Husqvarna CS 2156C Maintenance schedule, Daily maintenance Weekly maintenance Monthly maintenance

Page 37

MAINTENANCE

Maintenance schedule

The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section.

Daily maintenance

Weekly maintenance

Monthly maintenance

 

 

 

 

On chain saws without a catalytic

Check the brake band on the chain

 

brake for wear. Replace when less

Clean the outside of the machine.

converter, check the cooling system

than 0.6 mm (0,024 inch) remains at

 

weekly.

 

the most worn point.

 

 

 

 

 

Check that the components of the

Check the starter, starter cord and

Check the clutch centre, clutch drum

throttle control work safely. (Throttle

return spring.

and clutch spring for wear.

lockout and throttle control.)

 

 

 

 

 

Clean the chain brake and check that

 

 

it operates safely. Make sure that the

Check that the vibration damping

Clean the spark plug. Check that the

chain catcher is undamaged, and

elements are not damaged.

electrode gap is 0.5 mm.

replace it if necessary.

 

 

 

 

 

The bar should be turned daily for

 

 

more even wear. Check the

 

 

lubrication hole in the bar, to be sure it

Lubricate the clutch drum bearing.

Clean the outside of the carburettor.

is not clogged. Clean the bar groove.

 

 

If the bar has a sprocket tip, this

 

 

should be lubricated.

 

 

 

 

 

Check that the bar and chain are

File off any burrs from the edges of

Check the fuel filter and the fuel hose.

getting sufficient oil.

the bar.

Replace if necessary.

 

 

 

Check the saw chain with regard to

 

 

visible cracks in the rivets and links,

 

 

whether the saw chain is stiff or

Clean or replace the spark arrestor

Empty the fuel tank and clean the

whether the rivets and links are

mesh on the muffler.

inside.

abnormally worn. Replace if

 

 

necessary.

 

 

 

 

 

Sharpen the chain and check its

 

 

tension and condition. Check the

Clean the carburettor compartment.

Empty the oil tank and clean the

drive sprocket for excessive wear and

inside.

 

replace if necessary.

 

 

 

 

 

Clean the starter units air intake.

Clean the air filter. Replace if

Check all cables and connections.

necessary.

 

 

 

 

 

Check that nuts and screws are tight.

 

 

 

 

 

Check that the stop switch works

 

 

correctly.

 

 

 

 

 

Check that there are no fuel leaks

 

 

from the engine, tank or fuel lines.

 

 

 

 

 

On chain saws with a catalytic

 

 

converter, check the cooling system

 

 

daily.

 

 

 

 

 

English – 37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents English Symbols on the machine KEY to SymbolsSymbols in the operator’s manual Contents Dear Customer IntroductionWhat is what on the chain saw? What is WHAT?Before using a new chain saw General Safety PrecautionsAlways use common sense Personal protective equipment Machine′s safety equipmentChain brake and front hand guard General Safety Precautions Chain catcher Throttle lockoutRight hand guard Vibration damping systemCutting equipment Stop switchMuffler General rulesBar Cutting equipment designed to reduce kickbackChain Injuries Some terms that describe the bar and chainGeneral information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingTensioning the chain Which could lead to serious, even fatal injuries Chain oil Lubricating cutting equipmentFilling with chain oil Checking chain lubricationChecking wear on cutting equipment Needle bearing lubricationFitting the bar and chain AssemblyFitting a spike bumper Working with the chainFuel Fuel HandlingFuelling Fuel safetyTransport and storage Long-term storageStarting and stopping Starting and StoppingCold engine Warm engineStopping Working Techniques Basic safety rulesBefore use General working instructionsJam. Always stop the engine before cleaning Terms Basic cutting techniqueLimbing Tree felling techniqueLog is supported at one end. There is a high risk Safe distanceClearing the trunk and preparing your retreat Felling directionDirectional cuts Felling cut Freeing a tree that has fallen badly General adviceFreeing a trapped tree Cutting trees and branches that are in tensionWhat is kickback? How to avoid kickbackCutting the trunk into logs Carburettor adjustment MaintenanceGeneral High speed jet H Correctly adjusted carburettorChecking brake band wear Checking the front hand guardChecking the inertia brake release Muffler Changing a broken or worn starter cord StarterTensioning the recoil spring Changing a broken recoil springSpark plug Air filterLubricating the bar tip sprocket Needle bearing lubricationAir Injection centrifugal cleaning Adjustment of the oil pumpRunning when making adjustments Cooling systemWinter use Temperature 0C or colderHeated handles Electrical carburettor heatingDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain filing and file gauges Bar and chain combinationsApplies to Europe only EC-declaration of conformityEN ISO 12100-22003, Cispr 122005, EN ISO Page Page Page Original instructions 1153185-26

CS 2159CWH, CS 2159C, CS 2156, CS 2156CWH, CS 2159WH specifications

The Husqvarna CS 2159, CS 2156C, CS 2159W, CS 2159WH, and CS 2156CWH are a series of powerful and efficient chainsaws designed for both professionals and experienced enthusiasts. These models are known for their reliability, cutting performance, and innovative features that enhance usability and productivity.

One of the standout features across these models is the Efficient Air Cleaning System, which significantly reduces wear and tear on the engine. This system pre-filters the air entering the engine, ensuring that only clean air is used, thereby extending the lifespan of the chainsaw and improving its performance. This feature is particularly beneficial in dusty environments, where traditional systems might struggle to maintain efficiency.

The CS 2159 and CS 2156C models include an advanced fuel pump that allows for easy starting, even in cold conditions. This innovation saves time and effort, making them ideal for users who need to get to work quickly. Additionally, these chainsaws come equipped with a low-vibration design that minimizes user fatigue during extended use, allowing for greater comfort without compromising performance.

A highlight of the CS 2159W and CS 2159WH models is their weather-resistant construction. These chainsaws are built to withstand adverse weather conditions, making them suitable for year-round use. The WH variant features a comfortable heated handle, which provides added warmth and grip in cold environments, ensuring that you can operate efficiently regardless of the external temperature.

All models in this series are equipped with a quick-release air filter, facilitating easy maintenance and serviceability. Regular maintenance is crucial for optimal performance, and Husqvarna has made it simple for users to keep their equipment in top condition. The chain tensioning system is also easily accessible, allowing for quick adjustments to be made on the fly, ensuring that users can maintain an optimal cutting experience.

In terms of power, the CS 2159 series boasts robust engines that provide high cutting performance while being environmentally friendly. The engines are designed to consume less fuel and emit fewer emissions, meeting modern environmental standards without sacrificing the power output that professionals require.

In summary, the Husqvarna CS 2159, CS 2156C, CS 2159W, CS 2159WH, and CS 2156CWH chainsaws are exceptional tools that combine advanced technology with user-friendly features. With reliable performance, low maintenance needs, and comfort-driven design, they stand out as top choices for both professional users and outdoor enthusiasts alike. Whether tackling heavy-duty cutting tasks or maintaining your property, these chainsaws are built to deliver consistent results.
Top Page Image Contents