Husqvarna 11 Bio/13 H Bio manual Changing the oil, Lubrication Rider 11 and Rider 11 Bio

Page 32

MAINTENANCE

Changing the oil

The oil should be changed for the first time after 5 hours of running time. Thereafter it should be changed every 25 hours of running time.

!WARNING!

Engine oil can be very hot if it is drained off directly after the engine is stopped. Therefore allow the engine to cool down first.

1.Place a receptacle under the engine’s drain plug, located on the left-hand side of the engine.

2.Remove the dip stick and drain plug.

3.Let the oil run out into the receptacle.

4.Fit the drain plug and tighten.

5.Fill up with oil to the “FULL” mark on the dip stick. The oil is filled in the same hole for the dip stick.

Use engine oil SAE 30 or SAE 10W/30, class SF-CC.

Use engine oil with min. API SF quality and SAE 30 or SAE 10W/30 viscosity grade. The oil volume in the engine is 1.4 litres.

6.Run the engine warm and then check that there is no leakage from the drain plug.

Lubrication Rider 11 and Rider 11 Bio

All joints and bearings are lubricated on manufac- ture with molybdenum sulphide grease. Re-grease with same type of grease. Lubricate the steering and control wires with engine oil.

The machine should be lubricated regularly, and when it is used daily twice a week.

Lubrication of front wheel bearings

On Riders with rear ejection the hood and wings must be removed so that the bar can be raised to allow removal of the wheel.

1.Remove the plastic cover on the hub.

2.Remove the lock-ring and washer on the front wheel axle.

3.Lift off the wheel.

4.Grease the axle journal with molybdenum sulphide grease.

5.Assemble the parts in the reverse order.

IMPORTANT INFORMATION

Check that the lock-ring is correctly posi- tioned in the slot.

 

ADD

FULL

ADD

FULL

 

IMPORTANT INFORMATION

Used engine oil is hazardous to health and environment and must in accordance with the law not be poured out on the ground or in the nature, and must be handed in to a workshop or other designated station for treatment. Avoid skin contact, wash with soap and water in the event of spillage.

English – 31

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Rider 11/13 H Rider 11 Bio/13 H Bio 101 91Contents Explanation of Symbols Safety Instructions General useDriving on slopes Do as followsMaintenance ChildrenBattery can explode and cause severe injuries Location of the controls PresentationPresentation Presentation Rider 11 / 11 BIO Throttle and Choke leverClutch pedal Brake pedal / Parking brakeParking brake Presentation Rider 13 H / 13 H BIOSpeed limiter Rider 11 Bio and Rider 13 H Bio have a twin-blade Cutting unitLift lever for cutting unit Fuelling Lever for adjustment of cutting heightSeat Starting the engine DrivingBefore starting Cold engine Warm engineFor Rider 11 and Rider 11 Bio Driving the machineFor Rider 13 H and Rider 13 H Bio Cutting tips Release lever Rider 13 H and Rider 13 H Bio Hill start, manual gearboxStopping the engine Maintenance Maintenance scheduleDaily Maintenance interval Hours 100Dismantling of the machine hoods Engine hoodFront hood Rider 11 and Rider 13 H Front hood Rider 11 Bio and Rider 13 H BioRight-hand fender Left-hand fenderChecking of the fuel pump’s air filter Check the engine’s oil levelCheck the engine’s cooling air intake Checking and adjustment of the steering wires Checking the brake Rider 11 and Rider 11 Bio Adjusting the brake Rider 11 and Rider 11 BioPoorly adjusted brakes can result in reduced braking power Procedures on contact with acid Check the level of the battery acidCheck the safety system Do not use compressed air to clean the paper filter Replacing the air filterChecking the cutting unit’s parallelism Adjustment of the cutting unit’s parallelism Placing in service position Maintenance Rider 11/11 BIOService position for BioClip Maintenance Rider 11/11 BIO Restoring from service position Checking the blades Checking the tyre pressureLubrication of front wheel bearings Changing the oilLubrication Rider 11 and Rider 11 Bio Lubrication of belt tensioner General lubricationChecking and adjustment of the throttle wire Replacement of the fuel filterTrouble Shooting Schedule Problem ProcedureWinter storage ServiceStorage Technical Data Dimensions Rider 11 Bio Rider 13 H Bio EU declaration of conformity Only applies to Europe Svenska ´*3,¶6X¨ Svenska 2000W37

11 Bio/13 H Bio specifications

Husqvarna 11 Bio and Husqvarna 13 H Bio represent the pinnacle of innovation in the world of robotic lawn mowers. Designed for efficiency and ease of use, these models are engineered to cater to the needs of diverse lawn sizes and terrains.

The Husqvarna 11 Bio is particularly tailored for small to medium-sized gardens, handling areas up to 600 square meters with minimal intervention. Its compact design allows for seamless navigation through narrow spaces, effortlessly maneuvering around flower beds and pathways. The mowing height can be easily adjusted, ensuring a perfectly trimmed lawn while allowing for customization based on grass types and environmental conditions.

On the other hand, the Husqvarna 13 H Bio is designed for larger areas, accommodating lawns of up to 1,000 square meters. This model incorporates advanced features that make it a standout choice for homeowners with expansive green spaces. It features a robust cutting system that ensures efficient and even grass cutting, delivering a well-manicured appearance.

One of the key technologies found in both models is the Automower® Connect, which allows users to control their mower via a smartphone app. This feature enables homeowners to start, stop, and schedule mowing sessions from anywhere, offering convenience and flexibility. In addition, the models are equipped with smart sensors that detect obstacles and navigate around them, preventing any damage to the mower or surrounding plants.

Battery life is another critical aspect of the Husqvarna 11 Bio and 13 H Bio. Both mowers are built with powerful lithium-ion batteries, providing extended operating times and quick charging capabilities. This means minimal downtime and uninterrupted mowing, even during the peak growing season.

Moreover, these robotic mowers utilize a unique GPS-assisted navigation system, allowing them to create a map of the mowing area. This ensures that every inch of the lawn is covered efficiently, eliminating the need for repetitive mowing or missed spots.

With their eco-friendly lithium-ion batteries, the Husqvarna 11 Bio and 13 H Bio are not only effective but also sustainable, producing zero direct emissions during operation. Their quiet operation allows for mowing during the day or night without disturbing the household or neighbors.

In summary, the Husqvarna 11 Bio and 13 H Bio robotic mowers embody efficiency, convenience, and sustainability, making them ideal choices for modern homeowners seeking a low-maintenance solution to lawn care. Their advanced technologies and robust features ensure a beautifully maintained lawn with minimal effort.
Top Page Image Contents