfort, and efficiency, these brushcutters stand out as valuable tools for various landscaping tasks, making them excellent choices for anyone looking to enhance their gardening experience. Whether you’re edging, trimming, or clearing thick brush, the BCZ3200DL and BCZ3200DW offer the power and precision needed to get the job done.
Top Page Image Contents