Husqvarna 1153181-26 manual Maintenance schedule

Page 40

MAINTENANCE

Maintenance schedule

The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section.

Daily maintenance

Weekly maintenance

Monthly maintenance

 

 

 

 

On chain saws without a catalytic

Check the brake band on the chain

 

brake for wear. Replace when less

Clean the outside of the machine.

converter, check the cooling system

than 0.6 mm (0,024 inch) remains at

 

weekly.

 

the most worn point.

 

 

 

 

 

Check that the components of the

Check the starter, starter cord and

Check the clutch centre, clutch drum

throttle control work safely. (Throttle

return spring.

and clutch spring for wear.

lockout and throttle control.)

 

 

 

 

 

Clean the chain brake and check that

 

 

it operates safely. Make sure that the

Check that the vibration damping

Clean the spark plug. Check that the

chain catcher is undamaged, and

elements are not damaged.

electrode gap is 0.5 mm.

replace it if necessary.

 

 

 

 

 

The bar should be turned daily for

 

 

more even wear. Check the

 

 

lubrication hole in the bar, to be sure it

Lubricate the clutch drum bearing.

Clean the outside of the carburettor.

is not clogged. Clean the bar groove.

 

 

If the bar has a sprocket tip, this

 

 

should be lubricated.

 

 

 

 

 

Check that the bar and chain are

File off any burrs from the edges of

Check the fuel filter and the fuel hose.

getting sufficient oil.

the bar.

Replace if necessary.

 

 

 

Check the saw chain with regard to

 

 

visible cracks in the rivets and links,

 

 

whether the saw chain is stiff or

Clean or replace the spark arrestor

Empty the fuel tank and clean the

whether the rivets and links are

mesh on the muffler.

inside.

abnormally worn. Replace if

 

 

necessary.

 

 

 

 

 

Sharpen the chain and check its

 

 

tension and condition. Check the

Clean the carburettor compartment.

Empty the oil tank and clean the

drive sprocket for excessive wear and

inside.

 

replace if necessary.

 

 

 

 

 

Clean the starter units air intake.

Clean the air filter. Replace if

Check all cables and connections.

necessary.

 

 

 

 

 

Check that nuts and screws are tight.

 

 

 

 

 

Check that the stop switch works

 

 

correctly.

 

 

 

 

 

Check that there are no fuel leaks

 

 

from the engine, tank or fuel lines.

 

 

 

 

 

On chain saws with a catalytic

 

 

converter, check the cooling system

 

 

daily.

 

 

 

 

 

40 – English

Page 39 Page 41
Image 40
Page 39 Page 41
Contents 570 576 XP 576 XPG Symbols on the machine KEY to SymbolsSymbols in the operator’s manual Contents Introduction Dear CustomerWhat is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawMachine′s safety equipment Always use common sensePersonal protective equipment Chain brake and front hand guardGeneral Safety Precautions Throttle lockout Chain catcherStop switch Right hand guardVibration damping system MufflerGeneral rules Cutting equipmentCutting equipment designed to reduce kickback Sharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethGeneral advice on adjusting depth gauge setting Increased if the depth gauge setting isAdjustment of depth gauge setting Sharpening cutting teethTensioning the chain Lubricating cutting equipmentCause serious or even fatal injury Which could lead to serious, even fatal injuries Chain oilChecking chain lubrication Chain drive sprocketNeedle bearing lubrication Checking wear on cutting equipmentBar Assembly Fitting the bar and chainFitting a spike bumper Working with the chainFuel Handling FuelPetrol Two-stroke oilFuelling Fuel safetyChain oil Transport and storage Long-term storageStarting and Stopping Starting and stoppingCold engine Warm engineStopping Basic safety rules Working TechniquesBefore use General working instructionsJam. Always stop the engine before cleaning Basic cutting technique TermsTree felling technique LimbingLog is supported at one end. There is a high risk Safe distanceClearing the trunk and preparing your retreat Felling directionDirectional cuts Felling cut General advice Freeing a tree that has fallen badlyFreeing a trapped tree Cutting trees and branches that are in tensionWhat is kickback? How to avoid kickbackCutting the trunk into logs Carburettor adjustment MaintenanceGeneral Correctly adjusted carburettor High speed jet HChecking brake band wear Checking the front hand guardChecking the inertia brake release ImmediatelyMuffler Starter Changing a broken or worn starter cordTensioning the recoil spring Changing a broken recoil springAir filter Spark plugLubricating the bar tip sprocket Must always be replacedAdjustment of the oil pump Air Injection centrifugal cleaningRunning when making adjustments Needle bearing lubricationTemperature 0C or colder Temperature -5C or colderWinter use Fitting the winterising kitElectrical carburettor heating Heated handles576 XPG Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataBar and chain combinations Saw chain filing and file gaugesApplies to Europe only EC-declaration of conformityEN ISO 12100-22003, Cispr 122001, EN ISO 1153181-26

1153181-26 specifications

The Husqvarna 1153181-26 is a highly regarded chainsaw that blends performance, reliability, and user-friendly features. Known for its robustness, this model is designed to meet the needs of both professional users and knowledgeable homeowners. With its powerful engine and innovative technology, the 1153181-26 stands out in the competitive landscape of outdoor power tools.

One of the standout features of the Husqvarna 1153181-26 is its X-Torq engine technology, which significantly reduces fuel consumption and emissions without compromising performance. This two-stroke engine generates substantial power, enabling smooth cutting encounters even with tougher materials. The fuel efficiency achieved through this technology makes it an environmentally friendly option, aligning with modern sustainability goals.

The chainsaw is equipped with an automatic oiling system that ensures proper lubrication of the bar and chain during operation. This feature prolongs the life of the saw and enhances overall cutting performance. Additionally, the adjustable oil pump allows users to control the oil flow according to their needs, making it adaptable for different tasks and conditions.

Another notable characteristic is the lightweight design of the 1153181-26, which improves maneuverability and reduces user fatigue during extended periods of use. The ergonomically designed handle provides a comfortable grip, ensuring better control and precision while cutting. Coupled with a low vibration system, this model minimizes operator fatigue, making it suitable for both novice and seasoned users.

Safety is a core principle in the design of the Husqvarna 1153181-26. It features a chain brake that stops the chain in the event of kickback, protecting the user from potential injuries. The saw also incorporates a protective cover over the chain, safeguarding it during storage and transport.

In conclusion, the Husqvarna 1153181-26 is a versatile and dependable chainsaw that excels in power, efficiency, and safety. With its state-of-the-art features like the X-Torq engine, automatic oiling system, and ergonomic design, it appeals to anyone looking for a reliable tool for outdoor cutting tasks. Whether trimming branches or felling trees, this model provides the performance and comfort needed to accomplish a variety of tasks effectively.
Top Page Image Contents