Husqvarna 11 Bio/13 H Bio Check the engine’s oil level, Check the engine’s cooling air intake

Page 21

MAINTENANCE

Check the engine’s oil level

Check the oil level in the engine when the machine is horizontal.

Raise the engine cover as described on page 18.

Release the dip stick and pull out. Wipe off the oil and insert again.

The dip stick must be fully screwed down.

Now release the dip stick again and pull out. Check the oil level.

The oil level should lie between the markings on dip stick. If the level approaches the “ADD” mark, top up with oil to the “FULL” mark.

The oil is filled in the same hole for the dip stick

Use engine oil SAE 30 or SAE 10W/30, class SF-CC.

The total oil volume in the engine is 1.4 litres.

Check the engine’s cooling air intake

Raise the engine cover as described on page 18.

Check that the cooling intake is free from leaves, grass and dirt.

If the cooling intake is blocked this will interfere with the cooling of the engine, which can damage the engine.

 

ADD

FULL

ADD

FULL

 

Checking of the fuel pump’s air filter

Check regularly that the fuel pump’s air filter is free from dirt.

The filter can when necessary be cleaned with a brush.

20 – English

Image 21
Contents 101 91 Rider 11/13 H Rider 11 Bio/13 H BioContents Explanation of Symbols General use Safety InstructionsDo as follows Driving on slopesChildren MaintenanceBattery can explode and cause severe injuries Presentation PresentationLocation of the controls Throttle and Choke lever Presentation Rider 11 / 11 BIOClutch pedal Brake pedal / Parking brakePresentation Rider 13 H / 13 H BIO Speed limiterParking brake Cutting unit Lift lever for cutting unitRider 11 Bio and Rider 13 H Bio have a twin-blade Lever for adjustment of cutting height SeatFuelling Driving Before startingStarting the engine Warm engine Cold engineDriving the machine For Rider 13 H and Rider 13 H BioFor Rider 11 and Rider 11 Bio Cutting tips Hill start, manual gearbox Stopping the engineRelease lever Rider 13 H and Rider 13 H Bio Maintenance schedule MaintenanceDaily Maintenance interval Hours 100Engine hood Dismantling of the machine hoodsFront hood Rider 11 and Rider 13 H Front hood Rider 11 Bio and Rider 13 H BioLeft-hand fender Right-hand fenderCheck the engine’s oil level Check the engine’s cooling air intakeChecking of the fuel pump’s air filter Checking and adjustment of the steering wires Adjusting the brake Rider 11 and Rider 11 Bio Poorly adjusted brakes can result in reduced braking powerChecking the brake Rider 11 and Rider 11 Bio Check the level of the battery acid Check the safety systemProcedures on contact with acid Replacing the air filter Do not use compressed air to clean the paper filterChecking the cutting unit’s parallelism Adjustment of the cutting unit’s parallelism Maintenance Rider 11/11 BIO Service position for BioClipPlacing in service position Maintenance Rider 11/11 BIO Restoring from service position Checking the tyre pressure Checking the bladesChanging the oil Lubrication Rider 11 and Rider 11 BioLubrication of front wheel bearings General lubrication Lubrication of belt tensionerReplacement of the fuel filter Checking and adjustment of the throttle wireProblem Procedure Trouble Shooting ScheduleService StorageWinter storage Technical Data Dimensions Rider 11 Bio Rider 13 H Bio EU declaration of conformity Only applies to Europe Svenska ´*3,¶6X¨ Svenska 2000W37

11 Bio/13 H Bio specifications

Husqvarna 11 Bio and Husqvarna 13 H Bio represent the pinnacle of innovation in the world of robotic lawn mowers. Designed for efficiency and ease of use, these models are engineered to cater to the needs of diverse lawn sizes and terrains.

The Husqvarna 11 Bio is particularly tailored for small to medium-sized gardens, handling areas up to 600 square meters with minimal intervention. Its compact design allows for seamless navigation through narrow spaces, effortlessly maneuvering around flower beds and pathways. The mowing height can be easily adjusted, ensuring a perfectly trimmed lawn while allowing for customization based on grass types and environmental conditions.

On the other hand, the Husqvarna 13 H Bio is designed for larger areas, accommodating lawns of up to 1,000 square meters. This model incorporates advanced features that make it a standout choice for homeowners with expansive green spaces. It features a robust cutting system that ensures efficient and even grass cutting, delivering a well-manicured appearance.

One of the key technologies found in both models is the Automower® Connect, which allows users to control their mower via a smartphone app. This feature enables homeowners to start, stop, and schedule mowing sessions from anywhere, offering convenience and flexibility. In addition, the models are equipped with smart sensors that detect obstacles and navigate around them, preventing any damage to the mower or surrounding plants.

Battery life is another critical aspect of the Husqvarna 11 Bio and 13 H Bio. Both mowers are built with powerful lithium-ion batteries, providing extended operating times and quick charging capabilities. This means minimal downtime and uninterrupted mowing, even during the peak growing season.

Moreover, these robotic mowers utilize a unique GPS-assisted navigation system, allowing them to create a map of the mowing area. This ensures that every inch of the lawn is covered efficiently, eliminating the need for repetitive mowing or missed spots.

With their eco-friendly lithium-ion batteries, the Husqvarna 11 Bio and 13 H Bio are not only effective but also sustainable, producing zero direct emissions during operation. Their quiet operation allows for mowing during the day or night without disturbing the household or neighbors.

In summary, the Husqvarna 11 Bio and 13 H Bio robotic mowers embody efficiency, convenience, and sustainability, making them ideal choices for modern homeowners seeking a low-maintenance solution to lawn care. Their advanced technologies and robust features ensure a beautifully maintained lawn with minimal effort.