Husqvarna K3600 MKII manual Starting and Stopping, Starting and stopping

Page 14

STARTING AND STOPPING

WARNING! Note the following before

!starting:

Make sure you are standing properly and that the blade can not come into contact with anything.

Keep people and animals well away from the working area.

Check that the power source (the hydraulic unit) supplies the correct oil ﬂow and oil pressure.

•Grip the front handle with the left hand.

•Grip the rear handle with the right hand. When you grip the rear handle this releases the switch lock.

The machine is stopped by releasing the switch.

14 – English

Image 14

Contents K3600 Mkii KEY to Symbols Key to symbolsContents What is WHAT? What is what on the power cutter?Machine′s safety equipment Safety InstructionsSteps before using a new power cutter SwitchChecking the switch lock Switch lock and ON/OFF valve for the waterChecking the starting and stopping functions of the switch Blade guardGeneral working instructions General safety precautionsBasic safety rules Checking the blade guardCutting Cutting techniqueHow to avoid kickback Large workDiamond blades PullDrive Settings and AdjustmentsBasic service Fitting the bladeSettings and Adjustments Water supply Hydraulic hosesWater hose Water dosageStarting Starting and StoppingStarting and stopping StoppingDismantling the complete guide roller MaintenanceMaintenance Assembling the complete guide rollerDrive wheel Replacing the support rollers/guide rollersReconstructing the blade CouplingsMaintenance schedule Blades conforming to EN13236Trouble Shooting MechanicsTechnical Data Extending the hydraulic hosesEC-declaration of conformity ´z+R=J¶6G¨ Page 1150294-26 ´z+R=J¶6G¨ ´z+R=J¶6G¨