Husqvarna CC2145 Starting and Stopping, Check before starting, Starting and stopping, Cold engine

Page 23

STARTING AND STOPPING

Check before starting

•Check the blade to ensure that no cracks have formed at the bottom of the teeth or by the centre hole. The most common reason why cracks are formed is that sharp corners have been formed at the bottom of the teeth while sharpening or that the blade has been used with dull teeth. Discard a blade if cracks are found.

•Check that the support flange is not cracked due to fatigue or due to being tightened too much. Discard the support flange if it is cracked.

•Ensure the locking nut has not lost its captive force. The nut lock should have a locking force of at least 1.5 Nm. The tightening torque of the locking nut should be 35-50 Nm.

•Check that the blade guard is not damaged or cracked. Replace the blade guard if it is exposed to impact or is cracked.

Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been exposed to impact or are cracked.

•Never use the machine without a guard nor with a defective guard.

•All covers must be correctly fitted and undamaged before you start the machine.

Starting and stopping

!

WARNING! The complete clutch cover

and shaft must be fitted before the

 

machine is started, otherwise the clutch

 

can come loose and cause personal

 

injury.

Always move the machine away from the refuelling area before starting. Place the machine on a flat surface. Ensure the cutting attachment cannot come into contact with any object.

Make sure no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury.The safety distance is 15 metres.

Cold engine

Ignition: Set the stop switch to the start position.

Choke: Set the choke control (A) in the choke position.

Primer bulb: Press the air purge diaphragm (B) repeatedly until fuel begins to fill the diaphragm. The diaphragm need not be completely filled.

Warm engine

Use the same starting procedure as for a cold engine but without setting the choke control in the choke position.

Start throttle: (BC 2145, CC 2145)

Set the throttle to the start position by first pressing the throttle lockout and the throttle trigger, then pressing the start throttle button (A). Then release the throttle lockout and the throttle trigger, followed by the start throttle button. The throttle function is now activated. To return the

English – 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents FC2145 FC2145S BC2145 FC2145W CC2145 Symbols KEY to SymbolsContents Dear Customer IntroductionWhat is what on the brush cutter? BC What is WHAT?Decompression valve FC 2145 S, FC 2145 W What is what on the brush cutter? CC Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentQuick release Stop switchCutting attachment guard Vibration damping systemLocking nut MufflerGeneral rules Cutting equipmentLocking screw Cutting equipmentTo straighten a twisted blade so that it Sharpening grass cutters and grass bladesSharpening the saw blade Bent, twisted, cracked, broken orTrimmer head Assembling the handlebar and throttle BC 2145, CC AssemblyAssembling the cutting equipment Transport position, handlebarFitting the blade guard and saw blade Fitting other guards and cutting attachments Fitting the trimmer guard and trimmer head Trimmy SIIVector harness Adjusting the harness and brush cutterStandard harness Correct balance Fuel Fuel safetyFuel Handling Mixing FuellingCold engine Starting and StoppingCheck before starting Starting and stoppingStarter cord around your hand StartingStopping Heated handles FC 2145 WABC of clearing Basic safety rulesWorking Techniques General working instructionsForestry clearing using a saw blade Brush cutting with a saw blade Grass trimming with a trimmer head Grass clearing using a grass bladeCarburettor MaintenanceAir filter MufflerCooling system Spark plug Cleaning the air filterBevel gear Drive shaftWinter use Temperature 5C or colderMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataChampion RCJ 6Y Approved accessories Type Cutting attachment guard, Art. no EC-declaration of conformity Applies to Europe only Poly Trim Trimmy SII Page Auto Tap n’Go 45 Spin Page Original instructions 1153306-26

FC2145W, BC2145, CC2145, FC2145S, FC2145 specifications

The Husqvarna FC2145, FC2145S, CC2145, BC2145, and FC2145W are part of a premium range of outdoor power equipment designed to cater to the diverse needs of landscaping, gardening, and recreational tasks. Each model showcases Husqvarna's dedication to innovation, durability, and user-friendly operation while ensuring high performance and efficiency.

The FC2145 series, which includes both the FC2145 and FC2145S, is primarily designed for advanced grass cutting and trimming tasks. The models are equipped with a powerful engine that provides optimal torque and energy efficiency. The ergonomic design of the handles ensures comfort during extended use, reducing fatigue. One notable feature is the lightweight construction, making them easy to maneuver around various terrains and obstacles.

In contrast, the CC2145 model is tailored for concrete and construction work. This robust machine boasts a high-torque engine and a durable chassis, ensuring it can withstand demanding job sites. Its advanced vibration dampening system minimizes user fatigue, enhancing overall productivity. Additionally, the CC2145 incorporates easy-to-use controls, making it accessible for both professionals and DIY enthusiasts.

The BC2145 is a versatile brush cutter that excels in clearing dense vegetation and underbrush. This model is known for its powerful performance and features a dual cutting system that enhances cutting efficiency. Its adjustable loop handle allows for optimal control, especially when working in tight spaces. The BC2145 also comes with a variety of cutting attachments, enabling the user to adapt to different landscaping needs seamlessly.

Lastly, the FC2145W is designed for more specialized applications, offering a dedicated approach to weed control and maintenance. This model features advanced technology that allows for precision cutting, minimizing damage to adjacent plants. Its water-resistant design enhances durability in various weather conditions, making it ideal for both professional landscapers and homeowners.

In conclusion, the Husqvarna FC2145, FC2145S, CC2145, BC2145, and FC2145W models represent the brand's commitment to quality and innovation. Each model brings unique characteristics and technologies that cater to various outdoor needs, ensuring users can achieve their landscaping goals efficiently and effectively. Their blend of power, comfort, and versatility makes them indispensable tools for anyone serious about outdoor maintenance and care.
Top Page Image Contents