Husqvarna 1153191-26 manual KEY to Symbols

Page 3

KEY TO SYMBOLS

Symbols

WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

• Hearing protection

• Approved eye protection

This product is in accordance with applicable EC directives.

Gloves should be worn when necessary.

The blower can forcibly throw objects that can bounce back. This can result in serious eye injuries if the recommended safety equipment is not used.

The blower operator

must ensure that no people or animals come

closer than 15 metres. When several operators

are working at the same site a safety distance of at least 15 metres must be in effect.

A breathing mask should be used when there is a risk of dust.

Noise emission to the environment according to the European Community’s Directive. The machine’s emission is specified in chapter Technical data and on label.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.

Always wear protective gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be worn.

English 3

Image 3
Contents 356BTX-series Dear Customer IntroductionSymbols KEY to SymbolsContents Personal protective equipment Safety InstructionsMachine′s safety equipment Stop switchMuffler Vibration damping systemGeneral General safety precautionsTransport and storage Fuel safetyAdjusting the harness StartingGeneral working instructions Basic safety rulesBasic working techniques What is what on the blower? What is WHAT?Assembling the blow pipe and control handle AssemblyAccessories HandlebarFlat nozzle Two-stroke oil Fuel HandlingFuel PetrolFuelling Warm engine Starting and StoppingStarting and stopping Cold engineMaintenance CarburettorMuffler Cooling system Spark plugAir filter Cleaning the air filter Oiling the air filterMust always be replaced Monthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceTechnical data Technical DataEN ISO 12100-2/A12009, Cispr 122001, EN155032009 EC-declaration of conformity Applies to Europe onlyPage Original instructions 1153191-26