Husqvarna 281XP, 288XP manual Cutting equipment designed to minimise kickback, Bar, Saw chain

Page 11

SAFETY INSTRUCTIONS

1Cutting equipment designed to minimise kickback

!Faulty cutting equipment or the wrong combination of bar and chain increases the risk of kickback. Use only the bar and chain combinations recommended in the ”Technical data” section.

The only way to avoid kickback is to make sure that the kick- back zone of the bar never touches anything.

By using cutting equipment with “built-in” kickback protection and keeping the chain sharp and well-maintained you can reduce the effects of kickback.

A Bar

The smaller the tip radius the smaller the kickback zone and the lower the chance of kickback.

B Saw chain

A saw chain is made up of a number of links, which are available in standard and low-kickback versions.

None

Standard Low-kickback

CUTTING LINK

DRIVE LINK

SIDE LINK

Combining these links in different ways gives different degrees of kickback reduction. In terms of kickback reduction alone, four different types of link are available.

Kickback reduction

Cutting link

Drive link

Side link

LOW

STANDARD

HIGH

EXTRA HIGH

CSome terms that describe the bar and chain

When the cutting equipment supplied with your saw becomes worn or damaged you will need to replace it. Use only the type of bar and chain recommended by us. See the ”Technical data” section to find out which equipment is recommended for your saw.

Bar

• LENGTH (inches/cm)

• NUMBER OF TEETH ON BAR TIP SPROCKET (T). Small number = small tip radius = low-kickback

CHAIN PITCH (inches) The spacing between the drive links of the chain must match the spacing of the

teeth on the bar tip sprocket and drive sprocket.

NUMBER OF DRIVE LINKS The number of drive links is determined by the length of

the bar, the chain pitch and the number of teeth on the bar tip sprocket.

• BAR GROOVE WIDTH (inches/mm)

The groove in the bar must match the width of the chain drive links.

SAW CHAIN OIL HOLE AND HOLE FOR CHAIN

TENSIONER

The bar must be matched to the chain saw design.

Saw chain

• SAW CHAIN PITCH (inches)

Spacing between drive links.

• DRIVE LINK WIDTH (mm/ inches)

• NUMBER OF DRIVE LINKS

• LEVEL OF KICKBACK REDUCTION

The level of kickback reduction offered by a chain is indicated by its model number.

See the ”Technical data” section to find the model numbers of chains that are recommended for use with your saw.

English – 11

Image 11
Contents 101 90 288XP/XP LiteSymbols KEY to SymbolsContents Personal Protective Equipment Safety InstructionsChain SAW Safety Equipment Chain brake and front hand guard Right hand guard Throttle lockChain catcher Muffler Stop switchVibration damping system Checking the brake trigger Checking brake band wearChecking the front hand guard Checking the automatic brakeThrottle lock 5 basic rules Cutting EquipmentSome terms that describe the bar and chain Cutting equipment designed to minimise kickbackBar Saw chainSharpening cutting teeth Sharpening your chain and adjusting raker clearanceGeneral information on sharpening cutting teeth Tensioning the chain General advice on setting raker clearanceSetting the raker clearance Never use waste oil Lubricating cutting equipmentChain oil Filling with chain oilLubricating the bar tip sprocket Checking chain lubricationLubricating the clutch drum bearing Checking wear on cutting equipmentWhat is kickback? HOW to Avoid KickbackNever use the saw one- handed General rulesDo not let go of the handles 10 ft General Safety PrecautionsMin m General Working Instructions Basic safety rulesCutting Basic cutting techniqueGeneral TermsFelling direction Tree felling techniqueSafe distance LimbingFelling Clearing the trunk and preparing your retreatFreeing a Trapped tree General adviceFreeing a tree that has fallen badly = high accident risk Cutting the trunk into logsWhat is WHAT? Mounting guide bar and chain AssemblyFuelmix Fuel Handling10ft FuellingMin 3 m Warm engine Start and StopStart Cold engineCarburetor MaintenanceTensioning the recoil spring Starter device assemblyStarter device Changing a broken or worn starter cordMuffler Adjusting the oil pumpAir filter Spark plugCooling system Needle bearing maintenance Winter useTemperature 0oC 32oF or colder Temperature -5oC 23oF or colderMonthly maintenance Weekly maintenance Daily maintenanceTechnical Data Your Warranty Rights Obligations Federal Emission Control Warranty Statement1998W48

281XP, 288XP, 288XP, 288XP Lite specifications

The Husqvarna 288XP is a legendary chainsaw, renowned for its power and performance in the realm of forestry and woodcutting. This heavy-duty saw was designed for professional use, particularly suited for logging and milling tasks. One of its standout features is its high-output 88cc engine, which delivers robust power and exceptional torque. This makes the 288XP ideal for handling large trees and tough cutting jobs, ensuring efficiency and effectiveness in demanding situations.

The chainsaw is equipped with advanced technologies that enhance its performance. Among these technologies is the Air Injection system, which uses centrifugal force to remove large particles before they reach the air filter, promoting better engine efficiency and reducing maintenance needs. Additionally, the 288XP has a state-of-the-art ignition system that ensures easy starting, reducing downtime on the job.

Another noteworthy variant, the 288XP Lite, retains the same powerful engine but is designed with a lighter construction in mind. This makes the saw easier to handle and less fatiguing for extended use, catering especially to professionals who require mobility without sacrificing power.

The Husqvarna 281XP, often considered a sibling to the 288XP, offers slightly less displacement but is equally potent. With its 72cc engine, the 281XP is ideal for a variety of cutting tasks, from felling trees to limbing. It combines an efficient air filtration system with a lightweight design, providing versatility and ease of use for a range of users, from amateurs to seasoned professionals.

All models in the XP series showcase excellent ergonomics, including padded handles and an anti-vibration system, which significantly reduces operator fatigue and increases comfort during prolonged use. The chainsaw's build quality is robust, featuring high-grade materials that withstand the rigors of intensive work environments.

In summary, the Husqvarna 288XP, 288XP Lite, and 281XP are exemplary tools within the professional chainsaw segment. Each model brings unique features and benefits, yet they all share a commitment to power, efficiency, and user comfort. Whether you opt for the powerhouse 288XP or the more maneuverable 281XP, each chainsaw is engineered to deliver superior performance to meet the demands of the toughest jobs.