Hustler Turf Z4 manual Using a ramp, Slope Operation

Page 15

Follow the manufacturer’s recommendation for wheel weights or counterweights.

If any attachment or additional weight is mounted on the rear of the unit, any rapid movement of the control levers in either direction could result in a reaction of the tractor that can cause serious injury.

Clean flammable material from machine. Prevent fires by keeping engine compartment, exhaust area, battery, fuel line, fuel tank and operator’s station clean of accumulated trash, grass clippings, and other debris. Always clean up spilled fuel and oil.

Always secure the ROPS in the raised position and buckle seat belt before starting tractor.

Using a ramp

Use extreme caution when loading and unloading a unit onto a truck or trailer with a ramp.

Use only a single, full width ramp; do not use individual ramps for each side of the unit. Having a full width ramp provides a surface for the tractor frame to contact if the unit starts to tip backwards. It also reduces the risk of a wheel going off and the machine tipping over.

Do not exceed a 15 degree angle between the ramp and the ground or between the ramp and the trailer or truck. When on a ramp avoid sudden acceleration

Slope Operation

Slopes are a major factor in loss-of-control and tip-over accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it; do not mow it. REMINDER: Only operate on slopes of 15 degrees or less.

Use extreme caution when operating on slopes.

Be extremely careful changing directions on a slope. Slow down.

Do not operate where the machine could slip or tip.

Turn slowly

Turn on the most level part of the slope

To maximize traction, it is better to turn the front of the machine uphill, rather than downhill. If drive tires lose traction, steering control is lost which could cause serious injury or death.

If it becomes necessary to turn downhill, turn slowly and gradually, if possible.

Do not remove or modify the stabilizer wheels.

Watch for holes, ruts, bumps, rocks or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

Remove obstacles such as rocks, tree limbs, etc.

Keep all movement on slopes slow and gradual. Do not make sudden changes in speed or direction.

Avoid starting and stopping on a slope. If tires lose trac- tion, disengage the blades and proceed slowly straight down the slope.

Mow a safe distance (minimum of 10 feet) away from drop-offs, retaining walls, drainage ditches, embank- ments, water, and other types of hazards to avoid a wheel dropping over the edge or to avoid the ground from breaking away. This will reduce the risk of the machine suddenly rolling over causing serious injury or death.

Use a walk behind, push mower or hand-held trimmer on slopes and near drop-offs, retaining walls, drainage ditches, embankments and water to avoid machine roll- over and serious injury or death.

Do not mow on wet grass. Slippery conditions reduce traction which could cause sliding and loss of control. Do not tow on slopes. The weight of the towed equip- ment may cause loss of traction and loss of control.

Do not try to stabilize the machine by putting your foot on the ground.

If the mower’s tires lose traction when operating on slopes, disengage the blades, place the control levers in the park brake position, turn the engine off and get help. Never make sudden starts, stops, turns, or reverse direc- tion, especially when maneuvering on slopes. The steer- ing is designed for sensitive response. Rapid movement of the control levers in either direction could result in a reaction of the tractor that can cause serious injury.

Never stop suddenly while backing down slopes. This action may result in a reaction of the tractor that can cause serious physical injury.

The Hustler mower is capable of operating horizontally (traverse) on moderately steep slopes. When operating on slopes up to 15 degrees, be aware of any conditions that may cause the tractor drive tires to lose traction resulting in a possible loss of control of the machine. An operator should not operate on a slope until he is thor- oughly familiar with the equipment.

Do not operate on slopes greater than 15 degrees. Refer to the Slope Guide, page 2-7, when determining the degree of slope to be mowed.

It is strongly recommended that the operator drive the machine off of the slope, using extreme caution, if any sign of loss of traction is detected. Wait until the condi- tion that caused the problem is resolved before attempt- ing to operate on the slope again.

Terrain conditions can affect traction resulting in possible loss of control of the machine. Some of the conditions to be aware of are:

1.Wet terrain

2.Depressions in the ground; i.e. holes, ruts, washouts

3.Mounds of dirt

4.Soil type; i.e. sand, loose dirt, gravel, clay

5.Grass type, density, and height

6.Extremely dry conditions of grass

7.Tire pressure

The attachments mounted to the tractor will also affect the way it handles on a slope. Be aware that each attach- ment’s characteristics vary.

Do not tow on slopes. The weight of the towed equip- ment may cause loss of traction and loss of steering con- trol.

Another consideration to safe mowing on slopes is to be aware of what is located at the bottom of the slope. Extreme caution should be used when there is a hazard located at the bottom of the slope. Some examples are:

1.Water; i.e. lake, river

2.Cliffs, retaining walls

3.Roads, highways

4.Buildings

3-2

602223_0609

Image 15
Contents Page General Information 6022230609 What is Covered by this Warranty Disclaimer of Warranty Safety and Instruction Decals Safety PrecautionsPart Part Number Part Number BJE OFF International SymbolsSlope Guide 6022230609 Operation Safe Operating PracticesOperation Slope Operation Using a rampControls Safety start interlock systemChildren Control PanelEngine starting Check tractor safety start interlock system daily, prior toTorque values are given below Stopping the engineMoving tractor with stalled engine Roll Over Protective StructurePossible damage to the Rops Driving the tractorDirection of arrows indicate direction of tractor movement Front of Tractor Faces this DirectionTractor towing Operating suggestionsThree point turn Ve oDeck cutting height adjustment Mower deck operationAnti-scalp wheels 6022230609 Introduction Maintenance & AdjustmentsService Safe Servicing PracticesElectrical system Torque valuesTires LubricationFuel system Hydraulic systemOverservicing Recommended service procedureEngine oil and filter Engine air filterMower blade maintenance General engine maintenance BeltsStandard seat Seat adjustmentControl lever adjustment Mower blade removal6022230609 Hustler Z4 48/54/60 Maintenance Schedule Refer to Fig Hustler Z4 48/54/60 Maintenance Locator Chart Maintenance Locator Chart6022230609 Symptoms Probable Causes Suggested Remedies Hustler Z4 TroubleshootingPreparation of engine for storage Preparation of battery for storageStorage Product LiteratureIndex 6022230609

Z4 specifications

The Hustler Turf Z4 is an exceptional zero-turn mower designed for both commercial landscapers and residential users seeking high performance and efficiency. Known for its robust construction and outstanding maneuverability, the Z4 stands out in the competitive field of lawn care equipment.

One of the key features of the Hustler Turf Z4 is its powerful engine options. Equipped with a choice of Kawasaki or Kohler engines, the Z4 delivers reliable performance and impressive torque, ensuring that it can handle tough mowing conditions with ease. The engine options range from 19.5 to 25 horsepower, providing ample power for various lawn sizes and terrain types.

The Z4 features a cutting width of 42 to 54 inches, allowing users to cover large areas in less time. Its innovative cutting deck design promotes superior grass clipping dispersion, leaving behind a clean and even finish. The deck is reinforced for added durability, making it capable of withstanding the rigors of frequent use, whether in commercial landscapes or home lawns.

One of the standout technologies in the Hustler Turf Z4 is the patented SmoothTrak steering system, which allows for precise control and effortless turns. This feature enhances maneuverability around obstacles, flower beds, and tight corners, making mowing a more efficient task. Combined with its low center of gravity, the Z4 offers stability on hills and uneven surfaces.

The Hustler Turf Z4 also prioritizes user comfort and ease of operation. The ergonomic seat design supports long hours of mowing without discomfort, and the intuitive control layout ensures that even novice users can operate the mower with confidence. The easy-to-adjust cutting height allows for quick transitions between different grass types or blooming flowers.

Additionally, the Z4 is equipped with convenient maintenance features. The flip-up deck allows for easy access to the blades for cleaning and sharpening, while the integrated grease fittings simplify lubrication.

In conclusion, the Hustler Turf Z4 is a powerful and versatile zero-turn mower that combines advanced technology with user-friendly features. Designed for performance and durability, it caters to the needs of both professionals and homeowners who demand efficiency and quality in their lawn care equipment. Whether tackling expansive lawns or intricate landscaping, the Z4 rises to the occasion with style and precision.