Husqvarna 1153191-26 manual Fuelling

Page 15

FUEL HANDLING

Fuelling

WARNING! Taking the following

!precautions, will lessen the risk of fire:

Do not smoke or place hot objects near fuel.

Always shut off the engine before refuelling.

Always stop the engine and let it cool for a few minutes before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Tighten the fuel cap carefully after refuelling.

Always move the machine away from the refuelling area before starting.

Move the machine at least 3 m from the refuelling point before starting it.

Clean the area around the fuel cap. Contamination in the tank can cause operating problems.

Ensure that the fuel is well mixed by shaking the container before filling the tank.

English 15

Image 15
Contents 356BTX-series Dear Customer IntroductionSymbols KEY to SymbolsContents Personal protective equipment Safety InstructionsMachine′s safety equipment Stop switchMuffler Vibration damping systemGeneral General safety precautionsTransport and storage Fuel safetyAdjusting the harness StartingGeneral working instructions Basic safety rulesBasic working techniques What is what on the blower? What is WHAT?Assembling the blow pipe and control handle AssemblyAccessories HandlebarFlat nozzle Two-stroke oil Fuel HandlingFuel PetrolFuelling Warm engine Starting and StoppingStarting and stopping Cold engineMaintenance CarburettorMuffler Cooling system Spark plugAir filter Cleaning the air filter Oiling the air filterMust always be replaced Monthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceTechnical data Technical DataEN ISO 12100-2/A12009, Cispr 122001, EN155032009 EC-declaration of conformity Applies to Europe onlyPage Original instructions 1153191-26