Unigreen CAMPO 11 - 16 - 22 - 32 manual Premixer on Hopper with TIN Washer Optional, Pressione

Page 17

4.12.3 PREMIXER ON HOPPER WITH TIN WASHER (OPTIONAL)

 

Campo 22-32 machines come equipped with the TOP-MIX S-41 premixer

 

(FIG. No. 10); this version of the premixer allows independent adjustment of

 

pressure knob, avoiding having to change the work settings of the machine

 

every time you have to do the premixing.

 

To mix the product in the tank proceed as follows:

 

= turn the lever of the delivery deviator to the TOP-MIX position as shown in

 

the pictogram on the machine.

 

= adjust Top-Mix pressure to approximately 10-12 bar by turning control M

 

(the manometer allows you to check the actual pressure)

 

= press lever 4 for a few seconds introducing 3-4 litres of water into the

 

hopper.

 

= open the premix, overturning the cover as shown in the photo and introdu-

 

ce the product to mix into the hopper 1, close the cover again.

 

= press lever 4 to mix the product in the hopper, watching the level of the

 

liquid which could overflow. To prevent overflowing and to help powder

11

products dissolve, open tap 6) to drain into the tank.

 

= after emptying, close tap 6.

 

To wash the tin, proceed as follows:

=open the premix, overturning the cover as shown in the photo

= supply the premix using the control to regulate a pressure to under 3-4

M

bar

Deviator Top Mix

=introduce the tin into the hopper, insert washing pipe 2 into the tin, press the tin onto the pipe until it has been completely washed.

=open tap 6 to drain into the tank at the same time.

=after emptying, close tap 6.

NB: If the tin washer isn’t supplied with clean water and isn’t fitted with the

 

 

 

 

optional electrical pump, you must rinse again by hand with clean water.

 

 

 

 

 

THE LIQUIDS USED FOR RINSING SHOULD BE

 

 

 

 

 

INTRODUCED INTO THE TANK AND BE SPRAYED ON

 

TOP-Mix S41

 

 

FIG. N°10

THE FIELD.

 

 

 

 

 

 

 

 

At the end of the operations, wash the hopper:

 

 

 

 

 

=

check that the cover and all the taps of the premix are

 

3

 

 

 

closed and open the supply tap on the sprayer, delivering

 

9

 

 

1

liquid at a pressure of roughly 10-12 bar (never exceed 15

 

 

 

 

 

 

9

bar).

4

 

 

12

 

2

 

 

 

 

 

=

open safety tap 10.

 

 

 

 

=

press lever 4 to activate jets 3 and 9, watching the

 

 

 

 

 

level of the liquid which could overflow. To prevent

 

 

 

 

 

overflowing, open tap 6) to drain into the tank.

 

 

 

3

 

=

after washing, release lever 4 and close taps 6 and 10.

 

 

3

 

 

 

 

 

 

 

NB: At the end of all of the operations put the lever of

 

11

 

 

 

the deviator back into the work position.

 

6

 

 

 

 

 

 

 

 

 

PRESSIONE

 

 

PRESSURE

LP83

ALLA CISTERNA

 

 

TO THE TANK

 

 

unigreen 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 10/2007 USE and Maintenance ManualSummary Hand Lances Hose Reel Maintenance Composition of the Manual GuaranteeImproper use Product Responsibility Unigreen spa is not responsible ifKey to the symbols Intended USE Using Chemical ProductsProhibited USE RecommendationsCharacteristics and Specifications Machines Designed to be Used only with Clean WaterWeather Conditions Driving on the RoadUSER’S Instructions Description of the Machine Noise Level of the MachineStandards of Reference Hand Washing Tanks Work StationsPreliminary Checks Transporting and Moving the MachineStandard Version Elevator Coupling Towed Sprayers ParkingTractor Coupling Parking Foot Wheel Spacing AdjustmentHook Version Homologated Cardan Shaft Hydraulic Connection to the DistributorsSuction Filter PumpComponents of the Pressure Regulator Pressure RegulatorControl box for Ergo and Remo electrical regulators General InstructionsSpraying Computer Optional Mixing Filling the TankManual Premixing Premixer on Cover OptionalPressione Premixer on Hopper with TIN Washer OptionalTOP-MIX Premixer for Campo 11-16-22E Optional HOW to USE the LP83 IncorporatorWashing with Full Tank Optional Washing the SprayerCircuit Washer and Tank Washer Hydraulic Herbicide Booms Horizontal Booms for Herbacious CultivationsExceed a height of 4 meters Indipendent Hydraulic PlantVariable Geometry AIR-ASSISTED BoomsSELF-LEVELING Devices Description of Type of Nozzles LiftingFan nozzles Anti-drift nozzles=600xQ Useful InformationHose Reel MarkerHand Lances Programmed Maintenance TAB. N MaintenanceRoutine Maintenance Extraordinary MaintenanceDemolition and Disposal Putting Back Into Service After Winter LayupMaterials for Demolition Electrical and Electronic Apparatus Waste EeawUnigreen Arancio Orange Verde Green Giallo Yellow BLU Blue Rosso RED TAB.1 Characteristics Nozzles ISORosso RED Marrone Brown TAB.2 Characteristics Nozzles Conical ISOTAB.3-4 Capacity Hand Lances TAB.5-6 Spraying Tables 250050 h 300 h Table of Programmed Maintenance OperationPROBLEMS, Causes and Solutions TAB a TAB.12A Allowed FittingsTAB.12B Allowed Fittings TAB bIL Polietilene Rotazionale Member of the group
Related manuals
Manual 32 pages 5.67 Kb

CAMPO 11 - 16 - 22 - 32, DSP 11 - 16 - 22 - 32 specifications

Unigreen DSP Series and CAMPO Series are advanced agricultural sprayers designed to meet the evolving needs of modern farming. The Unigreen DSP (Dynamic Spraying Product) models 11, 16, 22, and 32, along with the CAMPO models of the same specifications, are engineered for efficiency, precision, and reliability in crop protection.

One of the key features of the Unigreen DSP models is their innovative spraying technology. Each model is equipped with a high-capacity tank that allows for extended operation without the need for frequent refills. The DSP series incorporates adjustable booms that provide precise application across various crop types. This ensures uniform coverage and minimizes waste, making it an environmentally friendly option for farmers.

The CAMPO series also boasts similar tank capacities and boom adjustments, making them suitable for diverse agricultural applications. Both series offer customizable options, allowing farmers to choose the configuration that best fits their land and crop requirements.

Another standout characteristic of both Unigreen and CAMPO sprayers is their user-friendly interface. Equipped with advanced electronic controls, farmers can easily monitor and adjust spray rates, pressure, and other critical parameters in real time. This technology not only enhances the sprayers' operational efficiency but also aids in achieving the optimum application rates for different pesticides and fertilizers.

Furthermore, both series integrate cutting-edge GPS technology, enabling precision agriculture practices. This feature allows operators to map their fields, ensuring that every inch is accurately treated, while also reducing the possibility of overlap or missed areas. This precision application reduces chemical usage and ultimately leads to cost savings.

Durability is another primary focus in the design of the Unigreen DSP and CAMPO sprayers. Built with high-quality materials that can withstand harsh environmental conditions, these sprayers promise longevity and consistent performance over time.

In summary, Unigreen DSP and CAMPO models 11, 16, 22, and 32 are technologically advanced agricultural sprayers that combine efficiency, precision, and durability. With features such as adjustable booms, advanced electronic controls, and GPS technology, they cater to the diverse needs of today’s farmers, helping to enhance productivity while minimizing environmental impact. These sprayers are positioned to play a pivotal role in the future of sustainable agriculture.
Top Page Image Contents