CONTROLS
Relays
The relays and glow plug timer are located in a holder to the right side of the seat.
2
13
RUN
RELAY
START
RELAY
Tracking
The tracking knob is located in front of the left control lever. Rotating this knob allows fine tuning adjustments so that the machine tracks straight with the drive levers in the full forward position. Rotate the knob colockwise (as viewed from the operating position) to increase the speed or counterclockwise to devrease the speed on the left control lever. Example: If control levers are full forward and the unit turns to the right, turn the tracking knob counterclockwise to decrease the speed on the left control lever.
Accessories
For mulching, there is a Mulch Kit attachment available. This is mounted underneath the mower deck and comprised of baffles and mulch blades.
ROPS (Roll Over Protection System) is also available for the unit.
A baffle kit is available for the TRD61B - 61" and TRD72B - 72" cutting decks.
Relays
1.Glow plug timer
2.Glow plug relay
3.Run relay
4.Start relay
5.Seat relay
Tracking knob
Mulch kit attachment