Husqvarna FC2145W, FC2145S, CC2145, BC2145 manual Fuelling, Mixing

Page 22

FUEL HANDLING

Mixing

•Always mix the petrol and oil in a clean container intended for fuel.

•Always start by filling half the amount of the petrol to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of petrol.

•Mix (shake) the fuel mixture thoroughly before filling the machine’s fuel tank.

•Do not mix more than one month’s supply of fuel at a time.

•If the machine is not used for some time the fuel tank should be emptied and cleaned.

 

!

WARNING! The catalytic converter

 

muffler gets very hot during and after

 

 

 

 

use. This also applies during idling. Be

 

 

aware of the fire hazard, especially when

 

 

working near flammable substances and/

 

 

or vapours.

 

 

 

Fuelling

WARNING! Taking the following

!precautions, will lessen the risk of fire:

Do not smoke or place hot objects near fuel.

Always shut off the engine before refuelling.

Always stop the engine and let it cool for a few minutes before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Tighten the fuel cap carefully after refuelling.

Always move the machine away from the refuelling area before starting.

•Always use a fuel container with an anti-spill valve.

•Clean the area around the fuel cap. Contamination in the tank can cause operating problems.

•Ensure that the fuel is well mixed by shaking the container before filling the tank.

22 – English

Page 21 Page 23
Image 22
Page 21 Page 23
Contents FC2145 FC2145S BC2145 FC2145W CC2145 KEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what on the brush cutter? BCDecompression valve FC 2145 S, FC 2145 W What is what on the brush cutter? CC General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutVibration damping system Stop switchCutting attachment guard Quick releaseMuffler Locking nutCutting equipment Cutting equipmentLocking screw General rulesBent, twisted, cracked, broken or Sharpening grass cutters and grass bladesSharpening the saw blade To straighten a twisted blade so that itTrimmer head Assembly Assembling the handlebar and throttle BC 2145, CCTransport position, handlebar Assembling the cutting equipmentFitting the blade guard and saw blade Fitting the trimmer guard and trimmer head Trimmy SII Fitting other guards and cutting attachmentsStandard harness Adjusting the harness and brush cutterVector harness Correct balance Fuel Handling Fuel safetyFuel Fuelling MixingStarting and stopping Starting and StoppingCheck before starting Cold engineHeated handles FC 2145 W StartingStopping Starter cord around your handGeneral working instructions Basic safety rulesWorking Techniques ABC of clearingForestry clearing using a saw blade Brush cutting with a saw blade Grass clearing using a grass blade Grass trimming with a trimmer headMaintenance CarburettorCooling system MufflerAir filter Drive shaft Cleaning the air filterBevel gear Spark plugTemperature 5C or colder Winter useMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataChampion RCJ 6Y Approved accessories Type Cutting attachment guard, Art. no EC-declaration of conformity Applies to Europe only Poly Trim Trimmy SII Page Auto Tap n’Go 45 Spin Page Original instructions 1153306-26

FC2145W, BC2145, CC2145, FC2145S, FC2145 specifications

The Husqvarna FC2145, FC2145S, CC2145, BC2145, and FC2145W are part of a premium range of outdoor power equipment designed to cater to the diverse needs of landscaping, gardening, and recreational tasks. Each model showcases Husqvarna's dedication to innovation, durability, and user-friendly operation while ensuring high performance and efficiency.

The FC2145 series, which includes both the FC2145 and FC2145S, is primarily designed for advanced grass cutting and trimming tasks. The models are equipped with a powerful engine that provides optimal torque and energy efficiency. The ergonomic design of the handles ensures comfort during extended use, reducing fatigue. One notable feature is the lightweight construction, making them easy to maneuver around various terrains and obstacles.

In contrast, the CC2145 model is tailored for concrete and construction work. This robust machine boasts a high-torque engine and a durable chassis, ensuring it can withstand demanding job sites. Its advanced vibration dampening system minimizes user fatigue, enhancing overall productivity. Additionally, the CC2145 incorporates easy-to-use controls, making it accessible for both professionals and DIY enthusiasts.

The BC2145 is a versatile brush cutter that excels in clearing dense vegetation and underbrush. This model is known for its powerful performance and features a dual cutting system that enhances cutting efficiency. Its adjustable loop handle allows for optimal control, especially when working in tight spaces. The BC2145 also comes with a variety of cutting attachments, enabling the user to adapt to different landscaping needs seamlessly.

Lastly, the FC2145W is designed for more specialized applications, offering a dedicated approach to weed control and maintenance. This model features advanced technology that allows for precision cutting, minimizing damage to adjacent plants. Its water-resistant design enhances durability in various weather conditions, making it ideal for both professional landscapers and homeowners.

In conclusion, the Husqvarna FC2145, FC2145S, CC2145, BC2145, and FC2145W models represent the brand's commitment to quality and innovation. Each model brings unique characteristics and technologies that cater to various outdoor needs, ensuring users can achieve their landscaping goals efficiently and effectively. Their blend of power, comfort, and versatility makes them indispensable tools for anyone serious about outdoor maintenance and care.
Top Page Image Contents