Husqvarna 11 Bio/13 H Bio manual Maintenance schedule, Daily Maintenance interval Hours, 100

Page 18

MAINTENANCE

Maintenance schedule

The following is a list of the maintenance which should be conducted on the machine. For the items which are not described in these instructions go to an authorised service workshop.

 

 

Daily

Maintenance interval

Maintenance

Page

mainte-

 

in hours

 

nance

25

50

100

 

 

before start

 

 

 

 

 

 

Check the engine’s oil level

20

●

 

 

 

Check the engine’s cooling air inlet

20

●

 

 

 

Check the fuel pump’s air filter

20

●

 

 

 

Check the steering wires

21

●

 

 

 

Check the brakes

22

●

 

 

 

Check the battery

23

●

 

 

 

Check the safety system

23

●

 

 

 

Check screws and nuts

–

❍

 

 

 

Check for fuel and oil leakage

–

❍

 

 

 

Clean the air filter’s pre-filter (foam plastic) 2)

24

 

●

 

 

Check the cutting unit

25

 

●

 

 

Check the tyre pressures (60 kPa)

30

 

●

 

 

Change the engine oil 1)

31

 

●

 

 

Adjust the brakes – Rider 11 and Rider 11 Bio

22

 

●

 

 

Check the V-belts

–

 

❍

 

 

Check the transmission’s cooling flanges –

–

 

❍

 

 

Rider 13 H and Rider 13 H Bio

 

 

 

 

 

Check the transmission’s oil level

23

 

 

●

 

Adjust the brakes – Rider 13 H and Rider 13 H Bio

22

 

 

●

 

Lubricate joints and shafts 3)

31

 

 

●

 

Check and adjust the throttle wire

33

 

 

●

 

Clean the cooling flanges on the engine and

–

 

 

❍

 

transmission 2,4)

 

 

 

 

 

Replace the air filter’s pre-filter and paper filter 2)

24

 

 

 

●

Replace the fuel filter

33

 

 

 

●

Replace the plug

–

 

 

 

❍

 

 

 

 

 

 

1)First change after 5 hours. 2) During dusty conditions cleaning and replacement should be more frequent. 3) For daily use of the machine lubrication should be conducted twice a week. 4) Conducted by authorised service workshop.

●= Described in these instructions.

❍= Not described in these instructions.

!WARNING!No service procedures must be conducted on the engine or cutting unit unless:

•

The engine is switched off.

•

The parking brake is applied.

•

The ignition key is removed.

•

The cutting unit is disengaged.

•The ignition cable is removed from the plug.

English – 17

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Rider 11/13 H Rider 11 Bio/13 H Bio 101 91Contents Explanation of Symbols Safety Instructions General useDriving on slopes Do as followsMaintenance ChildrenBattery can explode and cause severe injuries Presentation PresentationLocation of the controls Clutch pedal Presentation Rider 11 / 11 BIOThrottle and Choke lever Brake pedal / Parking brakePresentation Rider 13 H / 13 H BIO Speed limiterParking brake Cutting unit Lift lever for cutting unitRider 11 Bio and Rider 13 H Bio have a twin-blade Lever for adjustment of cutting height SeatFuelling Driving Before startingStarting the engine Cold engine Warm engineDriving the machine For Rider 13 H and Rider 13 H BioFor Rider 11 and Rider 11 Bio Cutting tips Hill start, manual gearbox Stopping the engineRelease lever Rider 13 H and Rider 13 H Bio Daily Maintenance interval Hours MaintenanceMaintenance schedule 100Front hood Rider 11 and Rider 13 H Dismantling of the machine hoodsEngine hood Front hood Rider 11 Bio and Rider 13 H BioRight-hand fender Left-hand fenderCheck the engine’s oil level Check the engine’s cooling air intakeChecking of the fuel pump’s air filter Checking and adjustment of the steering wires Adjusting the brake Rider 11 and Rider 11 Bio Poorly adjusted brakes can result in reduced braking powerChecking the brake Rider 11 and Rider 11 Bio Check the level of the battery acid Check the safety systemProcedures on contact with acid Do not use compressed air to clean the paper filter Replacing the air filterChecking the cutting unit’s parallelism Adjustment of the cutting unit’s parallelism Maintenance Rider 11/11 BIO Service position for BioClipPlacing in service position Maintenance Rider 11/11 BIO Restoring from service position Checking the blades Checking the tyre pressureChanging the oil Lubrication Rider 11 and Rider 11 BioLubrication of front wheel bearings Lubrication of belt tensioner General lubricationChecking and adjustment of the throttle wire Replacement of the fuel filterTrouble Shooting Schedule Problem ProcedureService StorageWinter storage Technical Data Dimensions Rider 11 Bio Rider 13 H Bio EU declaration of conformity Only applies to Europe Svenska ´*3,¶6X¨ Svenska 2000W37

11 Bio/13 H Bio specifications

Husqvarna 11 Bio and Husqvarna 13 H Bio represent the pinnacle of innovation in the world of robotic lawn mowers. Designed for efficiency and ease of use, these models are engineered to cater to the needs of diverse lawn sizes and terrains.

The Husqvarna 11 Bio is particularly tailored for small to medium-sized gardens, handling areas up to 600 square meters with minimal intervention. Its compact design allows for seamless navigation through narrow spaces, effortlessly maneuvering around flower beds and pathways. The mowing height can be easily adjusted, ensuring a perfectly trimmed lawn while allowing for customization based on grass types and environmental conditions.

On the other hand, the Husqvarna 13 H Bio is designed for larger areas, accommodating lawns of up to 1,000 square meters. This model incorporates advanced features that make it a standout choice for homeowners with expansive green spaces. It features a robust cutting system that ensures efficient and even grass cutting, delivering a well-manicured appearance.

One of the key technologies found in both models is the Automower® Connect, which allows users to control their mower via a smartphone app. This feature enables homeowners to start, stop, and schedule mowing sessions from anywhere, offering convenience and flexibility. In addition, the models are equipped with smart sensors that detect obstacles and navigate around them, preventing any damage to the mower or surrounding plants.

Battery life is another critical aspect of the Husqvarna 11 Bio and 13 H Bio. Both mowers are built with powerful lithium-ion batteries, providing extended operating times and quick charging capabilities. This means minimal downtime and uninterrupted mowing, even during the peak growing season.

Moreover, these robotic mowers utilize a unique GPS-assisted navigation system, allowing them to create a map of the mowing area. This ensures that every inch of the lawn is covered efficiently, eliminating the need for repetitive mowing or missed spots.

With their eco-friendly lithium-ion batteries, the Husqvarna 11 Bio and 13 H Bio are not only effective but also sustainable, producing zero direct emissions during operation. Their quiet operation allows for mowing during the day or night without disturbing the household or neighbors.

In summary, the Husqvarna 11 Bio and 13 H Bio robotic mowers embody efficiency, convenience, and sustainability, making them ideal choices for modern homeowners seeking a low-maintenance solution to lawn care. Their advanced technologies and robust features ensure a beautifully maintained lawn with minimal effort.
Top Page Image Contents