Husqvarna 1153176-26 manual Cutting equipment designed to reduce kickback, Bar, Chain

Page 11

GENERAL SAFETY PRECAUTIONS

•Keep the chain properly tensioned! If the chain is slack it is more likely to jump off and lead to increased wear on the bar, chain and drive sprocket.

•Keep cutting equipment well lubricated and properly maintained! A poorly lubricated chain is more likely to break and lead to increased wear on the bar, chain and drive sprocket.

Cutting equipment designed to reduce kickback

WARNING! Faulty cutting equipment or ! the wrong combination of bar and saw

chain increases the risk of kickback! Only use the bar/saw chain combinations we recommend, and follow the filing instructions. See instructions under the heading Technical data.

The only way to avoid kickback is to make sure that the kickback zone of the bar never touches anything.

By using cutting equipment with ”built-in” kickback reduction and keeping the chain sharp and well- maintained you can reduce the effects of kickback.

Bar

The smaller the tip radius the lower the chance of kickback.

Chain

A chain is made up of a number of links, which are available in standard and low-kickback versions.

IMPORTANT! No saw chain design eliminates the danger of kickback.

WARNING! Any contact with a rotating ! saw chain can cause extremely serious

injuries.

Some terms that describe the bar and chain

To maintain the safety features of the cutting equipment, you should replace a worn or damaged bar or chain with a bar and chain combinations recommended by Husqvarna. See instructions under the heading Technical Data for a list of replacement bar and chain combinations we recommend.

Bar

•Length (inches/cm)

•Number of teeth on bar tip sprocket (T).

•Chain pitch (inches). The spacing between the drive links of the chain must match the spacing of the teeth on the bar tip sprocket and drive sprocket.

•Number of drive links. The number of drive links is determined by the length of the bar, the chain pitch and the number of teeth on the bar tip sprocket.

•Bar groove width (inches/mm). The groove in the bar must match the width of the chain drive links.

•Chain oil hole and hole for chain tensioner. The bar must be matched to the chain saw design.

Chain

•Chain pitch (inches)

•Drive link width (mm/inches)

•Number of drive links.

English – 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 385XP 385XPG 390XP 390XPG Symbols in the operator’s manual KEY to SymbolsSymbols on the machine Contents Dear Customer IntroductionWhat is what on the chain saw? What is WHAT?Always use common sense General Safety PrecautionsBefore using a new chain saw Chain brake and front hand guard Machine′s safety equipmentPersonal protective equipment General Safety Precautions Vibration damping system Throttle lockoutChain catcher Right hand guardGeneral rules Stop switchCutting equipment MufflerInjuries Some terms that describe the bar and chain Cutting equipment designed to reduce kickbackBar ChainGeneral information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingLubricating cutting equipment Tensioning the chainNeedle bearing lubrication Filling with chain oilChecking chain lubrication Chain drive sprocketChecking wear on cutting equipment Working with the chain AssemblyFitting the bar and chain Fitting a spike bumperFuel Fuel HandlingLong-term storage Fuel safetyFuelling Transport and storageWarm engine Starting and StoppingStarting and stopping Cold engineStopping General working instructions Basic safety rulesWorking Techniques Before useJam. Always stop the engine before cleaning Terms Basic cutting techniqueFelling direction Tree felling techniqueLimbing Safe distanceDirectional cuts Clearing the trunk and preparing your retreatFreeing a trapped tree Freeing a tree that has fallen badlyFelling cut Cutting trees and branches that are in tension How to avoid kickbackWhat is kickback? General adviceCutting the trunk into logs General MaintenanceCarburettor adjustment Carburettor without movement limiters Recommended engine speeds are as follows Checking the inertia brake release When the bar hits the stump the brake should be appliedChecking brake band wear Checking the front hand guardImmediately Checking the brake triggerMuffler Changing a broken recoil spring StarterChanging a broken or worn starter cord Tensioning the recoil springMust always be replaced Air filterSpark plug Fitting the starterCooling system Adjustment of the oil pumpLubricating the bar tip sprocket Needle bearing lubricationHeated handles Air Injection centrifugal cleaningTemperature 0C or colder Winter useDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain filing and file gauges Bar and chain combinationsApplies to Europe only EC-declaration of conformityPage Original instructions 1153176-26

1153176-26 specifications

The Husqvarna 1153176-26 is a reliable and innovative addition to the lawn care equipment market, designed specifically to meet the needs of both homeowners and professional landscapers. This product is a hedge trimmer that combines power, precision, and user-friendly features, making it an essential tool for maintaining gardens, hedges, and shrubs.

One of the key features of the Husqvarna 1153176-26 is its robust engine. It is powered by a high-performance, low-emission engine that delivers the power needed for efficient cutting while minimizing environmental impact. This focus on eco-friendliness is a significant technological advancement, setting Husqvarna apart in the competitive outdoor power equipment landscape.

The trimmer is equipped with long, dual-action blades that enhance cutting efficiency and offer improved cutting performance. The length of the blades enables users to tackle larger areas quickly, while the dual-action design reduces vibration, ensuring smoother operation and greater comfort during extended use. This design also contributes to achieving a cleaner cut, which is essential for the health of the plants being trimmed.

Another defining feature of the Husqvarna 1153176-26 is its ergonomic design. The handle is designed to provide comfort and ease of use, allowing operators to maneuver the trimmer with minimal fatigue. Additionally, the soft-grip handles ensure a secure hold, even in challenging conditions.

Safety is paramount in the design of the Husqvarna 1153176-26. The trimmer is equipped with safety features, including a safety lockout system that prevents accidental starts. This ensures that users can work without the constant worry of unintended activation, making it a safe choice for professionals and amateurs alike.

Portability and convenience are also significant considerations in the Husqvarna 1153176-26 design. The lightweight construction makes it easy to transport and operate, while the well-balanced design reduces strain on the arms and shoulders during use.

In summary, the Husqvarna 1153176-26 stands out as a high-quality hedge trimmer, blending power, efficiency, and safety in a user-friendly package. Its advanced engine technology, effective cutting blades, ergonomic design, and focus on safety make it an ideal choice for anyone looking to maintain their landscaping with precision and ease. With this equipment, users can achieve professional results while ensuring their outdoor spaces remain in pristine condition.
Top Page Image Contents