Husqvarna FC2145S, FC2145W, CC2145, BC2145 manual Fuel Handling, Fuel safety

Page 21

FUEL HANDLING

Fuel safety

Never start the machine:

1If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

Transport and storage

•Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked flames, for example, from electrical machinery, electric motors, electrical relays/ switches or boilers.

•When storing and transporting fuel always use approved containers intended for this purpose.

•When storing the machine for long periods the fuel tank must be emptied. Contact your local petrol station to find out where to dispose of excess fuel.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The transport guard must always be fitted to the cutting attachment when the machine is being transported or in storage.

•Secure the machine during transport.

!

WARNING! Take care when handling fuel.

Bear in mind the risk of fire, explosion

 

 

and inhaling fumes.

Fuel

CAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of petrol and two-stroke oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

!

WARNING! Fuel and fuel fumes are

highly inflammable and can cause

 

serious injury when inhaled or allowed to

 

come in contact with the skin. For this

 

reason observe caution when handling

 

fuel and make sure there is adequate

 

ventilation.

Petrol

CAUTION! Always use a quality petrol/oil mixture at least 90 octane (RON). If your machine is equipped with a

catalytic converter (see chapter on Technical data) always use a good quality unleaded petrol/oil mixture. Leaded petrol will destroy the catalytic converter.

Use low-emission petrol, also known as alkylate petrol, if it is available.

•The lowest octane recommended is 90 (RON). If you run the engine on a lower octane grade than 90 so- called knocking can occur. This gives rise to a high engine temperature, which can result in serious engine damage.

•When working at continuous high revs a higher octane rating is recommended.

Two-stroke oil

•For best results and performance use JONSERED two-stroke engine oil, which is specially formulated for our air-cooled two-stroke engines.

•Never use two-stroke oil intended for water-cooled engines, sometimes referred to as outboard oil (rated TCW).

•Never use oil intended for four-stroke engines.

•A poor oil quality and/or too high oil/fuel ratio may jeopardise function and decrease the life time of catalytic converters.

•Mixing ratio

1:50 (2%) with JONSERED two-stroke oil.

1:33 (3%) with oils class JASO FB or ISO EGB formulated for air-cooled, two-stroke engines.

Petrol, litre

Two-stroke oil, litre

 

 

 

2% (1:50)

3% (1:33)

 

 

 

5

0,10

0,15

 

 

 

10

0,20

0,30

 

 

 

15

0,30

0,45

 

 

 

20

0,40

0,60

 

 

 

English – 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents FC2145 FC2145S BC2145 FC2145W CC2145 Symbols KEY to SymbolsContents Dear Customer IntroductionWhat is what on the brush cutter? BC What is WHAT?Decompression valve FC 2145 S, FC 2145 W What is what on the brush cutter? CC Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentCutting attachment guard Stop switchVibration damping system Quick releaseLocking nut MufflerLocking screw Cutting equipmentCutting equipment General rulesSharpening the saw blade Sharpening grass cutters and grass bladesBent, twisted, cracked, broken or To straighten a twisted blade so that itTrimmer head Assembling the handlebar and throttle BC 2145, CC AssemblyAssembling the cutting equipment Transport position, handlebarFitting the blade guard and saw blade Fitting other guards and cutting attachments Fitting the trimmer guard and trimmer head Trimmy SIIAdjusting the harness and brush cutter Standard harnessVector harness Correct balance Fuel safety Fuel HandlingFuel Mixing FuellingCheck before starting Starting and StoppingStarting and stopping Cold engineStopping StartingHeated handles FC 2145 W Starter cord around your handWorking Techniques Basic safety rulesGeneral working instructions ABC of clearingForestry clearing using a saw blade Brush cutting with a saw blade Grass trimming with a trimmer head Grass clearing using a grass bladeCarburettor MaintenanceMuffler Cooling systemAir filter Bevel gear Cleaning the air filterDrive shaft Spark plugWinter use Temperature 5C or colderMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataChampion RCJ 6Y Approved accessories Type Cutting attachment guard, Art. no EC-declaration of conformity Applies to Europe only Poly Trim Trimmy SII Page Auto Tap n’Go 45 Spin Page Original instructions 1153306-26

FC2145W, BC2145, CC2145, FC2145S, FC2145 specifications

The Husqvarna FC2145, FC2145S, CC2145, BC2145, and FC2145W are part of a premium range of outdoor power equipment designed to cater to the diverse needs of landscaping, gardening, and recreational tasks. Each model showcases Husqvarna's dedication to innovation, durability, and user-friendly operation while ensuring high performance and efficiency.

The FC2145 series, which includes both the FC2145 and FC2145S, is primarily designed for advanced grass cutting and trimming tasks. The models are equipped with a powerful engine that provides optimal torque and energy efficiency. The ergonomic design of the handles ensures comfort during extended use, reducing fatigue. One notable feature is the lightweight construction, making them easy to maneuver around various terrains and obstacles.

In contrast, the CC2145 model is tailored for concrete and construction work. This robust machine boasts a high-torque engine and a durable chassis, ensuring it can withstand demanding job sites. Its advanced vibration dampening system minimizes user fatigue, enhancing overall productivity. Additionally, the CC2145 incorporates easy-to-use controls, making it accessible for both professionals and DIY enthusiasts.

The BC2145 is a versatile brush cutter that excels in clearing dense vegetation and underbrush. This model is known for its powerful performance and features a dual cutting system that enhances cutting efficiency. Its adjustable loop handle allows for optimal control, especially when working in tight spaces. The BC2145 also comes with a variety of cutting attachments, enabling the user to adapt to different landscaping needs seamlessly.

Lastly, the FC2145W is designed for more specialized applications, offering a dedicated approach to weed control and maintenance. This model features advanced technology that allows for precision cutting, minimizing damage to adjacent plants. Its water-resistant design enhances durability in various weather conditions, making it ideal for both professional landscapers and homeowners.

In conclusion, the Husqvarna FC2145, FC2145S, CC2145, BC2145, and FC2145W models represent the brand's commitment to quality and innovation. Each model brings unique characteristics and technologies that cater to various outdoor needs, ensuring users can achieve their landscaping goals efficiently and effectively. Their blend of power, comfort, and versatility makes them indispensable tools for anyone serious about outdoor maintenance and care.
Top Page Image Contents