Husqvarna K3600 MKII manual KEY to Symbols, Key to symbols

Page 2

KEY TO SYMBOLS

Key to symbols

WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

• Approved protective helmet

• Approved hearing protection

Protective goggles or a visor

Breathing mask

This product is in accordance with applicable EC directives.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

Always disconnect the machine from the hydraulic hoses before inspection and/or maintenance of the machine.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be worn.

2 – English

Image 2
Contents K3600 Mkii KEY to Symbols Key to symbolsContents What is WHAT? What is what on the power cutter?Machine′s safety equipment Safety InstructionsSteps before using a new power cutter SwitchChecking the switch lock Switch lock and ON/OFF valve for the waterChecking the starting and stopping functions of the switch Blade guardGeneral working instructions General safety precautionsBasic safety rules Checking the blade guardCutting Cutting techniqueHow to avoid kickback Large workDiamond blades PullDrive Settings and AdjustmentsBasic service Fitting the bladeSettings and Adjustments Water supply Hydraulic hosesWater hose Water dosageStarting Starting and StoppingStarting and stopping StoppingDismantling the complete guide roller MaintenanceMaintenance Assembling the complete guide rollerDrive wheel Replacing the support rollers/guide rollersReconstructing the blade CouplingsMaintenance schedule Blades conforming to EN13236Trouble Shooting MechanicsTechnical Data Extending the hydraulic hosesEC-declaration of conformity ´z+R=J¶6G¨ Page 1150294-26 ´z+R=J¶6G¨ ´z+R=J¶6G¨