Husqvarna CS 2159W Lubricating cutting equipment, Filling with chain oil, Chain drive sprocket

Page 14

GENERAL SAFETY PRECAUTIONS

Lubricating cutting equipment

WARNING! Poor lubrication of cutting ! equipment may cause the chain to snap,

which could lead to serious, even fatal injuries.

Chain oil

Chain oil must demonstrate good adhesion to the chain and also maintain its flow characteristics regardless of whether it is warm summer or cold winter weather.

As a chain saw manufacturer we have developed an optimal chain oil which, with its vegetable oil base, is also biodegradable. We recommend the use of our own oil for both maximum chain life and to minimise environmental damage. If our own chain oil is not available, standard chain oil is recommended.

Never use waste oil! Using waste oil can be dangerous to you and damage the machine and environment.

IMPORTANT! When using vegetable based saw chain oil, dismantle and clean the groove in the bar and saw chain before long-term storage. Otherwise there is a risk of the saw chain oil oxidizing, which will result in the saw chain becoming stiff and the bar tip sprocket jamming.

Filling with chain oil

•All our chain saws have an automatic chain lubrication system. On some models the oil flow is also adjustable.

•The saw chain oil tank and the fuel tank are designed so that the fuel runs out before the saw chain oil.

However, this safety feature requires that you use the right sort of chain oil (if the oil is too thin it will run out before the fuel), and that you adjust the carburetor as recommended (a lean mixture may mean that the fuel lasts longer than the oil) and that you also use the recommended cutting equipment (a bar that is too long will use more chain oil).

Checking chain lubrication

•Check the chain lubrication each time you refuel. See instructions under the heading Lubricating the bar tip sprocket.

Aim the tip of the bar at a light coloured surface about 20 cm (8 inches) away. After 1 minute running at 3/4

throttle you should see a distinct line of oil on the light surface.

If the chain lubrication is not working:

•Check that the oil channel in the bar is not obstructed. Clean if necessary.

•Check that the groove in the edge of the bar is clean. Clean if necessary.

•Check that the bar tip sprocket turns freely and that the lubricating hole in the tip sprocket is not blocked. Clean and lubricate if necessary.

If the chain lubrication system is still not working after carrying out the above checks and associated measures you should contact your service agent.

Chain drive sprocket

The clutch drum is fitted with one of the following drive sprockets:

ASpur sprocket (the chain sprocket is welded on the drum)

BRim sprocket (replaceable)

14 – English

Page 13 Page 15
Image 14
Page 13 Page 15
Contents English Symbols in the operator’s manual KEY to SymbolsSymbols on the machine Contents Introduction Dear CustomerWhat is WHAT? What is what on the chain saw?Always use common sense General Safety PrecautionsBefore using a new chain saw Chain brake and front hand guard Machine′s safety equipmentPersonal protective equipment General Safety Precautions Right hand guard Throttle lockoutChain catcher Vibration damping systemMuffler Stop switchCutting equipment General rulesChain Cutting equipment designed to reduce kickbackBar Injuries Some terms that describe the bar and chainSharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethTensioning the chain Filling with chain oil Lubricating cutting equipmentWhich could lead to serious, even fatal injuries Chain oil Checking chain lubricationNeedle bearing lubrication Checking wear on cutting equipmentFitting a spike bumper AssemblyFitting the bar and chain Working with the chainFuel Handling FuelTransport and storage Fuel safetyFuelling Long-term storageCold engine Starting and StoppingStarting and stopping Warm engineStopping Before use Basic safety rulesWorking Techniques General working instructionsJam. Always stop the engine before cleaning Basic cutting technique TermsLog is supported at one end. There is a high risk Tree felling techniqueLimbing Safe distanceDirectional cuts Felling directionClearing the trunk and preparing your retreat Felling cut Freeing a trapped tree General adviceFreeing a tree that has fallen badly Cutting trees and branches that are in tensionCutting the trunk into logs How to avoid kickbackWhat is kickback? General MaintenanceCarburettor adjustment Checking brake band wear Correctly adjusted carburettorHigh speed jet H Checking the front hand guardChecking the inertia brake release Muffler Tensioning the recoil spring StarterChanging a broken or worn starter cord Changing a broken recoil springLubricating the bar tip sprocket Air filterSpark plug Needle bearing lubricationRunning when making adjustments Adjustment of the oil pumpAir Injection centrifugal cleaning Cooling systemHeated handles Temperature 0C or colderWinter use Electrical carburettor heatingMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataBar and chain combinations Saw chain filing and file gaugesEN ISO 12100-22003, Cispr 122005, EN ISO EC-declaration of conformityApplies to Europe only Page Page Page Original instructions 1153185-26

CS 2159CWH, CS 2159C, CS 2156, CS 2156CWH, CS 2159WH specifications

The Husqvarna CS 2159, CS 2156C, CS 2159W, CS 2159WH, and CS 2156CWH are a series of powerful and efficient chainsaws designed for both professionals and experienced enthusiasts. These models are known for their reliability, cutting performance, and innovative features that enhance usability and productivity.

One of the standout features across these models is the Efficient Air Cleaning System, which significantly reduces wear and tear on the engine. This system pre-filters the air entering the engine, ensuring that only clean air is used, thereby extending the lifespan of the chainsaw and improving its performance. This feature is particularly beneficial in dusty environments, where traditional systems might struggle to maintain efficiency.

The CS 2159 and CS 2156C models include an advanced fuel pump that allows for easy starting, even in cold conditions. This innovation saves time and effort, making them ideal for users who need to get to work quickly. Additionally, these chainsaws come equipped with a low-vibration design that minimizes user fatigue during extended use, allowing for greater comfort without compromising performance.

A highlight of the CS 2159W and CS 2159WH models is their weather-resistant construction. These chainsaws are built to withstand adverse weather conditions, making them suitable for year-round use. The WH variant features a comfortable heated handle, which provides added warmth and grip in cold environments, ensuring that you can operate efficiently regardless of the external temperature.

All models in this series are equipped with a quick-release air filter, facilitating easy maintenance and serviceability. Regular maintenance is crucial for optimal performance, and Husqvarna has made it simple for users to keep their equipment in top condition. The chain tensioning system is also easily accessible, allowing for quick adjustments to be made on the fly, ensuring that users can maintain an optimal cutting experience.

In terms of power, the CS 2159 series boasts robust engines that provide high cutting performance while being environmentally friendly. The engines are designed to consume less fuel and emit fewer emissions, meeting modern environmental standards without sacrificing the power output that professionals require.

In summary, the Husqvarna CS 2159, CS 2156C, CS 2159W, CS 2159WH, and CS 2156CWH chainsaws are exceptional tools that combine advanced technology with user-friendly features. With reliable performance, low maintenance needs, and comfort-driven design, they stand out as top choices for both professional users and outdoor enthusiasts alike. Whether tackling heavy-duty cutting tasks or maintaining your property, these chainsaws are built to deliver consistent results.
Top Page Image Contents