Husqvarna 15V2 AWD manual Transport

Page 11

SAFETY INSTRUCTIONS

•Be especially careful when handling battery acid. Acid on the skin can cause serious corrosive injuries. In the event of spillage on the skin wash immediately with water.

•Acid in the eyes can cause blindness, contact a doctor immediately.

•Take care with battery maintenance. Explosive gases form in the battery. Never perform maintenance on the battery while smoking or in the vicinity of open flames or sparks. This can cause the battery to explode and cause serious injuries.

•Make sure all nuts and bolts are tightened correctly and that the equipment is in good condition.

•Do not modify safety equipment. Check regularly to be sure it works properly. The machine must not be driven if protective plates, protective covers, safety switches or other protective devices are not fitted or are defective.

•Observe the risk of injury caused by moving or hot parts if the engine is started with the engine cover open or protective cowlings removed.

•Do not change the setting of governors and avoid running the engine at excessively high revs. If you run too fast, you risk damaging the machine components.

•Never use the machine indoors or in spaces lacking proper ventilation. Exhaust fumes contain carbon monoxide, an odourless, poisonous and highly dangerous gas.

•Stop and inspect the equipment if you run over or into anything. If necessary, make repairs before starting.

•Never make adjustments with the engine running.

•The machine is tested and approved only with the equipment originally provided or recommended by the manufacturer.

•The blades are sharp and can cause cuts. Wrap the blades or wear protective gloves when handling them.

•Check regularly that the parking brake works. Adjust and maintain as required.

•The mulching unit should only be used where better quality mowing is required and in known areas.

•Reduce the risk of fire by removing grass, leaves and other debris that may have fastened on the machine. Allow the machine to cool before putting it in storage.

Transport

IMPORTANT INFORMATION

The parking brake is not sufficient to lock the machine during transport. Ensure you secure the machine firmly to the transporting vehicle.

•The machine is heavy and can cause serious crush injuries. Take extra care when loading it onto or off a vehicle or trailer.

•Use an approved trailer to transport the machine. Activate the parking brake, and secure the machine using approved fasteners, such as tension belts, chains or ropes when transporting.

•Check and observe local road traffic regulations before transporting or driving the machine on roads.

English – 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Rider 15V2 Rider 15V2 AWD Contents After the first 8 hours Service journalPre-delivery service Towing IntroductionDear Customer Driving and transport on public roadsSerial Number Good serviceSymbols KEY to SymbolsKEY to Symbols General use Safety InstructionsSafety instructions Insure your RiderThis is what you do Driving on slopesChildren MaintenanceTransport Location of the controls What is WHAT?Presentation Seat Cutting height adjustment leverExercise care and refuel outdoors see safety instructions Lifting lever for the cutting unitStart the engine DrivingBefore starting Remove the cables in the reverse order Starting the engine with a weak batteryConnecting the jump leads Driving the RiderOther objects which can be thrown out by the blades Cutting tipsStop the engine Release lever Rider Release leverRelease lever Rider 15V2 AWD Maintenance schedule MaintenanceRemoving of the machine hoods CleaningChecking and adjusting the steering wires Can result in reduced braking ability Adjusting the parking brake RiderAdjusting the parking brake Rider 15V2 AWD Checking and adjusting of throttle wireCool before starting to replace the air filter Checking and adjusting the choke wireReplacement of fuel filter Replacing the air filterReplacing the spark plug Check the level of the battery acidChecking the fuel pump’s air filter Ignition systemCheck the safety system Checking the engine’s cooling air intake When the engine is running. Mind your fingersMain fuse Checking the tyre pressureTrapping your hand Removing the cutting unitReplacing the cutting unit belts Adjusting the parallelism of the cutting unitChecking the cutting unit’s parallelism Placing in the service position Service position for the cutting unitRemoving the BioClip plug Restoring from service positionChecking the blades Replacing the engine oil LubricationChecking the engine’s oil level Changing the oil filterGeneral lubrication Lubricating the belt adjusterChecking the transmission oil level Problem Procedure Troubleshooting scheduleGuard ServiceStorage Winter storageTechnical data EC-declaration of conformity Applies to Europe only 1150312-26 ´z+R?6¶6@¨ ´z+R?6¶6@¨

15V2 AWD specifications

The Husqvarna 15V2 AWD is a remarkable addition to the world of outdoor power equipment, especially designed for homeowners seeking a reliable and efficient lawn care solution. This versatile lawn mower combines robust performance with advanced technology, making yard maintenance a breeze.

One of the standout features of the Husqvarna 15V2 AWD is its all-wheel drive (AWD) system. This technology allows the mower to maintain superior traction across various terrains, ensuring optimal performance on slopes, uneven ground, and wet grass conditions. With AWD, users can navigate their lawns with ease, providing a consistent cut without the worry of slipping or losing control.

The Husqvarna 15V2 AWD is powered by a reliable engine, inherited from the brand's legacy of quality and durability. The engine is designed for efficient fuel consumption and powerful performance, allowing users to complete their mowing tasks in less time without sacrificing cutting quality. The mower's cutting deck features a durable construction that can withstand the rigors of regular use, while also providing an adjustable cutting height to tailor the lawn appearance to the user’s preference.

Ergonomically designed, the Husqvarna 15V2 AWD features an adjustable handle, providing comfort during operation. This feature, combined with its lightweight design, reduces fatigue, allowing for extended mowing sessions without discomfort. The user-friendly controls are intuitively placed for easy access, making it suitable for both novice and experienced users alike.

Another impressive characteristic of the 15V2 AWD is its ability to assimilate innovative technology for a better mowing experience. The mower is equipped with a cutting system that ensures a clean, precise cut, while mulching capabilities allow for efficient grass recycling, promoting a healthier lawn. Additionally, Husqvarna's commitment to eco-friendliness is evident in the mower's low emissions, aligning with modern environmental standards.

In summary, the Husqvarna 15V2 AWD is more than just a lawn mower; it’s a comprehensive lawn care solution that combines advanced technology, extensive features, and user-centric design. With its powerful engine, all-wheel drive capability, and ergonomic design, it stands as a reliable choice for homeowners looking to maintain their lawns with ease and precision. Whether you’re managing a small yard or tackling more extensive landscaping tasks, the 15V2 AWD is engineered to deliver exceptional results every time.
Top Page Image Contents