Husqvarna 15V2 AWD manual Checking the fuel pump’s air filter, Check the level of the battery acid

Page 23

Maintenance

6If the paper filter is still dirty it should be replaced with a new one.

Always replace the paper filter every 200 hours.

7Put the pre-filter and paper filter back into the air filter unit.

8Put back the air filter unit by first aligning the hooks on the bottom of the unit, then press it until the catches lock into position.

Checking the fuel pump’s air filter

Check regularly that the fuel pump’s air filter is free from dirt. The filter can when necessary be cleaned with a brush.

•Remove the screws and open the pump, no hoses need be removed.

•Replace the pump on the console.

Check the level of the battery acid

Check that the level of the battery acid lies between the markings. Top up the cells with distilled water only.

WARNING! Procedures on contact with acid

!

External: Rinse well with plenty of water.

Internal: Drink large quantities of water or milk. Contact a doctor as soon as possible.

Eyes: Rinse well with plenty of water.

Contact a doctor as soon as possible.

Batteries emit explosive gas. Sparks, flames and cigarettes must absolutely not be brought into the vicinity of the battery.

Ignition system

The engine is equipped with an electronic ignition system. Only the spark plug requires maintenance.

For recommended spark plug, see Technical data.

IMPORTANT INFORMATION

Fitting the wrong spark plug type can damage the engine.

Replacing the spark plug

1Remove the ignition cable shoe and clean around the spark plug.

2Remove the spark plug with a 3/4” (19 mm) spark plug socket wrench.

3Check the spark plug. Replace the spark plug if the electrodes are burned or if the insulation is cracked or damaged. Clean the spark plug with a steel brush if it is to be reused.

4Measure the electrode gap with a gapping tool. The gap should be 0.75 mm/0.030”. Adjust as necessary by bending the side electrode.

5Reinsert the spark plug, turning by hand to avoid damaging the threads.

6Tighten the spark plug, once it touches the seating, with the spark plug spanner. Tighten the spark plug so that the washer is compressed. A used spark plug should be turned 1/8 of a turn from the seated position. A new spark plug should be turned a 1/4 turn from the seated position.

7Replace the ignition cable shoe.

IMPORTANT INFORMATION

Inadequately tightened spark plugs can cause overheating and damage the engine. Tightening the spark plug too much can damage the threads in the cylinder head.

English – 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Rider 15V2 Rider 15V2 AWD Contents After the first 8 hours Service journalPre-delivery service Towing IntroductionDear Customer Driving and transport on public roadsSerial Number Good serviceSymbols KEY to SymbolsKEY to Symbols General use Safety InstructionsSafety instructions Insure your RiderThis is what you do Driving on slopesChildren MaintenanceTransport Location of the controls What is WHAT?Presentation Seat Cutting height adjustment leverExercise care and refuel outdoors see safety instructions Lifting lever for the cutting unitStart the engine DrivingBefore starting Remove the cables in the reverse order Starting the engine with a weak batteryConnecting the jump leads Driving the RiderOther objects which can be thrown out by the blades Cutting tipsStop the engine Release lever Rider Release leverRelease lever Rider 15V2 AWD Maintenance schedule MaintenanceRemoving of the machine hoods CleaningChecking and adjusting the steering wires Can result in reduced braking ability Adjusting the parking brake RiderAdjusting the parking brake Rider 15V2 AWD Checking and adjusting of throttle wireCool before starting to replace the air filter Checking and adjusting the choke wireReplacement of fuel filter Replacing the air filterReplacing the spark plug Check the level of the battery acidChecking the fuel pump’s air filter Ignition systemCheck the safety system Checking the engine’s cooling air intake When the engine is running. Mind your fingersMain fuse Checking the tyre pressureTrapping your hand Removing the cutting unitReplacing the cutting unit belts Adjusting the parallelism of the cutting unitChecking the cutting unit’s parallelism Placing in the service position Service position for the cutting unitRemoving the BioClip plug Restoring from service positionChecking the blades Replacing the engine oil LubricationChecking the engine’s oil level Changing the oil filterGeneral lubrication Lubricating the belt adjusterChecking the transmission oil level Problem Procedure Troubleshooting scheduleGuard ServiceStorage Winter storageTechnical data EC-declaration of conformity Applies to Europe only 1150312-26 ´z+R?6¶6@¨ ´z+R?6¶6@¨

15V2 AWD specifications

The Husqvarna 15V2 AWD is a remarkable addition to the world of outdoor power equipment, especially designed for homeowners seeking a reliable and efficient lawn care solution. This versatile lawn mower combines robust performance with advanced technology, making yard maintenance a breeze.

One of the standout features of the Husqvarna 15V2 AWD is its all-wheel drive (AWD) system. This technology allows the mower to maintain superior traction across various terrains, ensuring optimal performance on slopes, uneven ground, and wet grass conditions. With AWD, users can navigate their lawns with ease, providing a consistent cut without the worry of slipping or losing control.

The Husqvarna 15V2 AWD is powered by a reliable engine, inherited from the brand's legacy of quality and durability. The engine is designed for efficient fuel consumption and powerful performance, allowing users to complete their mowing tasks in less time without sacrificing cutting quality. The mower's cutting deck features a durable construction that can withstand the rigors of regular use, while also providing an adjustable cutting height to tailor the lawn appearance to the user’s preference.

Ergonomically designed, the Husqvarna 15V2 AWD features an adjustable handle, providing comfort during operation. This feature, combined with its lightweight design, reduces fatigue, allowing for extended mowing sessions without discomfort. The user-friendly controls are intuitively placed for easy access, making it suitable for both novice and experienced users alike.

Another impressive characteristic of the 15V2 AWD is its ability to assimilate innovative technology for a better mowing experience. The mower is equipped with a cutting system that ensures a clean, precise cut, while mulching capabilities allow for efficient grass recycling, promoting a healthier lawn. Additionally, Husqvarna's commitment to eco-friendliness is evident in the mower's low emissions, aligning with modern environmental standards.

In summary, the Husqvarna 15V2 AWD is more than just a lawn mower; it’s a comprehensive lawn care solution that combines advanced technology, extensive features, and user-centric design. With its powerful engine, all-wheel drive capability, and ergonomic design, it stands as a reliable choice for homeowners looking to maintain their lawns with ease and precision. Whether you’re managing a small yard or tackling more extensive landscaping tasks, the 15V2 AWD is engineered to deliver exceptional results every time.
Top Page Image Contents