Husqvarna 1153191-26 manual Contents

Page 4

CONTENTS

Contents

 

INTRODUCTION

 

Dear Customer,

2

KEY TO SYMBOLS

 

Symbols

3

CONTENTS

 

Contents

4

Note the following before starting:

4

SAFETY INSTRUCTIONS

 

Personal protective equipment

5

Machines safety equipment

5

Checking, maintaining and servicing the

 

machines safety equipment

6

General safety precautions

7

General working instructions

9

WHAT IS WHAT?

 

What is what on the blower?

11

ASSEMBLY

 

Assembling the blow pipe and control handle

12

FUEL HANDLING

 

Fuel

14

Fuelling

15

STARTING AND STOPPING

 

Starting and stopping

16

MAINTENANCE

 

Carburettor

17

Muffler

17

Cooling system

18

Spark plug

18

Air filter

18

Maintenance schedule

20

TECHNICAL DATA

 

Technical data

21

EC-declaration of conformity

22

Note the following before starting:

Please read the operator’s manual carefully.

WARNING! Long-term exposure to noise

! can result in permanent hearing impairment. So always use approved hearing protection.

WARNING! Under no circumstances may

! the design of the machine be modified without the permission of the manufacturer. Always use genuine accessories. Non-authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others.

WARNING! A blower is a dangerous tool

! if used carelessly or incorrectly and can cause serious, even fatal injuries. It is extremely important that you read and understand the contents of this Operator’s manual.

Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.

The machine is only designed for blowing lawns, pathways, asphalt roads and the like.

4 – English

Image 4
Contents 356BTX-series Introduction Dear CustomerKEY to Symbols SymbolsContents Safety Instructions Machine′s safety equipmentStop switch Personal protective equipmentVibration damping system MufflerGeneral safety precautions GeneralFuel safety Adjusting the harnessStarting Transport and storageBasic safety rules General working instructionsBasic working techniques What is WHAT? What is what on the blower?Assembly Assembling the blow pipe and control handleHandlebar AccessoriesFlat nozzle Fuel Handling FuelPetrol Two-stroke oilFuelling Starting and Stopping Starting and stoppingCold engine Warm engineCarburettor MaintenanceMuffler Spark plug Cooling systemAir filter Oiling the air filter Cleaning the air filterMust always be replaced Maintenance schedule Daily maintenanceWeekly maintenance Monthly maintenanceTechnical Data Technical dataEC-declaration of conformity Applies to Europe only EN ISO 12100-2/A12009, Cispr 122001, EN155032009Page Original instructions 1153191-26