Husqvarna 235F Warm engine, Starting, For throttle handles with a start throttle lock, Stopping

Page 21

STARTING AND STOPPING

Primer bulb: Press the air purge repeatedly until fuel begins to fill the bulb. The bulb need not be completely filled.

Warm engine

Ignition: Set the stop switch to the start position.

Choke: Set the throttle to the start position by moving the choke control to the choke position and then returning it to its original position.

Primer bulb: Press the air purge repeatedly until fuel begins to fill the bulb. The bulb need not be completely filled.

WARNING! When the engine is started

! with the choke in either the choke or start throttle positions the cutting attachment will start to rotate immediately.

Starting

Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot!). Grip the starter handle, slowly pull out the cord with your right hand until

you feel some resistance (the starter pawls grip), now quickly and powerfully pull the cord.

Repeat pulling the cord until the engine starts. When the engine starts. return choke control to run position and apply full throttle; the throttle will automatically disengage from the start setting.

CAUTION! Do not pull the starter cord all the way out and do not let go of the starter handle when the cord is fully extended. This can damage the machine.

For throttle handles with a start throttle lock:

Set the throttle to the start position by first pressing the throttle lockout and the throttle trigger, then pressing the start throttle button (A). Then release the throttle lockout and the throttle trigger, followed by the start throttle button. The throttle function is now activated. To return the engine to idle, press the throttle lockout and throttle trigger again.

Stopping

Stop the engine by switching off the ignition.

English – 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 235R 235FR Symbols KEY to SymbolsOperator of the machine must Ensure, while working, that no Persons or animals come closer thanContents Dear Customer IntroductionWhat is what? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentCutting attachment guard Stop switchVibration damping system Quick releaseLocking nut MufflerCutting equipment Cutting equipmentGeneral rules Sharpening the saw blade Sharpening grass cutters and grass bladesTrimmer head Assembly Fitting the handlebarTransport position, handlebar Assembling the cutting equipment Fitting a blade guard, grass blade and grass cutterFitting the blade guard and saw blade AM L Fitting the trimmer guard and trimmer head Trimmy SIIAdjusting the harness and brush cutter Fitting other guards and cutting attachmentsSpreading the load on your shoulders Correct balance Correct heightForestry clearing Grass clearing Fuel safety Fuel Handling Fuel Mixing FuellingCheck before starting Starting and StoppingStarting and stopping Cold engineStarting Warm engineFor throttle handles with a start throttle lock StoppingWorking Techniques Basic safety rulesGeneral working instructions ABC of clearingControl the felling direction take advantage of the wind Forestry clearing using a saw blade Brush cutting with a saw blade Grass clearing using a grass bladeGrass trimming with a trimmer head TrimmingSweeping CuttingCarburettor MaintenanceMuffler Cooling systemBevel gear Air filter Cleaning the air filterSpark plug Oiling the air filterMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataEC-declaration of conformity Applies to Europe only Page S35 2,7mm 095-.106 25 m 15 cm T35, T35x T45, T45x Auto Trimmy SII Page Page Page Page Original instructions 1153284-26
Top Page Image Contents