Cutting Method, Controlling Blade Bounce

BCZ3200DL / BCZ3200DW

8. Operation

CUTTING METHOD

(a)Use the front left side cutting.

(b)Guide the blade from your right to left with it tilted slightly to your left.

(c)When mowing a wide area, start working from your left end to avoid interference of cut grass.

(d)The blade may be seized by weeds if the engine speed is too low, or the blade cuts too deep into weeds. Adjust the engine speed and cutting depth according to the condition of object.

WARNING

•If the grass or other object gets caught in the blade, or if the unit starts to shake or vibrate, turn off the engine and check the whole unit. Change the blade if it has been damaged.

•Turn off the engine and make sure the blade has com- pletely stop before checking the blade, and remov- ing any object got caught in.

WARNING

CONTROLLING BLADE BOUNCE

•Kick out can cause serious personal injury. Carefully study this section. It is important that you understand what causes kick out, how you can reduce the chance of kick out and how you can remain in control of the unit if kick out does occur.

1. What causes kick out:

•Kick out can occur when the moving blade contacts an object that it cannot cut. This contact causes the blade to stop for an instant and then suddenly move or ”bounce” away from the object that was hit. The operator can lose control of the unit and the blade can cause serious personal injury to the operator or any person nearby if the blade contacts any part of the body.

2.How you can reduce the chance of kick out: a. Recognize that kick out can happen. By understand- ing and knowing about bounce, you can help elimi-

nate the element of surprise.

b. Cut fibrous weeds and grass only. Do not let the blade contact materials it cannot cut such as hard, woody vines and brush or rocks, fences, metal, etc

GB-12

c.Be extra prepared for bounce if you must cut where you cannot see the blade making contact such as in areas of dense growth.

d.Keep the blade sharp. A dull blade increase the chance of bounce.

e.Avoid feeding the blade too rapidly. The blade can bounce away from material being cut if the blade is fed faster than its cutting capability.

f.Cut only from your right to your left.

g.Keep your path of advance clear of material that has been cut and other debris.

3. How you can maintain the best control:

a.Keep a good, firm grip on the unit with both hands. A firm grip can help neutralize bounce. Keep your right and left hands completely around the respective handles.

b.Keep both feet spread apart in a comfortable stance and yet braced for the possibility that the unit could bounce. Do not overreach. Keep firm footing and balance.

CUTTING WORK (LINE HEAD USAGE)

WARNING

1.Always wear eye protection such as safety goggles. Never lean over the rotating cutting head. Rocks or other debris could be thrown into eyes and face and cause serious personal injury.

2.Keep the debris guard in place at all times when the unit is operated.

TRIMMING GRASS AND WEEDS

•Always remember that the TIP of the line does cut- ting. You will achieve better results by not crowding the line into the cutting area. Allow the unit to trim at its own pace.

1.Hold the unit so the head is off the ground and is tilted about 20 degrees toward the sweep direction.

2.You can avoid thrown debris by sweeping from your left to the right.

BCZ3200DW, BCZ3200DL specifications

The Husqvarna BCZ3200DL and BCZ3200DW are advanced brushcutters designed for maximum performance and efficiency in tackling demanding landscaping tasks. With a robust engine and an ergonomic design, these models are perfect for both professional landscapers and avid gardeners alike.

One of the standout features of the BCZ3200DL and BCZ3200DW is their powerful 32cc engine, which delivers impressive power while maintaining fuel efficiency. This two-stroke engine is engineered for reliability and performance, ensuring that users can rely on it for continuous operation during extensive outdoor jobs. The S-shaped shaft provides excellent maneuverability, allowing users to navigate around obstacles with ease.

Both models come equipped with Husqvarna's innovative LowVib technology, which significantly reduces vibrations experienced during operation. This feature not only enhances user comfort but also minimizes fatigue during prolonged use. The lightweight construction of these brushcutters further adds to their user-friendliness, making them easy to handle over extended periods.

Another significant advantage of the BCZ3200DL and BCZ3200DW is the Tap 'n Go trimmer head, which allows for quick and easy line adjustments. This feature means that users can extend the trimmer line simply by tapping the head against the ground, minimizing downtime and keeping the workflow uninterrupted. The dual-line cutting system ensures efficient trimming and cutting, making it ideal for tackling thick grass and rugged terrain.

Safety is also a priority in these models, featuring a robust guard that protects the operator from debris. Additionally, the controls are intuitively positioned for easy access, ensuring that users can operate the brushcutter safely and effectively without compromising on performance.

Durability is a hallmark of Husqvarna’s design philosophy; both the BCZ3200DL and BCZ3200DW are built to withstand regular use in challenging environments, offering longevity and reliable service. With a combination of innovative technology, comfort, and efficiency, these brushcutters stand out as valuable tools for various landscaping tasks, making them excellent choices for anyone looking to enhance their gardening experience. Whether you’re edging, trimming, or clearing thick brush, the BCZ3200DL and BCZ3200DW offer the power and precision needed to get the job done.