Husqvarna BCZ3200DW Adjusting Throttle Cable, Adjusting Idling Speed, Cutter Application Chart

Page 11

8. Operation

ADJUSTING THROTTLE CABLE

•The normal play is 1 or 2 mm when measured at the carburetor side end. Readjust with the cable adjuster as required.

.04 in

 

(1-2 mm)

(1)

(1) Cable adjuster

ADJUSTING IDLING SPEED

(1)

(1)Idle adjusting screw

1.When the engine tends to stop frequently at idling mode, turn the adjusting screw clockwise.

2.When the cutting head keeps rotating after releasing the trigger, turn the adjusting screw counter-clockwise.

NOTE

• Warm up the engine before adjusting the idling speed.

CUTTER APPLICATION CHART

•Replace by a suitable recommended cutting attach- ment according to the object to be cut.

•When replacing blade always be sure to use products which have been certified by KOMATSU ZENOAH.

WARNING

•When sharpening, removing, or reattaching the blade, be sure to wear thick, sturdy gloves and use only proper tools and equipment to prevent injury.

T3189-15102

BCZ3200DL / BCZ3200DW

METAL BLADE USAGE

1.

Check the nut to fasten the blade and be sure the nut

 

 

has no fault, and no abrasion.

 

2.

Be sure that the blade and the holder have been fas-

 

 

tened according to instruction and the blade turns

G

 

smoothly without abnormal noise.

B

 

 

WARNING

•The rotating parts fastened incorrectly may cause serious accident to the operator.

•Make sure that the blade is not bent, warped, cracked, broken or damaged.

•If you find any error to the blade, discard it and change new one which is certified by

KOMATSU ZENOAH.

•By using the shoulder strap, hang the unit on your right side. Adjust the strap length so that the cutting head may become parallel to the ground.

WARNING

•Make sure to use shoulder strap and debris guard. If not, it is vary dangerous when you slip or lose your balance.

GB-11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents BCZ3200DL BCZ3200DW Explanation of Symbols and Safety Warnings Parts location ContentsNever modify your machine SpecificationSymbols on the machine BCZ3200DL / BCZ3200DWWorking Plan For safe operationWorking Condition Working CircumstanceStarting the Engine Using the ProductBefore Starting Engine Transportation MaintenanceIf Someone Comes Handling FuelSet up Fuel Stopping Engine OperationStarting Engine Cutting head will start rotating upon the engine startsMetal Blade Usage Adjusting Throttle CableAdjusting Idling Speed Cutter Application ChartTrimming Grass and Weeds Cutting MethodControlling Blade Bounce Cutting Work Line Head UsagePoint MaintenanceAdjusting the Line Length Fuel Filter Replacement Plug is a Champion RZ7CRefilling Trimming Line AIR FilterStorage Check Probable Causes Action Troubleshooting guideLimited warranty Garden Strimmers

BCZ3200DW, BCZ3200DL specifications

The Husqvarna BCZ3200DL and BCZ3200DW are advanced brushcutters designed for maximum performance and efficiency in tackling demanding landscaping tasks. With a robust engine and an ergonomic design, these models are perfect for both professional landscapers and avid gardeners alike.

One of the standout features of the BCZ3200DL and BCZ3200DW is their powerful 32cc engine, which delivers impressive power while maintaining fuel efficiency. This two-stroke engine is engineered for reliability and performance, ensuring that users can rely on it for continuous operation during extensive outdoor jobs. The S-shaped shaft provides excellent maneuverability, allowing users to navigate around obstacles with ease.

Both models come equipped with Husqvarna's innovative LowVib technology, which significantly reduces vibrations experienced during operation. This feature not only enhances user comfort but also minimizes fatigue during prolonged use. The lightweight construction of these brushcutters further adds to their user-friendliness, making them easy to handle over extended periods.

Another significant advantage of the BCZ3200DL and BCZ3200DW is the Tap 'n Go trimmer head, which allows for quick and easy line adjustments. This feature means that users can extend the trimmer line simply by tapping the head against the ground, minimizing downtime and keeping the workflow uninterrupted. The dual-line cutting system ensures efficient trimming and cutting, making it ideal for tackling thick grass and rugged terrain.

Safety is also a priority in these models, featuring a robust guard that protects the operator from debris. Additionally, the controls are intuitively positioned for easy access, ensuring that users can operate the brushcutter safely and effectively without compromising on performance.

Durability is a hallmark of Husqvarna’s design philosophy; both the BCZ3200DL and BCZ3200DW are built to withstand regular use in challenging environments, offering longevity and reliable service. With a combination of innovative technology, comfort, and efficiency, these brushcutters stand out as valuable tools for various landscaping tasks, making them excellent choices for anyone looking to enhance their gardening experience. Whether you’re edging, trimming, or clearing thick brush, the BCZ3200DL and BCZ3200DW offer the power and precision needed to get the job done.
Top Page Image Contents