Unigreen DSP 11 - 16 - 22 - 32 manual TOP-MIX Premixer for Campo 11-16-22E Optional

Page 18

TOP-MIX S41(Campo 11-16-22E)

Example of assembly delivery calibration

nozzle

4.12.4 TOP-MIX PREMIXER FOR CAMPO 11-16-22E (OPTIONAL)

The Top-Mix S41 premixer is also available for Campo 11-16-22E machines as an optional feature.

Its operation is slightly different from the standard version on Campo 22-32 machines; this version of the premixer maintains an independent pressure setting, eliminating the need to change the machine’s operating calibration every time one has to premix.

The differences with the version described above have to do with the calibrated nozzle (see paragraph 4.12.5) and the manometer on the premixer. The TOP-MIX version for Campo 11-16-22E should be used as follows:

a)push the lever of the delivery deviator to the TOP-MIX position as illustrated on the machine.

b)keep the pressure of the Top-Mix at approximately 9-12 bar by adjusting the speed of the cardan shaft (the manometer allows you to check the actual pressure)

c)to mix and to wash the tin, proceed as indicated in the paragraph above.

NB: At the end of all of the operations put the lever of the deviator back into the work position.

4.12.5TOP-MIX CALIBRATED NOZZLE FOR CAMPO 11-16-22E The TOP-MIX S41 premixer comes with a delivery calibration nozzle mounted on the lower block (see photo to the side); two standard nozzles are supplied, to be mounted depending on the pump:

Comet pumps BP125-BP151-BP171-BP205 = Ø7.5 nozzle Comet pumps BP235-BP265-BP280-BP305 = Ø10 nozzle

NOTE: when the Top-Mix is in use with the BP305 pump, pump speed must be limited to 400 rpm.

For pumps from other manufacturers, refer to the equivalent delivery.

4.12.6HOW TO USE THE LP83 INCORPORATOR

The TOP-MIX S41 premixer comes with an LP83 chemical incorporator, which makes it possible to suck the product up directly from the container. It is used as follows:

-turn pressure on in TOP-MIX premixer (see paragraph above)

-turn lever 6 down and suck the product up.

-the product is suctioned, mixed with water under pressure, and directly incorporated in the tank of the machine.

-after incorporating the product in the tank, lift lever 6 back to a horizontal position.

NOTE: To wash the incorporator, put it in the premixer for a few seconds, performing the hopper washing operations described in paragraph 4.4.

18unigreen

Page 17 Page 19
Image 18
Page 17 Page 19
Contents USE and Maintenance Manual 10/2007Summary Hand Lances Hose Reel Maintenance Improper use GuaranteeComposition of the Manual Product Responsibility Unigreen spa is not responsible ifKey to the symbols Prohibited USE Using Chemical ProductsIntended USE RecommendationsWeather Conditions Machines Designed to be Used only with Clean WaterCharacteristics and Specifications Driving on the RoadNoise Level of the Machine Standards of ReferenceUSER’S Instructions Description of the Machine Preliminary Checks Work StationsHand Washing Tanks Transporting and Moving the MachineTowed Sprayers Parking Tractor CouplingStandard Version Elevator Coupling Wheel Spacing Adjustment Hook Version HomologatedParking Foot Hydraulic Connection to the Distributors Cardan ShaftPump Suction FilterControl box for Ergo and Remo electrical regulators Pressure RegulatorComponents of the Pressure Regulator General InstructionsSpraying Computer Optional Manual Premixing Filling the TankMixing Premixer on Cover OptionalPremixer on Hopper with TIN Washer Optional PressioneHOW to USE the LP83 Incorporator TOP-MIX Premixer for Campo 11-16-22E OptionalWashing the Sprayer Circuit Washer and Tank WasherWashing with Full Tank Optional Exceed a height of 4 meters Horizontal Booms for Herbacious CultivationsHydraulic Herbicide Booms Indipendent Hydraulic PlantAIR-ASSISTED Booms SELF-LEVELING DevicesVariable Geometry Fan nozzles LiftingDescription of Type of Nozzles Anti-drift nozzlesUseful Information =600xQMarker Hand LancesHose Reel Routine Maintenance MaintenanceProgrammed Maintenance TAB. N Extraordinary MaintenanceMaterials for Demolition Putting Back Into Service After Winter LayupDemolition and Disposal Electrical and Electronic Apparatus Waste EeawUnigreen TAB.1 Characteristics Nozzles ISO Arancio Orange Verde Green Giallo Yellow BLU Blue Rosso REDTAB.2 Characteristics Nozzles Conical ISO Rosso RED Marrone BrownTAB.3-4 Capacity Hand Lances 2500 TAB.5-6 Spraying TablesTable of Programmed Maintenance Operation PROBLEMS, Causes and Solutions50 h 300 h TAB.12A Allowed Fittings TAB aTAB b TAB.12B Allowed FittingsIL Polietilene Rotazionale Member of the group
Related manuals
Manual 32 pages 5.67 Kb

CAMPO 11 - 16 - 22 - 32, DSP 11 - 16 - 22 - 32 specifications

Unigreen DSP Series and CAMPO Series are advanced agricultural sprayers designed to meet the evolving needs of modern farming. The Unigreen DSP (Dynamic Spraying Product) models 11, 16, 22, and 32, along with the CAMPO models of the same specifications, are engineered for efficiency, precision, and reliability in crop protection.

One of the key features of the Unigreen DSP models is their innovative spraying technology. Each model is equipped with a high-capacity tank that allows for extended operation without the need for frequent refills. The DSP series incorporates adjustable booms that provide precise application across various crop types. This ensures uniform coverage and minimizes waste, making it an environmentally friendly option for farmers.

The CAMPO series also boasts similar tank capacities and boom adjustments, making them suitable for diverse agricultural applications. Both series offer customizable options, allowing farmers to choose the configuration that best fits their land and crop requirements.

Another standout characteristic of both Unigreen and CAMPO sprayers is their user-friendly interface. Equipped with advanced electronic controls, farmers can easily monitor and adjust spray rates, pressure, and other critical parameters in real time. This technology not only enhances the sprayers' operational efficiency but also aids in achieving the optimum application rates for different pesticides and fertilizers.

Furthermore, both series integrate cutting-edge GPS technology, enabling precision agriculture practices. This feature allows operators to map their fields, ensuring that every inch is accurately treated, while also reducing the possibility of overlap or missed areas. This precision application reduces chemical usage and ultimately leads to cost savings.

Durability is another primary focus in the design of the Unigreen DSP and CAMPO sprayers. Built with high-quality materials that can withstand harsh environmental conditions, these sprayers promise longevity and consistent performance over time.

In summary, Unigreen DSP and CAMPO models 11, 16, 22, and 32 are technologically advanced agricultural sprayers that combine efficiency, precision, and durability. With features such as adjustable booms, advanced electronic controls, and GPS technology, they cater to the diverse needs of today’s farmers, helping to enhance productivity while minimizing environmental impact. These sprayers are positioned to play a pivotal role in the future of sustainable agriculture.
Top Page Image Contents