Husqvarna 455e Rancher Air filter, Tensioning the recoil spring, Changing a broken recoil spring

Page 35

MAINTENANCE

•Undo the screw in the centre of the pulley and remove the pulley. Insert and fasten a new starter cord to the pulley. Wind approx. 3 turns of the starter cord onto the pulley.

Connect the pulley to the recoil spring so that the end of the spring engages in the pulley. Fit the screw in the center of the pulley. Insert the starter cord through the hole in the starter housing and the starter handle. Make a secure knot in the end of the starter cord.

Tensioning the recoil spring

•Hook the starter cord in the notch in the pulley and turn the starter pulley about 2 turns clockwise.

Note! Check that the pulley can be turned an additional 1/ 2 turn when the starter cord is pulled all the way out.

1

2

Changing a broken recoil spring

•Lift off the pulley. See instructions under heading Changing a broken or worn starter cord.

•Remove the recoil spring from inside the pulley by tapping the pulley lightly with its inside face downwards against a work bench or the like. If the spring pops out during fitting, wind it up again, working from the outside in towards centre.

•Lubricate the recoil spring with light oil. Fit the pulley and tension the recoil spring.

Fitting the starter

•To fit the starter, first pull out the starter cord and place the starter in position against the crankcase. Then slowly release the starter cord so that the pulley engages with the pawls.

•Fit and tighten the screws that hold the starter.

Air filter

The air filter must be regularly cleaned to remove dust and dirt in order to avoid:

•Carburettor malfunctions

•Starting problems

•Loss of engine power

•Unnecessary wear to engine parts

•Excessive fuel consumption.

•Remove the air filter after taking off the air filter cover. When refitting make sure that the air filter seals tightly against the filter holder. Clean the filter by brushing or shaking it.

The filter can be cleaned more thoroughly by washing it in water and detergent.

An air filter that has been in use for a long time cannot be cleaned completely. The filter must therefore be replaced with a new one at regular intervals. A damaged air filter must always be replaced.

A HUSQVARNA chain saw can be equipped with different types of air filters according to working conditions, weather, season, etc. Contact your dealer for advice.

English – 35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents 455e Rancher Symbols in the operator’s manual KEY to SymbolsSymbols on the machine Contents Dear customer IntroductionWhat is what on the chain saw? What is WHAT?Always use common sense General Safety PrecautionsBefore using a new chain saw Chain brake and front hand guard Machine′s safety equipmentPersonal protective equipment General Safety Precautions Right hand guard Throttle lockoutChain catcher Muffler Stop switchCutting equipment Vibration damping systemChain General rulesCutting equipment designed to reduce kickback BarSharpening cutting teeth Sharpening your chain and adjusting depth gauge settingGeneral information on sharpening cutting teeth Rancher General advice on adjusting depth gauge settingAdjustment of depth gauge setting Tensioning the chainFilling with chain oil Lubricating cutting equipment455e Rancher Chain oilChecking wear on cutting equipment Checking chain lubricationChain drive sprocket Needle bearing lubricationBar 455e Rancher AssemblyFitting the bar and chain RancherAssembly Fuel Fuel HandlingLong-term storage Fuel safetyFueling Transport and storageWarm engine Starting and StoppingStarting and stopping Cold engineStopping General working instructions Basic safety rulesWorking Techniques Before useGeneral rules Terms Basic cutting techniqueGeneral Cutting LimbingClearing the trunk and preparing your retreat Tree felling techniqueSafe distance Felling directionDirectional cuts FellingCutting trees and branches that are in tension General adviceFreeing a tree that has fallen badly Freeing a trapped treeCutting the trunk into logs How to avoid kickbackWhat is kickback? General MaintenanceCarburetor adjustment Checking the front hand guard Correctly adjusted carburetorHigh speed jet H Checking brake band wearChecking the brake trigger Changing a broken or worn starter cord MufflerStarter Fitting the starter Air filterTensioning the recoil spring Changing a broken recoil springNeedle bearing lubrication Adjustment of the oil pumpSpark plug Lubricating the bar tip sprocketCooling system Air Injection centrifugal cleaningTemperature 0C 32F or colder Temperature -5C 23F or colderDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain filing and file gauges Bar and chain combinationsYour Warranty Rights and Obligations Federal Emission Control Warranty StatementOther safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Kickback safety precautionsPage 1150250-95 ´z+R9¶53¨ ´z+R9¶53¨

455e Rancher specifications

The Husqvarna 455e Rancher is a powerful and versatile chainsaw designed for homeowners and professionals alike. This robust equipment is particularly suited for cutting tasks involving firewood, felling small to medium-sized trees, and general property maintenance. Its blend of efficiency, durability, and user-friendly features makes it a popular choice among users.

One of the defining features of the 455e Rancher is its engine, which is a 55.5cc, 2-stroke gas engine that delivers significant power while maintaining a lightweight design. The engine is engineered to be fuel-efficient, allowing users to achieve more cutting time with less refueling. The chainsaw boasts a maximum power output of 3.4 horsepower, ensuring that it can handle heavier loads without straining.

Another significant innovation in the Husqvarna 455e Rancher is the X-Torq technology. This unique system lowers fuel consumption and reduces harmful emissions, making it an environmentally friendly option without sacrificing performance. The chainsaw is also equipped with a LowVib system that minimizes vibration, allowing for extended use without causing fatigue to the operator. This feature contributes to increased comfort and control, making it suitable for prolonged cutting sessions.

The chainsaw features a quick-release air filter that simplifies maintenance. This air filter system keeps debris out of the engine, ensuring optimal performance and longevity. The tool-less chain tensioning system allows users to easily adjust the chain without the need for additional tools, making it convenient and time-efficient.

Safety is a priority with the 455e Rancher, which includes several protective features. The chainsaw comes equipped with a chain brake that automatically activates in case of kickback, reducing the risk of injury. Additionally, the chainsaw's ergonomic design facilitates a secure grip, enhancing safety during operation.

Overall, the Husqvarna 455e Rancher combines power, efficiency, and safety, making it a reliable choice for various cutting tasks. Whether you're a casual user or a seasoned professional, the 455e Rancher provides robust performance and dependable features to handle your landscaping challenges effectively. Its customer-friendly design ensures that it remains a preferred choice in the world of chainsaws.
Top Page Image Contents