Husqvarna CS 2156C, CS 2159WH manual Working Techniques, Before use, General working instructions

Page 21

WORKING TECHNIQUES

Before use:

,

1Check that the chain brake works correctly and is not damaged.

2Check that the rear right hand guard is not damaged.

3Check that the throttle lockout works correctly and is not damaged.

4Check that the stop switch works correctly and is not damaged.

5Check that all handles are free from oil.

6Check that the anti vibration system works and is not damaged.

7Check that the muffler is securely attached and not damaged.

8Check that all parts of the chain saw are tightened correctly and that they are not damaged or missing.

9Check that the chain catcher is in place and not damaged.

10Check the chain tension.

General working instructions

IMPORTANT!

This section describes basic safety rules for using a chain saw. This information is never a substitute for professional skills and experience. If you get into a situation where you feel unsafe, stop and seek expert advice. Contact your chain saw dealer, service agent or an experienced chain saw user. Do not attempt any task that you feel unsure of!

Before using a chain saw you must understand the effects of kickback and how to avoid them. See instructions under the heading How to avoid kickback.

Before using a chain saw you must understand the difference between cutting with the top and bottom edges of the bar. See instructions under the headings How to avoid kickback and Machine’s safety equipment.

Wear personal protective equipment. See instructions under the heading ”Personal protective equipment”.

Basic safety rules

1 Look around you:

•To ensure that people, animals or other things cannot affect your control of the machine.

•To make sure that none of the above might come within reach of your saw or be injured by falling trees.

CAUTION! Follow the instructions above, but do not use a chain saw in a situation where you cannot call for help in case of an accident.

2Do not use the machine in bad weather, such as dense fog, heavy rain, strong wind, intense cold, etc. Working in bad weather is tiring and often brings added risks, such as icy ground, unpredictable felling direction, etc.

3Take great care when removing small branches and avoid cutting bushes (i.e. cutting many small branches at the same time). Small branches can be grabbed by the chain and thrown back at you, causing serious injury.

4Make sure you can move and stand safely. Check the area around you for possible obstacles (roots, rocks, branches, ditches, etc.) in case you have to move suddenly. Take great care when working on sloping ground.

5Take great care when cutting a tree that is in tension. A tree that is in tension may spring back to its normal position before or after being cut. If you position yourself incorrectly or make the cut in the wrong place the tree may hit you or the machine and cause you to lose control. Both situations can cause serious personal injury.

6Before moving your chain saw switch off the engine and lock the chain using the chain brake. Carry the chain saw with the bar and chain pointing backwards.

English – 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents English KEY to Symbols Symbols on the machineSymbols in the operator’s manual Contents Dear Customer IntroductionWhat is what on the chain saw? What is WHAT?General Safety Precautions Before using a new chain sawAlways use common sense Machine′s safety equipment Personal protective equipmentChain brake and front hand guard General Safety Precautions Chain catcher Throttle lockoutRight hand guard Vibration damping systemCutting equipment Stop switchMuffler General rulesBar Cutting equipment designed to reduce kickbackChain Injuries Some terms that describe the bar and chainGeneral information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingTensioning the chain Which could lead to serious, even fatal injuries Chain oil Lubricating cutting equipmentFilling with chain oil Checking chain lubricationChecking wear on cutting equipment Needle bearing lubricationFitting the bar and chain AssemblyFitting a spike bumper Working with the chainFuel Fuel HandlingFuelling Fuel safetyTransport and storage Long-term storageStarting and stopping Starting and StoppingCold engine Warm engineStopping Working Techniques Basic safety rulesBefore use General working instructionsJam. Always stop the engine before cleaning Terms Basic cutting techniqueLimbing Tree felling techniqueLog is supported at one end. There is a high risk Safe distanceFelling direction Clearing the trunk and preparing your retreatDirectional cuts Felling cut Freeing a tree that has fallen badly General adviceFreeing a trapped tree Cutting trees and branches that are in tensionHow to avoid kickback What is kickback?Cutting the trunk into logs Maintenance Carburettor adjustmentGeneral High speed jet H Correctly adjusted carburettorChecking brake band wear Checking the front hand guardChecking the inertia brake release Muffler Changing a broken or worn starter cord StarterTensioning the recoil spring Changing a broken recoil springSpark plug Air filterLubricating the bar tip sprocket Needle bearing lubricationAir Injection centrifugal cleaning Adjustment of the oil pumpRunning when making adjustments Cooling systemWinter use Temperature 0C or colderHeated handles Electrical carburettor heatingDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain filing and file gauges Bar and chain combinationsEC-declaration of conformity Applies to Europe onlyEN ISO 12100-22003, Cispr 122005, EN ISO Page Page Page Original instructions 1153185-26

CS 2159CWH, CS 2159C, CS 2156, CS 2156CWH, CS 2159WH specifications

The Husqvarna CS 2159, CS 2156C, CS 2159W, CS 2159WH, and CS 2156CWH are a series of powerful and efficient chainsaws designed for both professionals and experienced enthusiasts. These models are known for their reliability, cutting performance, and innovative features that enhance usability and productivity.

One of the standout features across these models is the Efficient Air Cleaning System, which significantly reduces wear and tear on the engine. This system pre-filters the air entering the engine, ensuring that only clean air is used, thereby extending the lifespan of the chainsaw and improving its performance. This feature is particularly beneficial in dusty environments, where traditional systems might struggle to maintain efficiency.

The CS 2159 and CS 2156C models include an advanced fuel pump that allows for easy starting, even in cold conditions. This innovation saves time and effort, making them ideal for users who need to get to work quickly. Additionally, these chainsaws come equipped with a low-vibration design that minimizes user fatigue during extended use, allowing for greater comfort without compromising performance.

A highlight of the CS 2159W and CS 2159WH models is their weather-resistant construction. These chainsaws are built to withstand adverse weather conditions, making them suitable for year-round use. The WH variant features a comfortable heated handle, which provides added warmth and grip in cold environments, ensuring that you can operate efficiently regardless of the external temperature.

All models in this series are equipped with a quick-release air filter, facilitating easy maintenance and serviceability. Regular maintenance is crucial for optimal performance, and Husqvarna has made it simple for users to keep their equipment in top condition. The chain tensioning system is also easily accessible, allowing for quick adjustments to be made on the fly, ensuring that users can maintain an optimal cutting experience.

In terms of power, the CS 2159 series boasts robust engines that provide high cutting performance while being environmentally friendly. The engines are designed to consume less fuel and emit fewer emissions, meeting modern environmental standards without sacrificing the power output that professionals require.

In summary, the Husqvarna CS 2159, CS 2156C, CS 2159W, CS 2159WH, and CS 2156CWH chainsaws are exceptional tools that combine advanced technology with user-friendly features. With reliable performance, low maintenance needs, and comfort-driven design, they stand out as top choices for both professional users and outdoor enthusiasts alike. Whether tackling heavy-duty cutting tasks or maintaining your property, these chainsaws are built to deliver consistent results.
Top Page Image Contents