Husqvarna 15V2 AWD manual Safety Instructions, Safety instructions, Insure your Rider, General use

Page 8

SAFETY INSTRUCTIONS

Safety instructions

These instructions are for your safety. Read them carefully.

Insure your Rider

•Check the insurance coverage for your new Rider.

•Contact your insurance company.

•You should have fully comprehensive insurance including: third party, fire, damage, theft and liability

General use

•Read all the instructions in this operator’s manual and on the machine before you start it. Ensure you understand them and then observe them.

WARNING! The ignition system of this

!machine produces an electromagnetic field during operation. This field may under some circumstances interfere with pacemakers.To reduce the risk of serious or fatal injury, we recommend persons with pacemakers to consult their physician and the pacemaker manufacturer before operating this machine.

•Learn how to use the machine and its controls safely and learn to how to stop quickly. Also learn to recognize the safety decals.

•Only allow the machine to be used by adults who are familiar with its use.

•Make sure nobody else is in the vicinity of the machine when you start the engine, engage the drive or drive off.

•Clear the area of objects such as stones, toys, wires, etc. that may become caught in the blades and be thrown out.

•Stop the engine and prevent the engine from being started until you have cleaned the outlet channel.

•Look out for the ejector and do not direct it towards anyone.

•Stop the engine and prevent it from starting before you clean the cutting unit.

•Remember that the driver is responsible for dangers or accidents.

•Never carry passengers. The machine is only intended to be used by one person.

•Always look downwards and backwards before and while reversing. Keep watch for both large and small obstacles.

•Slow before cornering.

•Switch off the blades when you are not mowing.

•Take care when rounding a fixed object, so that the blades do not hit it. Never run the machine over foreign objects.

WARNING! This machine can sever hands

!and feet as well as throw objects. Failure to observe the safety instructions can result in serious injuries.

WARNING! Engine exhaust, some of its

!constituents and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects or other reproductive impairment. The engine emits carbon monoxide, which is a colourless, poisonous gas. Do not use the machine in enclosed spaces.

•Only use the machine in daylight or in other well-lit conditions. Keep the machine at a safe distance from holes or other irregularities in the ground. Pay attention to other possible risks.

•Never use the machine if you are tired, if you have consumed alcohol, or if you are taking other drugs or medication that can affect your vision, judgement or co- ordination.

•Keep an eye on the traffic when working close to a road or when crossing it.

•Never leave the machine unsupervised with the engine running. Always stop the blades, apply the parking brake, stop the engine and remove the keys before leaving the machine.

8 – English

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Rider 15V2 Rider 15V2 AWD Contents After the first 8 hours Service journalPre-delivery service Introduction Dear CustomerDriving and transport on public roads TowingGood service Serial NumberKEY to Symbols SymbolsKEY to Symbols Safety Instructions Safety instructionsInsure your Rider General useDriving on slopes This is what you doMaintenance ChildrenTransport What is WHAT? Location of the controlsPresentation Cutting height adjustment lever Exercise care and refuel outdoors see safety instructionsLifting lever for the cutting unit SeatStart the engine DrivingBefore starting Starting the engine with a weak battery Connecting the jump leadsDriving the Rider Remove the cables in the reverse orderOther objects which can be thrown out by the blades Cutting tipsStop the engine Release lever Rider Release leverRelease lever Rider 15V2 AWD Maintenance Maintenance scheduleRemoving of the machine hoods CleaningChecking and adjusting the steering wires Adjusting the parking brake Rider Adjusting the parking brake Rider 15V2 AWDChecking and adjusting of throttle wire Can result in reduced braking abilityChecking and adjusting the choke wire Replacement of fuel filterReplacing the air filter Cool before starting to replace the air filterCheck the level of the battery acid Checking the fuel pump’s air filterIgnition system Replacing the spark plugCheck the safety system When the engine is running. Mind your fingers Main fuseChecking the tyre pressure Checking the engine’s cooling air intakeRemoving the cutting unit Trapping your handReplacing the cutting unit belts Adjusting the parallelism of the cutting unitChecking the cutting unit’s parallelism Service position for the cutting unit Placing in the service positionRemoving the BioClip plug Restoring from service positionChecking the blades Lubrication Checking the engine’s oil levelChanging the oil filter Replacing the engine oilGeneral lubrication Lubricating the belt adjusterChecking the transmission oil level Troubleshooting schedule Problem ProcedureService StorageWinter storage GuardTechnical data EC-declaration of conformity Applies to Europe only 1150312-26 ´z+R?6¶6@¨ ´z+R?6¶6@¨

15V2 AWD specifications

The Husqvarna 15V2 AWD is a remarkable addition to the world of outdoor power equipment, especially designed for homeowners seeking a reliable and efficient lawn care solution. This versatile lawn mower combines robust performance with advanced technology, making yard maintenance a breeze.

One of the standout features of the Husqvarna 15V2 AWD is its all-wheel drive (AWD) system. This technology allows the mower to maintain superior traction across various terrains, ensuring optimal performance on slopes, uneven ground, and wet grass conditions. With AWD, users can navigate their lawns with ease, providing a consistent cut without the worry of slipping or losing control.

The Husqvarna 15V2 AWD is powered by a reliable engine, inherited from the brand's legacy of quality and durability. The engine is designed for efficient fuel consumption and powerful performance, allowing users to complete their mowing tasks in less time without sacrificing cutting quality. The mower's cutting deck features a durable construction that can withstand the rigors of regular use, while also providing an adjustable cutting height to tailor the lawn appearance to the user’s preference.

Ergonomically designed, the Husqvarna 15V2 AWD features an adjustable handle, providing comfort during operation. This feature, combined with its lightweight design, reduces fatigue, allowing for extended mowing sessions without discomfort. The user-friendly controls are intuitively placed for easy access, making it suitable for both novice and experienced users alike.

Another impressive characteristic of the 15V2 AWD is its ability to assimilate innovative technology for a better mowing experience. The mower is equipped with a cutting system that ensures a clean, precise cut, while mulching capabilities allow for efficient grass recycling, promoting a healthier lawn. Additionally, Husqvarna's commitment to eco-friendliness is evident in the mower's low emissions, aligning with modern environmental standards.

In summary, the Husqvarna 15V2 AWD is more than just a lawn mower; it’s a comprehensive lawn care solution that combines advanced technology, extensive features, and user-centric design. With its powerful engine, all-wheel drive capability, and ergonomic design, it stands as a reliable choice for homeowners looking to maintain their lawns with ease and precision. Whether you’re managing a small yard or tackling more extensive landscaping tasks, the 15V2 AWD is engineered to deliver exceptional results every time.
Top Page Image Contents