Maintenance, Adjusting the Line Length, Point

8. Operation

3.Use a slow, deliberate action to cut heavy growth. The rate of cutting motion will depend on the material being cut. Heavy growth will require slower action than will light growth.

4.Never swing the unit so hard as you are in danger of losing your balance or control of the unit.

5.Try to control the cutting motion with the hip rather than placing the full workload on the arm and hands.

6.Take precautions to avoid wire, grass and dead, dry, long-stem weeds from wrapping around the head shaft. Such materials can stall the head and cause the clutch to slip, resulting in damage to the clutch system if repeated frequently.

BCZ3200DL / BCZ3200DW

ADJUSTING THE LINE LENGTH

• Your brush cutter is equipped with a semi- auto type
	nylon line head that allows the operator to advance
	the line without stopping the engine. When the line
	becomes short, lightly tap the head on the ground	G
	while running the engine at full throttle.	B
		B
•	Each time the head is bumped, the line advances
	about 25 mm. For better effect, tap the head on bear
	ground or hard soil. Avoid bumping in thick, tall grass
	as the engine may stall by overload.

9. Maintenance

				Every	Every	Every
	System/components	Procedure	Before	25	50	100	Note
	System/components	Procedure	use	hours	hours	hours	Note
			use	hours	hours	hours
				after	after	after
	fuel leaks, fuel spillage	wipe out	✔
	fuel tank, air filter, fuel filter	inspect/clean	✔	✔			replace, if necessary
	idle adjusting screw	see adjusting	✔				replace carburetor
ENGINE	idle adjusting screw	idling speed	✔				if necessary
ENGINE

	spark plug	clean and readjust			✔		GAP: .025 in (0.6-0.7 mm)
	spark plug	plug gap			✔		replace, if necessary
		plug gap					replace, if necessary
	cylinder fins, intake air cooling vent	clean		✔
	muffler, spark arrester, cylinder exhaust port	clean			✔
	throttle lever, ignition switch	check operation	✔
	cutting parts	replace if	✔
SHAFT	cutting parts	something’s wrong	✔
SHAFT

	gear case	grease		✔
	screws/nuts/bolts	tighten/replace	✔			✔	not adjusting screws
	debris guard	make sure to attach	✔

BLADE

•Check the blade and the fasteners for looseness, cracking, or bending.

•Check the cutting edges and reform with a flat file.

Point :

1.Keep the end corner sharp.

2.Round the root of the edge, using round file.

3.Do not use water when using a grinder.

(A) 8-teeth blade

(B) 3-teeth blade

(A)

•It is recommended that filing should be done by pro- fessionals.

•Especially regarding filing the saw blade, Leave it to the professionals.

(B)

GB-13

BCZ3200DW, BCZ3200DL specifications

The Husqvarna BCZ3200DL and BCZ3200DW are advanced brushcutters designed for maximum performance and efficiency in tackling demanding landscaping tasks. With a robust engine and an ergonomic design, these models are perfect for both professional landscapers and avid gardeners alike.

One of the standout features of the BCZ3200DL and BCZ3200DW is their powerful 32cc engine, which delivers impressive power while maintaining fuel efficiency. This two-stroke engine is engineered for reliability and performance, ensuring that users can rely on it for continuous operation during extensive outdoor jobs. The S-shaped shaft provides excellent maneuverability, allowing users to navigate around obstacles with ease.

Both models come equipped with Husqvarna's innovative LowVib technology, which significantly reduces vibrations experienced during operation. This feature not only enhances user comfort but also minimizes fatigue during prolonged use. The lightweight construction of these brushcutters further adds to their user-friendliness, making them easy to handle over extended periods.

Another significant advantage of the BCZ3200DL and BCZ3200DW is the Tap 'n Go trimmer head, which allows for quick and easy line adjustments. This feature means that users can extend the trimmer line simply by tapping the head against the ground, minimizing downtime and keeping the workflow uninterrupted. The dual-line cutting system ensures efficient trimming and cutting, making it ideal for tackling thick grass and rugged terrain.

Safety is also a priority in these models, featuring a robust guard that protects the operator from debris. Additionally, the controls are intuitively positioned for easy access, ensuring that users can operate the brushcutter safely and effectively without compromising on performance.

Durability is a hallmark of Husqvarna’s design philosophy; both the BCZ3200DL and BCZ3200DW are built to withstand regular use in challenging environments, offering longevity and reliable service. With a combination of innovative technology, comfort, and efficiency, these brushcutters stand out as valuable tools for various landscaping tasks, making them excellent choices for anyone looking to enhance their gardening experience. Whether you’re edging, trimming, or clearing thick brush, the BCZ3200DL and BCZ3200DW offer the power and precision needed to get the job done.