Husqvarna 11 Bio/13 H Bio manual Cutting tips

Page 16

DRIVING

3.Select the required cutting height (1-9) with the cutting height lever.

To obtain a uniform cutting height it is important that the tyre pressures are equal on both front wheels (60 kPa).

4.Push in the lock button on the lift lever and lower down the cutting unit.

IMPORTANT INFORMATION

The service-life of the drive belts increases considerably if the engine is run at low speed when engaging the blades. For this reason do not increase the throttle until the cutting unit has been lowered to the cutting position.

Cutting tips

•Localise and mark stones and other fixed objects to avoid collision.

•Start with a high cutting height and reduce down until the required cutting result are obtained.

•The cutting results are best with a high engine speed (fast rotating blades) and low driving speed (slow moving machine). If the grass is not too high and thick the driving speed can be increased or the engine speed reduced without noticeably affecting the mowing results.

•The best lawns are achieved if the grass is cut often. Mowing becomes more uniform and the grass cuttings become more evenly distributed over the surface. The total time consumption is not greater since it is possible to select a higher driving speed without inferior mowing results.

•Avoid mowing a wet lawn. The mowing results are inferior since the wheels sink down into the soft lawn.

•Hose down the cutting unit with water underneath each time it is used. Put the cutting unit in the service position first.

•If you use the BioClip unit it is important to mow the grass regularly.

! WARNING!

Clear the lawn from stones and other object which can be thrown out by the blades.

Mowing pattern

English – 15

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Rider 11/13 H Rider 11 Bio/13 H Bio 101 91Contents Explanation of Symbols Safety Instructions General useDriving on slopes Do as followsMaintenance ChildrenBattery can explode and cause severe injuries Presentation PresentationLocation of the controls Presentation Rider 11 / 11 BIO Throttle and Choke leverClutch pedal Brake pedal / Parking brakeSpeed limiter Presentation Rider 13 H / 13 H BIOParking brake Lift lever for cutting unit Cutting unitRider 11 Bio and Rider 13 H Bio have a twin-blade Seat Lever for adjustment of cutting heightFuelling Before starting DrivingStarting the engine Cold engine Warm engineFor Rider 13 H and Rider 13 H Bio Driving the machineFor Rider 11 and Rider 11 Bio Cutting tips Stopping the engine Hill start, manual gearboxRelease lever Rider 13 H and Rider 13 H Bio Maintenance Maintenance scheduleDaily Maintenance interval Hours 100Dismantling of the machine hoods Engine hoodFront hood Rider 11 and Rider 13 H Front hood Rider 11 Bio and Rider 13 H BioRight-hand fender Left-hand fenderCheck the engine’s cooling air intake Check the engine’s oil levelChecking of the fuel pump’s air filter Checking and adjustment of the steering wires Poorly adjusted brakes can result in reduced braking power Adjusting the brake Rider 11 and Rider 11 BioChecking the brake Rider 11 and Rider 11 Bio Check the safety system Check the level of the battery acidProcedures on contact with acid Do not use compressed air to clean the paper filter Replacing the air filterChecking the cutting unit’s parallelism Adjustment of the cutting unit’s parallelism Service position for BioClip Maintenance Rider 11/11 BIOPlacing in service position Maintenance Rider 11/11 BIO Restoring from service position Checking the blades Checking the tyre pressureLubrication Rider 11 and Rider 11 Bio Changing the oilLubrication of front wheel bearings Lubrication of belt tensioner General lubricationChecking and adjustment of the throttle wire Replacement of the fuel filterTrouble Shooting Schedule Problem ProcedureStorage ServiceWinter storage Technical Data Dimensions Rider 11 Bio Rider 13 H Bio EU declaration of conformity Only applies to Europe Svenska ´*3,¶6X¨ Svenska 2000W37

11 Bio/13 H Bio specifications

Husqvarna 11 Bio and Husqvarna 13 H Bio represent the pinnacle of innovation in the world of robotic lawn mowers. Designed for efficiency and ease of use, these models are engineered to cater to the needs of diverse lawn sizes and terrains.

The Husqvarna 11 Bio is particularly tailored for small to medium-sized gardens, handling areas up to 600 square meters with minimal intervention. Its compact design allows for seamless navigation through narrow spaces, effortlessly maneuvering around flower beds and pathways. The mowing height can be easily adjusted, ensuring a perfectly trimmed lawn while allowing for customization based on grass types and environmental conditions.

On the other hand, the Husqvarna 13 H Bio is designed for larger areas, accommodating lawns of up to 1,000 square meters. This model incorporates advanced features that make it a standout choice for homeowners with expansive green spaces. It features a robust cutting system that ensures efficient and even grass cutting, delivering a well-manicured appearance.

One of the key technologies found in both models is the Automower® Connect, which allows users to control their mower via a smartphone app. This feature enables homeowners to start, stop, and schedule mowing sessions from anywhere, offering convenience and flexibility. In addition, the models are equipped with smart sensors that detect obstacles and navigate around them, preventing any damage to the mower or surrounding plants.

Battery life is another critical aspect of the Husqvarna 11 Bio and 13 H Bio. Both mowers are built with powerful lithium-ion batteries, providing extended operating times and quick charging capabilities. This means minimal downtime and uninterrupted mowing, even during the peak growing season.

Moreover, these robotic mowers utilize a unique GPS-assisted navigation system, allowing them to create a map of the mowing area. This ensures that every inch of the lawn is covered efficiently, eliminating the need for repetitive mowing or missed spots.

With their eco-friendly lithium-ion batteries, the Husqvarna 11 Bio and 13 H Bio are not only effective but also sustainable, producing zero direct emissions during operation. Their quiet operation allows for mowing during the day or night without disturbing the household or neighbors.

In summary, the Husqvarna 11 Bio and 13 H Bio robotic mowers embody efficiency, convenience, and sustainability, making them ideal choices for modern homeowners seeking a low-maintenance solution to lawn care. Their advanced technologies and robust features ensure a beautifully maintained lawn with minimal effort.
Top Page Image Contents