Hustler Turf Z4 manual Part Number

Page 8

Part Number 601968

•

WARNING: Fluid under pressure!

601968

••Avoid hydraulic fluid escaping under pressure

••Hydraulic fluid escaping under pressure can pene- trate skin.

••Hydraulic fluid escaping under pressure may have sufficient force to penetrate skin and cause serious injury. Foreign fluid injected into the skin must be surgically removed within a few hours by a doctor, familiar with this form of injury, or gangrene may result.

••Before applying pressure to hydraulic system, make sure all connections are tight and all hoses and lines are in good condition.

••Relieve all pressure in the system before discon- necting or working on hydraulic lines.

••To find a leak under pressure, use a piece of card- board or wood – never use your hands.

••To relieve all pressure in system, lower attachment and turn engine off.

601635

Part Number 601635

Read Owner’s Manual and decals before attempting to operate this machine.

WARNING: This structure’s protective capability may be impaired by structural damage, overturn, or alteration. If any of these conditions occur, this structure must be replaced.

•Avoid crushing, use seat belt.

•Do not jump if machine tips.

•To minimize chance of injury or death from rollover; keep ROPS in the raised and locked position and use the seat belt.

•Never operate machine on a slope with the ROPS folded down (lowered position).

•There is no roll over protection when the ROPS is in the lowered position.

•Lower the ROPS only when absolutely necessary. Drive slowly and care- fully. Raise the ROPS as soon as clearance permits.

•Read and follow slopes operation instructions and warnings.

•Do not wear seat belt when the ROPS is in the lowered position.

•Always pull from the tractor hitch.

•Do not attach chains or ropes to the ROPS for pulling purposes, as the machine can tip backwards.

601635

602223_0609

2-3

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Page General Information 6022230609 What is Covered by this Warranty Disclaimer of Warranty Safety Precautions Safety and Instruction DecalsPart Part Number Part Number BJE International Symbols OFFSlope Guide 6022230609 Operation OperationSafe Operating Practices Using a ramp Slope OperationSafety start interlock system ChildrenControl Panel ControlsCheck tractor safety start interlock system daily, prior to Engine startingStopping the engine Moving tractor with stalled engineRoll Over Protective Structure Torque values are given belowDriving the tractor Possible damage to the RopsFront of Tractor Faces this Direction Tractor towingOperating suggestions Direction of arrows indicate direction of tractor movementVe o Three point turnAnti-scalp wheels Deck cutting height adjustmentMower deck operation 6022230609 Maintenance & Adjustments ServiceSafe Servicing Practices IntroductionTorque values TiresLubrication Electrical systemHydraulic system Fuel systemRecommended service procedure Engine oil and filterEngine air filter OverservicingGeneral engine maintenance Belts Mower blade maintenanceSeat adjustment Control lever adjustmentMower blade removal Standard seat6022230609 Hustler Z4 48/54/60 Maintenance Schedule Refer to Fig Maintenance Locator Chart Hustler Z4 48/54/60 Maintenance Locator Chart6022230609 Hustler Z4 Troubleshooting Symptoms Probable Causes Suggested RemediesPreparation of battery for storage StorageProduct Literature Preparation of engine for storageIndex 6022230609

Z4 specifications

The Hustler Turf Z4 is an exceptional zero-turn mower designed for both commercial landscapers and residential users seeking high performance and efficiency. Known for its robust construction and outstanding maneuverability, the Z4 stands out in the competitive field of lawn care equipment.

One of the key features of the Hustler Turf Z4 is its powerful engine options. Equipped with a choice of Kawasaki or Kohler engines, the Z4 delivers reliable performance and impressive torque, ensuring that it can handle tough mowing conditions with ease. The engine options range from 19.5 to 25 horsepower, providing ample power for various lawn sizes and terrain types.

The Z4 features a cutting width of 42 to 54 inches, allowing users to cover large areas in less time. Its innovative cutting deck design promotes superior grass clipping dispersion, leaving behind a clean and even finish. The deck is reinforced for added durability, making it capable of withstanding the rigors of frequent use, whether in commercial landscapes or home lawns.

One of the standout technologies in the Hustler Turf Z4 is the patented SmoothTrak steering system, which allows for precise control and effortless turns. This feature enhances maneuverability around obstacles, flower beds, and tight corners, making mowing a more efficient task. Combined with its low center of gravity, the Z4 offers stability on hills and uneven surfaces.

The Hustler Turf Z4 also prioritizes user comfort and ease of operation. The ergonomic seat design supports long hours of mowing without discomfort, and the intuitive control layout ensures that even novice users can operate the mower with confidence. The easy-to-adjust cutting height allows for quick transitions between different grass types or blooming flowers.

Additionally, the Z4 is equipped with convenient maintenance features. The flip-up deck allows for easy access to the blades for cleaning and sharpening, while the integrated grease fittings simplify lubrication.

In conclusion, the Hustler Turf Z4 is a powerful and versatile zero-turn mower that combines advanced technology with user-friendly features. Designed for performance and durability, it caters to the needs of both professionals and homeowners who demand efficiency and quality in their lawn care equipment. Whether tackling expansive lawns or intricate landscaping, the Z4 rises to the occasion with style and precision.
Top Page Image Contents