Husqvarna 235F manual Control the felling direction take advantage of the wind

Page 23

WORKING TECHNIQUES

•Control the felling direction (take advantage of the wind).

WARNING! Neither the operator of the

!machine nor anyone else may attempt to remove the cut material while the engine is running or the cutting equipment is rotating, as this can result in serious injury.

Stop the engine and cutting equipment before you remove material that has wound around the blade shaft as otherwise there is a risk of injury. The bevel gear can get hot during use and may remain so for a while afterwards.You could get burnt if you touch it.

WARNING! Watch out for thrown objects.

!Always wear approved eye protection. Never lean over the cutting attachment guard. Stones, rubbish, etc. can be thrown up into the eyes causing blindness or serious injury.

Keep unauthorised persons at a distance. Children, animals, onlookers and helpers should be kept outside the safety zone of 15 m. Stop the machine immediately if anyone approaches. Never swing the machine around without first checking behind you to make sure no- one is within the safety zone.

WARNING! Sometimes branches or

!grass get caught between the guard and cutting attachment. Always stop the engine before cleaning.

Working methods

WARNING! Machines fitted with saw

!blades or grass blades can be thrown violently to the side when the blade comes into contact with a fixed object. This is called blade thrust. A blade thrust can be violent enough to cause the machine and/or operator to be propelled in any direction, and possibly lose control of the machine. Blade thrust can occur without warning if the machine snags, stalls or binds. Blade thrust is more likely to occur in areas where it is difficult to see the material being cut.

Avoid cutting with the area of the blade between the 12 o'clock and 3 o'clock positions. Because of the speed of rotation of the blade, blade thrust can occur if you attempt to cut thick stems with this area of the blade.

•Before you start clearing, check the clearing area, the type of terrain, the slope of the ground, whether there are stones, hollows etc.

•Start at whichever end of the area is easiest, and clear an open space from which to work.

•Work systematically to and fro across the area, clearing a width of around 4-5 m on each pass. This exploits the full reach of the machine in both directions and gives the operator a convenient and varied working area to work in.

•Clear a strip around 75 m long. Move your fuel can as work progresses.

•On sloping ground you should work along the slope. It is much easier to work along a slope than it is to work up and down it.

•You should plan the strip so that you avoid going over ditches or other obstacles on the ground. You should also orient the strip to take advantage of wind

English – 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 235R 235FR Persons or animals come closer than KEY to SymbolsSymbols Operator of the machine must Ensure, while working, that noContents Dear Customer IntroductionWhat is what? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentQuick release Stop switchCutting attachment guard Vibration damping systemLocking nut MufflerGeneral rules Cutting equipmentCutting equipment Sharpening the saw blade Sharpening grass cutters and grass bladesTrimmer head Transport position, handlebar AssemblyFitting the handlebar Fitting the blade guard and saw blade Assembling the cutting equipmentFitting a blade guard, grass blade and grass cutter AM L Fitting the trimmer guard and trimmer head Trimmy SIISpreading the load on your shoulders Adjusting the harness and brush cutterFitting other guards and cutting attachments Grass clearing Correct heightCorrect balance Forestry clearingFuel Fuel safetyFuel Handling Mixing FuellingCold engine Starting and StoppingCheck before starting Starting and stoppingStopping Warm engineStarting For throttle handles with a start throttle lockABC of clearing Basic safety rulesWorking Techniques General working instructionsControl the felling direction take advantage of the wind Forestry clearing using a saw blade Trimming Grass clearing using a grass bladeBrush cutting with a saw blade Grass trimming with a trimmer headSweeping CuttingCarburettor MaintenanceBevel gear MufflerCooling system Oiling the air filter Cleaning the air filterAir filter Spark plugMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataEC-declaration of conformity Applies to Europe only Page S35 2,7mm 095-.106 25 m 15 cm T35, T35x T45, T45x Auto Trimmy SII Page Page Page Page Original instructions 1153284-26

235F specifications

The Husqvarna 235F is a versatile and powerful string trimmer designed for users seeking efficient trimming and cutting solutions for their gardens and landscapes. This model is ideal for both homeowners and professional landscapers, providing an excellent balance of performance, durability, and ease of use.

One of the standout features of the Husqvarna 235F is its robust engine. Powered by a reliable X-Torq engine, it offers low emissions and reduced fuel consumption, making it an eco-friendly choice for environmentally conscious users. With an engine size of 25cc, it provides enough power to tackle various trimming tasks, from edging along flower beds to clearing overgrown areas.

The 235F comes equipped with an intuitive starting system, featuring a Smart Start technology that simplifies the ignition process. This innovation reduces the effort required to start the trimmer, allowing users to get to work more quickly and efficiently.

Another notable characteristic of this model is the balanced design and ergonomic handle, which are engineered for optimal user comfort. The trimmer's lightweight construction minimizes fatigue during extended use, which is a crucial aspect for those working on larger properties or landscaping projects. Its adjustable handle further enhances usability by allowing users to customize their grip for a more comfortable experience.

The Husqvarna 235F also boasts a Tap 'N Go dual line cutting system. This feature allows users to easily extend the cutting line by tapping the trimmer head against the ground, ensuring continuous operation without needing to pause or manually feed the line. This efficiency enhances productivity and keeps trimming tasks running smoothly.

Durability is a key aspect of the Husqvarna brand, and the 235F is no exception. It features high-quality materials and construction, designed to withstand the rigors of outdoor use. Whether tackling tough vegetation or performing routine maintenance, this trimmer delivers reliable performance over time.

Overall, the Husqvarna 235F is an outstanding choice for anyone seeking a capable and efficient string trimmer. With its powerful engine, user-friendly features, and durable design, it stands out in the market and is well-equipped to handle a variety of trimming tasks with ease. Whether you are maintaining a garden or managing larger landscaping projects, the 235F is built to exceed your expectations, making your gardening and landscaping work simpler and more enjoyable.
Top Page Image Contents