Unigreen DSP 11 - 16 - 22 - 32, CAMPO 11 - 16 - 22 - 32 Towed Sprayers Parking, Tractor Coupling

Page 10

FIG.3

Hinged parking wheel

Hinged parking stand

Tractor coupling for Towed machines: standard version, with elevator coupling.

Tractor coupling for homologated Towed machines in work position (not suitable for road use).

4.3.1TOWED SPRAYERS PARKING

Don’t stand the sprayers on unstable ground or steep slopes, the machine is designed to be parked safely on compact ground with a slope of up to 8.5° using the relevant chocks (FIG. 3) in the following way:

- Machine parked with drawbar uphill (max 8.5°), place the chocks behind the wheels.

- Machine parked with drawbar downhill (max 8.5°), place the chocks in front of the wheels.

- Machine parked across the slope (max 8.5°), place one chock in front of the drawbar wheel (in the direction of the slope) and the other in front of the wheel uphill.

MOVING THE MACHINE

For lifting, please refer to the general notes above.

CAMPO sprayer models 11 and 16 are fitted with a tilting parking wheel which allows the machine to be pushed over firm, flat ground when the tank is empty. CAMPO sprayer models 22 and 32 are fitted with a tilting parking foot.

To make it easier to move the sprayer when it is not attached to the tractor, the machine and the drawbar are specially equipped for stowing:

-The cardan shaft: swivelling cradle on drawbar.

-The electrical pressure regulator: hosereel support (the pushbutton panel is normally attached to the tractor or stored in the product basket).

4.4TRACTOR COUPLING

=The tractor must be equipped with a 1”3/8 ASAE DIN 9611/A at 550 rpm power-takeoff capable of supplying the power necessary for operating the machine.

=It must have a towing hitch (towed mistblowers with a towing eye or fork drawbar) and a three-point elevator (for mounted machines and a steering drawbar for towed machines) suitable for safely bearing the weight of the mistblower.

=It must be able to tow the maximum overall mass of the machine.

All of the characteristics required are indicated in the fittings tables N° 12 pages 33-34 (the total mass is also indicated on the CE plate on the machine).

WARNING: make sure there are no persons or things near the mistblower before starting the machine and while you are using it.

4.4.1 STANDARD VERSION (ELEVATOR COUPLING)

=Check the diameter of the elevator coupling pins. If necessary position the double diameter pins correctly; there are also appropriate adapter bushes available.

=Check that the weight on the hook can be supported by the tractor (the maximum weights on the drawbar are indicated in the fittings tables N° 12 pages 33-34).

=Check that the steering joint is lubricated with grease.

=Keep the towed machine level with the control of the elevator.

=Retract the parking drawbar wheel (or foot) so it doesn’t get damaged during work.

B: to perform these operations, check the stability of the machine and observe all the indications relevant to safety in the paragraphs 4.3 TRANSPORTATION AND MAINTENANCE, 8 MAINTENANCE, and 8.5 REPAIRS.

=Position the pressure regulator in a place where it is easy to reach from the driver’s seat. Don’t carry liquids under pressure inside the cabin; use the relevant electrical or cable controls for these tractors.

=Check that the pipes of the pressure regulator (or the electrical cables on a pushbutton control panel) don’t get in the way and are positioned at a safe distance from the cardan shaft and the wheels of the tractor.

10unigreen

Page 9 Page 11
Image 10
Page 9 Page 11
Contents USE and Maintenance Manual 10/2007Summary Hand Lances Hose Reel Maintenance Improper use GuaranteeComposition of the Manual Product Responsibility Unigreen spa is not responsible ifKey to the symbols Prohibited USE Using Chemical ProductsIntended USE RecommendationsWeather Conditions Machines Designed to be Used only with Clean WaterCharacteristics and Specifications Driving on the RoadStandards of Reference Noise Level of the MachineUSER’S Instructions Description of the Machine Preliminary Checks Work StationsHand Washing Tanks Transporting and Moving the MachineTractor Coupling Towed Sprayers ParkingStandard Version Elevator Coupling Hook Version Homologated Wheel Spacing AdjustmentParking Foot Hydraulic Connection to the Distributors Cardan ShaftPump Suction FilterControl box for Ergo and Remo electrical regulators Pressure RegulatorComponents of the Pressure Regulator General InstructionsSpraying Computer Optional Manual Premixing Filling the TankMixing Premixer on Cover OptionalPremixer on Hopper with TIN Washer Optional PressioneHOW to USE the LP83 Incorporator TOP-MIX Premixer for Campo 11-16-22E OptionalCircuit Washer and Tank Washer Washing the SprayerWashing with Full Tank Optional Exceed a height of 4 meters Horizontal Booms for Herbacious CultivationsHydraulic Herbicide Booms Indipendent Hydraulic PlantSELF-LEVELING Devices AIR-ASSISTED BoomsVariable Geometry Fan nozzles LiftingDescription of Type of Nozzles Anti-drift nozzlesUseful Information =600xQHand Lances MarkerHose Reel Routine Maintenance MaintenanceProgrammed Maintenance TAB. N Extraordinary MaintenanceMaterials for Demolition Putting Back Into Service After Winter LayupDemolition and Disposal Electrical and Electronic Apparatus Waste EeawUnigreen TAB.1 Characteristics Nozzles ISO Arancio Orange Verde Green Giallo Yellow BLU Blue Rosso REDTAB.2 Characteristics Nozzles Conical ISO Rosso RED Marrone BrownTAB.3-4 Capacity Hand Lances 2500 TAB.5-6 Spraying TablesPROBLEMS, Causes and Solutions Table of Programmed Maintenance Operation50 h 300 h TAB.12A Allowed Fittings TAB aTAB b TAB.12B Allowed FittingsIL Polietilene Rotazionale Member of the group
Related manuals
Manual 32 pages 5.67 Kb

CAMPO 11 - 16 - 22 - 32, DSP 11 - 16 - 22 - 32 specifications

Unigreen DSP Series and CAMPO Series are advanced agricultural sprayers designed to meet the evolving needs of modern farming. The Unigreen DSP (Dynamic Spraying Product) models 11, 16, 22, and 32, along with the CAMPO models of the same specifications, are engineered for efficiency, precision, and reliability in crop protection.

One of the key features of the Unigreen DSP models is their innovative spraying technology. Each model is equipped with a high-capacity tank that allows for extended operation without the need for frequent refills. The DSP series incorporates adjustable booms that provide precise application across various crop types. This ensures uniform coverage and minimizes waste, making it an environmentally friendly option for farmers.

The CAMPO series also boasts similar tank capacities and boom adjustments, making them suitable for diverse agricultural applications. Both series offer customizable options, allowing farmers to choose the configuration that best fits their land and crop requirements.

Another standout characteristic of both Unigreen and CAMPO sprayers is their user-friendly interface. Equipped with advanced electronic controls, farmers can easily monitor and adjust spray rates, pressure, and other critical parameters in real time. This technology not only enhances the sprayers' operational efficiency but also aids in achieving the optimum application rates for different pesticides and fertilizers.

Furthermore, both series integrate cutting-edge GPS technology, enabling precision agriculture practices. This feature allows operators to map their fields, ensuring that every inch is accurately treated, while also reducing the possibility of overlap or missed areas. This precision application reduces chemical usage and ultimately leads to cost savings.

Durability is another primary focus in the design of the Unigreen DSP and CAMPO sprayers. Built with high-quality materials that can withstand harsh environmental conditions, these sprayers promise longevity and consistent performance over time.

In summary, Unigreen DSP and CAMPO models 11, 16, 22, and 32 are technologically advanced agricultural sprayers that combine efficiency, precision, and durability. With features such as adjustable booms, advanced electronic controls, and GPS technology, they cater to the diverse needs of today’s farmers, helping to enhance productivity while minimizing environmental impact. These sprayers are positioned to play a pivotal role in the future of sustainable agriculture.
Top Page Image Contents