Husqvarna CC2145, FC2145W Grass clearing using a grass blade, Grass trimming with a trimmer head

Page 28

WORKING TECHNIQUES

Grass clearing using a grass blade

•Grass blades and grass cutters must not be used on woody stems.

•A grass blade is used for all types of tall or coarse grass.

•The grass is cut down with a sideways, swinging movement, where the movement from right-to-left is the clearing stroke and the movement from left-to- right is the return stroke. Let the left-hand side of the blade (between 8 and 12 o’clock) do the cutting.

•If the blade is angled to the left when clearing grass, the grass will collect in a line, which makes it easier to collect, e.g. by raking.

•Try to work rhythmically. Stand firmly with your feet apart. Move forward after the return stroke and stand firmly again.

•Let the support cup rest lightly against the ground. It is used to protect the blade from hitting the ground.

•Reduce the risk of material wrapping around the blade by following these instructions:

1Always work at full throttle.

2Avoid the previously cut material during the return stroke.

•Stop the engine, unclip the harness and place the machine on the ground before you start to collect the cut material.

Grass trimming with a trimmer head

Trimming

•Hold the trimmer head just above the ground at an angle. It is the end of the cord that does the work. Let the cord work at its own pace. Never press the cord into the area to be cut.

•The cord can easily remove grass and weeds up against walls, fences, trees and borders, however it

28 – English

can also damage sensitive bark on trees and bushes, and damage fence posts.

•Reduce the risk of damaging plants by shortening the cord to 10-12 cm and reducing the engine speed.

Clearing

•The clearing technique removes all unwanted vegetation. Keep the trimmer head just above the ground and tilt it. Let the end of the cord strike the ground around trees, posts, statues and the like. CAUTION! This technique increases the wear on the cord.

•The cord wears quicker and must be fed forward more often when working against stones, brick, concrete, metal fences, etc., than when coming into contact with trees and wooden fences.

•When trimming and clearing you should use less than full throttle so that the cord lasts longer and to reduce the wear on the trimmer head.

Cutting

•The trimmer is ideal for cutting grass that is difficult to reach using a normal lawn mower. Keep the cord parallel to the ground when cutting. Avoid pressing the trimmer head against the ground as this can ruin the lawn and damage the tool.

•Do not allow the trimmer head to constantly come into contact with the ground during normal cutting. Constant contact of this type can cause damage and wear to the trimmer head.

Sweeping

•The fan effect of the rotating cord can be used for quick and easy clearing up. Hold the cord parallel to and above the area to be swept and move the tool to and fro.

•When cutting and sweeping you should use full throttle to obtain the best results.

Page 27 Page 29
Image 28
Page 27 Page 29
Contents FC2145 FC2145S BC2145 FC2145W CC2145 KEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what on the brush cutter? BCDecompression valve FC 2145 S, FC 2145 W What is what on the brush cutter? CC General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutStop switch Cutting attachment guardVibration damping system Quick releaseMuffler Locking nutCutting equipment Locking screwCutting equipment General rulesSharpening grass cutters and grass blades Sharpening the saw bladeBent, twisted, cracked, broken or To straighten a twisted blade so that itTrimmer head Assembly Assembling the handlebar and throttle BC 2145, CCTransport position, handlebar Assembling the cutting equipmentFitting the blade guard and saw blade Fitting the trimmer guard and trimmer head Trimmy SII Fitting other guards and cutting attachmentsStandard harness Adjusting the harness and brush cutterVector harness Correct balance Fuel Handling Fuel safetyFuel Fuelling MixingStarting and Stopping Check before startingStarting and stopping Cold engineStarting StoppingHeated handles FC 2145 W Starter cord around your handBasic safety rules Working TechniquesGeneral working instructions ABC of clearingForestry clearing using a saw blade Brush cutting with a saw blade Grass clearing using a grass blade Grass trimming with a trimmer headMaintenance CarburettorCooling system MufflerAir filter Cleaning the air filter Bevel gearDrive shaft Spark plugTemperature 5C or colder Winter useMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataChampion RCJ 6Y Approved accessories Type Cutting attachment guard, Art. no EC-declaration of conformity Applies to Europe only Poly Trim Trimmy SII Page Auto Tap n’Go 45 Spin Page Original instructions 1153306-26

FC2145W, BC2145, CC2145, FC2145S, FC2145 specifications

The Husqvarna FC2145, FC2145S, CC2145, BC2145, and FC2145W are part of a premium range of outdoor power equipment designed to cater to the diverse needs of landscaping, gardening, and recreational tasks. Each model showcases Husqvarna's dedication to innovation, durability, and user-friendly operation while ensuring high performance and efficiency.

The FC2145 series, which includes both the FC2145 and FC2145S, is primarily designed for advanced grass cutting and trimming tasks. The models are equipped with a powerful engine that provides optimal torque and energy efficiency. The ergonomic design of the handles ensures comfort during extended use, reducing fatigue. One notable feature is the lightweight construction, making them easy to maneuver around various terrains and obstacles.

In contrast, the CC2145 model is tailored for concrete and construction work. This robust machine boasts a high-torque engine and a durable chassis, ensuring it can withstand demanding job sites. Its advanced vibration dampening system minimizes user fatigue, enhancing overall productivity. Additionally, the CC2145 incorporates easy-to-use controls, making it accessible for both professionals and DIY enthusiasts.

The BC2145 is a versatile brush cutter that excels in clearing dense vegetation and underbrush. This model is known for its powerful performance and features a dual cutting system that enhances cutting efficiency. Its adjustable loop handle allows for optimal control, especially when working in tight spaces. The BC2145 also comes with a variety of cutting attachments, enabling the user to adapt to different landscaping needs seamlessly.

Lastly, the FC2145W is designed for more specialized applications, offering a dedicated approach to weed control and maintenance. This model features advanced technology that allows for precision cutting, minimizing damage to adjacent plants. Its water-resistant design enhances durability in various weather conditions, making it ideal for both professional landscapers and homeowners.

In conclusion, the Husqvarna FC2145, FC2145S, CC2145, BC2145, and FC2145W models represent the brand's commitment to quality and innovation. Each model brings unique characteristics and technologies that cater to various outdoor needs, ensuring users can achieve their landscaping goals efficiently and effectively. Their blend of power, comfort, and versatility makes them indispensable tools for anyone serious about outdoor maintenance and care.
Top Page Image Contents