Husqvarna BCZ3200DL, BCZ3200DW Refilling Trimming Line, AIR Filter, Fuel Filter, Spark Plug

Page 14

BCZ3200DL / BCZ3200DW

9. Maintenance

REFILLING TRIMMING LINE

1.For replacement line, use a diameter of 2.4mm(.095in). The spool is capable for a line upto 6m(20ft) on the 10cm(4”) head. Avoid using a larger line as it may cut down the trimming performance.

WARNING

• For safety reasons, do not use metalreinforced line.

2.Pinch the slotted area on the both sides of the spool housing to unhook the bottom cap.

3.Take out the spool and pull off the old line. Put one end of new line through the spool holes and pull it until the length is equal between each part of the line.

4.Wind up the line in the correct direction as indicated on the spool.

5.Hook each end of the line in the slot on the edge of the spool, and then put the ends through the eyelets on the housing. Make sure that the spring and the washers are in place.

6.While holding the spool against the housing, pull the line ends to release them from the slot.

7.Line up the slot on the bottom cap with the hook on the housing, press the cap against the housing until it clicks.

WARNING

•Make sure that the engine has stopped and is cool before performing any service to the machine. Con- tact with moving cutting head or hot muffler may result in a personal injury.

AIR FILTER

•The air filter, if clogged, will reduce the engine perfor- mance. Check and clean the filter element in warm, soapy water as required. Dry completely before in- stalling. If the element is broken or shrunk, replace with a new one.

(1) Air filter

(1)

FUEL FILTER

•When the engine runs short of fuel supply, check the fuel cap and the fuel filter for blockage.

(1) Fuel filter

(1)

SPARK PLUG

•Starting failure and misfiring are often caused by a fouled spark plug. Clean the spark plug and check that the plug gap is in the correct range. For a re- placement plug, use the correct type specified by

KOMATSU ZENOAH.

0.6-0.7 mm

•REPLACEMENT PLUG IS A CHAMPION RZ7C.

GB-14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents BCZ3200DL BCZ3200DW Explanation of Symbols and Safety Warnings Contents Parts locationBCZ3200DL / BCZ3200DW SpecificationSymbols on the machine Never modify your machineWorking Circumstance For safe operationWorking Condition Working PlanStarting the Engine Using the ProductBefore Starting Engine Handling Fuel MaintenanceIf Someone Comes TransportationSet up Fuel Cutting head will start rotating upon the engine starts OperationStarting Engine Stopping EngineCutter Application Chart Adjusting Throttle CableAdjusting Idling Speed Metal Blade UsageCutting Work Line Head Usage Cutting MethodControlling Blade Bounce Trimming Grass and WeedsPoint MaintenanceAdjusting the Line Length AIR Filter Replacement Plug is a Champion RZ7CRefilling Trimming Line Fuel FilterStorage Check Probable Causes Action Troubleshooting guideLimited warranty Garden Strimmers

BCZ3200DW, BCZ3200DL specifications

The Husqvarna BCZ3200DL and BCZ3200DW are advanced brushcutters designed for maximum performance and efficiency in tackling demanding landscaping tasks. With a robust engine and an ergonomic design, these models are perfect for both professional landscapers and avid gardeners alike.

One of the standout features of the BCZ3200DL and BCZ3200DW is their powerful 32cc engine, which delivers impressive power while maintaining fuel efficiency. This two-stroke engine is engineered for reliability and performance, ensuring that users can rely on it for continuous operation during extensive outdoor jobs. The S-shaped shaft provides excellent maneuverability, allowing users to navigate around obstacles with ease.

Both models come equipped with Husqvarna's innovative LowVib technology, which significantly reduces vibrations experienced during operation. This feature not only enhances user comfort but also minimizes fatigue during prolonged use. The lightweight construction of these brushcutters further adds to their user-friendliness, making them easy to handle over extended periods.

Another significant advantage of the BCZ3200DL and BCZ3200DW is the Tap 'n Go trimmer head, which allows for quick and easy line adjustments. This feature means that users can extend the trimmer line simply by tapping the head against the ground, minimizing downtime and keeping the workflow uninterrupted. The dual-line cutting system ensures efficient trimming and cutting, making it ideal for tackling thick grass and rugged terrain.

Safety is also a priority in these models, featuring a robust guard that protects the operator from debris. Additionally, the controls are intuitively positioned for easy access, ensuring that users can operate the brushcutter safely and effectively without compromising on performance.

Durability is a hallmark of Husqvarna’s design philosophy; both the BCZ3200DL and BCZ3200DW are built to withstand regular use in challenging environments, offering longevity and reliable service. With a combination of innovative technology, comfort, and efficiency, these brushcutters stand out as valuable tools for various landscaping tasks, making them excellent choices for anyone looking to enhance their gardening experience. Whether you’re edging, trimming, or clearing thick brush, the BCZ3200DL and BCZ3200DW offer the power and precision needed to get the job done.
Top Page Image Contents